Question about Canon PIXMA iP4000 InkJet Photo Printer

1 Answer

3 yellow flashes, then 1 green on a Canon PIXMA Ip4000

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

3 flashes is a GREAT symptom report. We need some more than that, but it does give us a direction.

If this is a "Service Call Error", it will be accompanied by an on screen message that includes a "6000" error code.
Here are the possible solutions....
- Timing sensor unit (QM2-1213)
- Timing **** disk film (QC1-4833)
- Feed roller ***'y (QL2-0598)
- Platen unit (QM2-1215)
- Logic board ***'y (QM2-1548)*1
- PAPER FEED MOTOR (QK1-0550)

These solutions are not for the novice, but are user servicible for many out there.

If this is a "Operator Call Error", it will also be accompanied by on screen error codes

Paper jam. [1300]
Paper jam in the under guide. [1304]
Paper jam in the rear guide. [1303]
Solution: Remove the jammed paper, and press the Resume/Cancel
button.
OR

Front door closed. [1250] Open the paper output tray.

Get a free copy of the service manual by contacting me at www.Equipmentcity.net

Posted on Oct 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon Pixma IP4000 - Printer on/off button flashing orange light X 5 and then green. I have just re-newed all the ink cartridges Can you help ? will i be able to re-set printer ?


5 times orange means you need to replace the print head.....if the led are Blinking in Orange and Green Alternately you need to replace the sheet feed unit.

Mar 28, 2011 | Canon PIXMA iP4000 InkJet Photo Printer

1 Answer

I have a Canon Pixma iP4000 with a baffling problem. When I turn it on, the lights flash in this pattern: 4 green, 5 yellow, 1 green, 5 yellow, the yellow light stays on for a moment, then the printer goes...


Follow these steps to reset the printer:

1. Turn the printer off with the Power button (if available).

2. Disconnect the data cable from the printer (not applicable to WiFi, Bluetooth or Infrared) .

3. Unplug the printer's power cord for approximately 10 minutes, and then plug it back in. If troubleshooting a communication issue, reconnect the data cable (not applicable to WiFi, Bluetooth or Infrared).

4.

Jan 27, 2011 | Canon PIXMA iP4000 InkJet Photo Printer

1 Answer

Pixma ip4000 prints blue instead of green


The fault could be -
The yellow cartridge is empty
or
The yellow ink nozzles are blocked
Because green is made up with blue and yellow colors.

Sep 12, 2010 | Canon PIXMA iP4000 InkJet Photo Printer

1 Answer

My Canon printer ip4000 power button keep flashing 1 green & 5 yellow flashes. What is wrong ?


It may indicate a printhead error. Look at the followng instructions at the Canon website:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=257&modelid=10239

Apr 20, 2009 | Canon PIXMA iP4000 InkJet Photo Printer

1 Answer

About canon pixma ip4000 problem


1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal.
.

This is only a temp measure,it will reset the counter inside your printer to allow you to print again....but if you got same prob as i have you will need to get teh waste ink absorber changer

Oct 22, 2007 | Canon PIXMA iP4000R InkJet Printer

1 Answer

Printer refuses to work


You will need pro help with this - so call the man meanwhile browse through this list http://www.fixya.com/support/p360552-canon_pixma_ip4000_inkjet_photo_printer/solutions

May 17, 2007 | Canon PIXMA iP4000 InkJet Photo Printer

Not finding what you are looking for?
Canon PIXMA iP4000 InkJet Photo Printer Logo

647 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1917 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...