Question about Office Equipment & Supplies
I have an HP PSC 1500 All in One printer. problem i'm having is: all the lights are on and the printer carriage will not move (to the right when it is turned on). it makes a short squeek but it doesn't move. help! i tried everything - disconnecting all cords and reconnecting; cleaning rollers, etc.; looking for any obstructions; there is no reset function for this printer.... any suggestions? i have had it as long as a friend of mine and hers still works. i do not overuse mine either....thanks
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: HP C4180 Carriage Jam
Try the steps mentioned in the link Bellow:
Also make sure you should Unplug the power cord when there is
still power in the unit, take out both the ink cartridges and apply little more pressure and move the carriage too and fro untill you feel it is moving freely (Dont worry it wil not break)
Posted on Sep 01, 2008
SOURCE: psc 2110 carriage jam
SolutionStep one: Perform a power reset and connect the printer directly into the electrical outlet Remove all the paper loaded in the main input tray.
Make sure that the product is turned off.
Disconnect the USB cable from the back of the product.
Disconnect the power cord from the product.
Disconnect the power cord from the electrical outlet and wait 10 seconds.
Reconnect the power cord directly into the electrical outlet and check for the following.
Make sure that the power cord used is the one provided with the product.
If a computer is connected to the product, make sure that the computer is connected to a grounded (three-prong) wall outlet.
Make sure that the power cord is firmly connected to both the product and the power supply.
Reconnect the power cord to the back of the product.
Press the power button ( ) to turn on the product.
Reconnect the USB cable to the back of the product.
If the issue is resolved, proceed to Step six: Print a self-test page.
If the issue continues, proceed to the next step.
for more information please go to below link>>
Thanks for using FixYa.
Posted on Feb 03, 2009
SOURCE: Flashing orange lights
WASTE TANK NEEDS TO BE EMPTIED
GO ON LINE AND TYPE
CANON 850i INKJET PHOTO PRINTER 7 BLINKING LIGHT YELLOW
AND YOU CAN FIND YOUR HELP YOU NEED
ROD THE CANDYMANGNADY
Posted on Feb 04, 2009
Check the gear on the left side of your printer where the disk encoder strip is attach,the gear is not holding the metal shaft your need to replace that gear. The problem is in the inner hole where the shafting is attached.
Posted on Nov 03, 2009
Tips for a great answer:
May 10, 2014 | HP PSC 1510 All-In-One InkJet Printer
Jan 22, 2012 | HP PSC 1510 All-In-One InkJet Printer
Sep 29, 2009 | HP PSC 1510 All-In-One InkJet Printer
May 22, 2009 | Office Equipment & Supplies
Jan 16, 2009 | HP PSC 1510 All-In-One InkJet Printer
Jan 10, 2009 | HP OfficeJet 7310 All-In-One InkJet...
Aug 27, 2008 | HP PSC 1510 All-In-One InkJet Printer
Aug 06, 2008 | HP PSC 1510 All-In-One InkJet Printer
Jun 13, 2008 | HP PSC 1510 All-In-One InkJet Printer
Jan 30, 2008 | HP PSC 1510 All-In-One InkJet Printer
Jun 20, 2018 | Konica Minolta bizhub Office Equipment &...
62 people viewed this question
Usually answered in minutes!