Question about Fisher and Paykel GWL11 Top Load Washer

1 Answer

Maytag performa washer

When I start the washer the water runs out from under the machine onto the floor. I can hear water leaking down the side beteen the wall and the washing tub. it is like I just let hose run straight on the floor. Is this a fixable problem, or do I need a new washer?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert that has over 500 points.

  • Expert
  • 351 Answers
Re: maytag performa washer

Check to see if the tub to pump hose has pulled off

Posted on Mar 03, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

Hello - we have a top loading Maytag Performa washing machine that leaks water during the spin cycle when my wife is washing heavy items that she has placed on center spindal to avoid an unbalanced load....

Maytag Epic is leaking water from the bottom about 8 or 9 inches from the front door back on the right side. Is there and thing i can do. It only about 2 years old or less.

Oct 13, 2009 | Maytag Performa PAV2200

1 Answer

Washer overflowed, water all over the floor, any

you have a leaking pump and need to replace it.

Sep 14, 2009 | Maytag Performa PAV2200

1 Answer

Maytag performa mod#pav2200aww leaking between rinse and spin cyc

My Performa started leaking from the Drain Pump rubber gasket. It had dryrotted. However, Maytag doesn't make a replacement O-ring gasket. You have to buy the whole new pump! Thanks Maytag.

Jul 05, 2009 | Maytag PAV2300 Top Load Washer

1 Answer

Maytag washer performa is over filling with water.

Bad water level switch or pinched hose going to water level switch.

Feb 21, 2009 | Maytag Performa PAV2200

1 Answer

Water on floor after running load

with a stiff putty knife you can releace the clips one on each side to lift the top two screws hold the front on fill the machine and advance throught the cycles to see where the water is coming from checkthe hose between the tub and pump with a flash light look between the top of the gear case ( transmition) and the bottom of the tub for water leak if there you need a new transmition and seal kit you are looking at about 200- 250 in parts hopefuly it will be the hose between the tub and pup the is less than 50

Jan 19, 2009 | Maytag Performa PAV2200

1 Answer

Maytag Performa PAV2300 washer leaks

Hi hindsr

I dont know for sure what it is but i would guess that the tub is going off balance during the spin just befor the rinse and the tub is not centered. so what happens is watter hits the top of the tub and runs down the back (inside) and thats where the water is comming from.


Sep 22, 2008 | Maytag Performa PAV2200

1 Answer

Maytag performa pav2300

Just rehook the clear tube back onto the air dome (back right side of drum), drain any water from the drum, the refill, pressure switch will reset itself. Start to fill on small load size first, then move up when washer starts to be sure it reset all the sizes.

Aug 06, 2008 | Maytag Performa PAV2200

1 Answer

Maytag Performa washer dead.

Your door lid has a switch that makes these functions work.First open the lid and look at the right side of it.Does it have a arm on it?If it does follow the direction where it is going to hit and now listn closely while your lifting the door up & down at this contact  can you hear it click?If its not clicking  or the arm is broken  off the lid replace  the lid switch/or the broken lid switch arm.

Apr 28, 2008 | Maytag Performa PAV2200

1 Answer

Maytag Performa Washer

when you put the drain hose on the floor the water will ALWAYS drain out. When the drain is in the proper location (above the height of the tub) and the water is still leaking, if its leaking as it fills you might have a loose hose,or a cracked water inlet valve. If after the water is in the tub and its still leaking you have a bad seal.

Jul 03, 2007 | Maytag Performa PAV2200

1 Answer

Maytag Washer

Is the machine belt driven? Look under the washer and see if the belt is laying on the floor. If so, just get a new belt.

Dec 04, 2006 | Maytag Performa PAV2200

Not finding what you are looking for?
Fisher and Paykel GWL11 Top Load Washer Logo

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides