Question about Akai PT4298HD Rear Projection Television

2 Answers

My akai tv

My tv will not turn on. I push the power button and the timer light will flash 6 time then go off but the tv will not come on. The voulem will work throught the streo. Is it the bulbs in the back.

Posted by on

  • 2 more comments 
  • ramfan Jan 12, 2008

    TV won't turn on . Power light blinks then stays on. Any suggestions? I am told there is a "problem with the power supply and the high voltage" What does this mean and what would the estimated repair cost be?

  • komit Jan 17, 2008

    I have had a 27" akai for less than a year a now the power switch will not work. I sent it out thru Sears and a repairman called back and said it needed a inverter but could'nt get the part.

  • akaiowner Jan 28, 2008

    I have the same problem, is there anyone to call or email with the company to get trouble shoot solutions?

  • Anonymous Feb 08, 2008

    my tv light timer light keeps blinking but nothing happens. the tv stays blank. I really don't know what really happened because i was watching tv an hour before this happen. please let me know how i can solve this problem

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 62 Answers

Call 800-726-4405 - to see if the power supply is available - if the part is not available - the Manufacturer must exchange your television. 8 - 12 week turn around - but it's more like 12 - 16 weeks even if it is past the one year manufacturer's warranty - by law, the manufacturer must provide parts for up to 5 years.

Posted on Mar 29, 2008

  • Hasan Guyon Mar 29, 2008

    Inside info - Email akai@fox-international.com

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Governor:

    An expert whose answer got voted for 20 times.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 77 Answers

IF IT IS A POWER INVERTER TRY EBAY OR PARTSTOR.COM SAME FOR THE POWER SUPPLY
NOW AS TO THE POWER SUPPLY--- ALL POWER TO THE HOUSE IS IN A.C. (ALTERNATING CURRENT ) THE POWER SUPPLY CHANGES THIS TO D.C. ( DIRECT CURRENT ) WHICH IS WHAT ALL OF THE STUFF IN YOUR HOME RUNS ON THIS PART CAN SOMETIMES BE A LITTLE HARDER TO GET BUT GO WITH THE ABOVE LISTED SITES OR DO A GOOGLE SEARCH FOR IT

Posted on Mar 24, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have the pth5498 and my tv won't turn on. My


Timer is not the problem---the tick ticking sound is the shutdown circuit in the set that has been triggered by a short somewhere likely in the high voltage area or the convergence circuit---shop repair---says Akai but I suspect set was made by Samsung who owned that name at one time.

May 25, 2012 | Akai Televison & Video

1 Answer

Akai rear projection tv suddenly stopped working.


This set with Akai is actually made by Samsung (they own and use the Akai name).

If lamp light etc and you have heard a cracking sound it may be the color wheel.

You can remove the lamp and look where it faces--look and the wheel can be seen----is it shattered or missing plastic pieces?

The wheel commonly fails in this fashion and is turning at over 12,000 rpm. The set will detect if the wheel is stopped or moving too slow and just what you describe will happen.

Wheel is widely available and You Tube has video instructions for replacing them by model number.

Questions?


3_29_2012_2_46_37_pm.jpg

Mar 28, 2012 | Akai PT5492S 54" Rear Projection...

1 Answer

Have lost instructions to Emerson universal jumbo remote


Using Code Search:

1. Turn on the device you want to program into the remote.
2. Point your remote control at the device
3. Press and hold the "Code Search" button for about 3 seconds until the light on the remote stays on.
4. Press the button on the remote for the device you want to program. Push the "TV" button to program the TV, press the "DVD" button to program the DVD player, etc. The light on the remote control will blink and stay on.
5. Slowly press and release the power button repeatedly until the device turns off. Each time you push the power button the light should blink once.
6. Press "Enter" to save the code into the remote and the light will turn off.

Program a Manual Code:

1. First turn on the device that you want to program such as your TV or DVD player.
2. Point your remote control at the device.
3. Press the button on the remote that corresponds to the device. If you want to program the TV, press the TV button.
4. Press the "Code Search" button for about 3 seconds until the light stays on.
5. Enter the code for your device using the number pad. The light will blink each time you push a button. If the code works, the light will turn off. If the light flashes, that means the code did not work. There may be multiple codes for a device. If a code does not work, start from the beginning by holding down code search until the light stays on and use a new code.
6. Press the power button to test if your device turns off. It it does not turn off, repeat the process with a new code.

Retrieving the Code for your Device:

If you used the code search function to program your device and want to know the code for future reference, you can retrieve the code from the remote. To do this:

1. Press and hold the Code Search for 3 seconds until the light stays on.
2. Press the device button for the code you want to retrieve. Press TV to get the TV code, etc. The light will blink once and stay on.
3. Press the number buttons from 0 to 9. When the light blinks once, that signals the first number of the code.
4. Repeat for the 2nd and 3rd digits of the code. The light will turn off after you retrieve the 3rd digit.

Programming the Sleep Setting:

1. Press and hold the "SLEEP" button until the light stays on.
2. Use the number pad to enter 2 digits for how many minutes to use for the timer (01 to 99 minutes). The light will turn off and start timing.
3. Make sure the remote is pointing at your device.
4. To cancel the sleep timer, press the power button once or hold down the sleep button until the light flashes once.

Here is a list of the Emerson Universal Codes:
http://www.jumboremotecontrol.com/remote_control_code_list.html

Here is a copy of your manual: http://www.jumboremotecontrol.com/innovage_jumbo_remote_manual.PDF

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Mar 08, 2011 | Televison & Video

1 Answer

MY Sharp LC46D62U wont turn on


Power and OPC LED lights flashes?Common on Sharp LCD tv.Tv is still useable.Tv have Tuner signal board problems.Every times Power and OPC LED lights flashes.Just push the remote power button again and wait.Sometimes Power and OPC LED light will flashes require push power again wait again Power and OPC will flashes two or three time push power button and wait.Must do this two or three time before the backlight will light up and tv work.

Jan 07, 2011 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

Tv wont turn on used it for two months and one day it turns on then the power led light flashes and the opc led light ...


This tv still under warrenty?Yes take ur warrenty repair.This problems very common on Sharp LCD tvs.I have one too.This tv have a Tuner signal board problems.But this tv still use able.Just push power button again after the POWER and OPC flashes.POWER and OPC some will flashes again and wait just push the power button again and wait.Sometimes have to push power buttons and wait power button push out of three or four times power button push POWER and OPC flashes.Than tv will work again.

Jan 06, 2011 | Sharp LC-52D64U 52 in. LCD HDTV

1 Answer

Sony HD Projection TV KDP-57WS550, timer light blinks 5 times and repeats sequence. When power button is pushed sound comes on briefly, no picture, then TV goes off. Please advise.


Mine did this after a power flash. Lights blinking 5 or 6. They blink fast lol. I have sound till tv powers back down. Front yard bond fire? Or any ideas? Thx.
10_18_2015_2_55_53_pm.jpg

Dec 25, 2010 | Sony Grand WEGA KDP-57WS550 57" Rear...

1 Answer

I have a '96 samsung 25" tube tv. model # TXE2546 - series # 3CAG700429. when i turn it on it has always made a click sound a couple of seconds afterwards. the "power & timer" led light flashes about...


This problems the FBT-the Flyback Transformer have cold solders.Must resolders the FBT.The right side wall of the FBT-the "H" horizontal transistor,must be also resolder too.










































































































































































































































































































































































































































































































































































































































































Oct 18, 2010 | Samsung TXJ2754 27" TV

1 Answer

AKAI 32" Power Malfunction


check all 1000mf-16v & 470mf-16v in power supply. may be blow.

May 06, 2010 | Akai LCT2662 Television

1 Answer

THE TV IS CUTTING OFF BY ITSELF AND THE OPC LIGHT IS BLINKING


This problems very common on Sharp Tv.Do ur tv LED power light turn on solid first.Few mins,than LED,OPC flahes.Power LED,OPC flashes,push power button again,do this at leat 5 or 6 times somtimes the backlight will come back on and work.The power LED,OPC light flashes,turn off/on more than 5 or 6 times don't work.Ur Tuner signal board is dead,must replaced.

Mar 30, 2010 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

Not finding what you are looking for?
Akai PT4298HD Rear Projection Television Logo

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2337 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

The Knight
The Knight

Level 3 Expert

76016 Answers

Are you an Akai Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...