Question about Whirlpool LAB2700ML Pedestal Drawer for Duet Washers & Dryers

1 Answer

Whirlpool GEW9200LW1 won't run

Clothes in dryer, set time, press button to start, hear a click sound and Sensing light comes on but no tumble. Found troubleshoot guide and looks like a harness or the mother board. Wondering if it may be something cheaper or easier?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 128 Answers

Could be that the belt has broken and triped the belt safty switch. If you reach into the dryer and rotate the drum in a clock wise rotation and it moves extreamly freely. It is probably the belt.

Posted on Dec 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a whirlpool duet gas dryer model ggw9200lw1. when i press the start button it clicks once but wont run.


First, check the door switch. Push and release it by hand and you should hear a click. If no sound, replace the door switch with this part.
If the switch is ok, press the cancel button on the machine. Then do this. press and hold the start button for 2 seconds then release wait 2 seconds and press and hold again for 2 seconds continue this pattern until the dryer goes into test mode. You will see all the lights on the control light up. press each button on the control one at a time 3 times each. (Do not press the cancel button) until the dryer begins to run. When the dryer starts to run then press the cancel button. Then your machine should function properly.

Oct 19, 2012 | Whirlpool Duet 7.0 Cu. Ft. Super Capacity...

1 Answer

Kitchenaid prestige dryer will not tumble


I fixed one that would not run last Halloween. A Kenmore very similar to a kitchen-aid dryer:

4 Wheel dryer DE-mystatified

Jul 08, 2012 | Dryers

1 Answer

Whirlpool Dryer GEW9200LW1 skip digits when set to dry


Hello,

If the clothing comes out dry within a normal time,usually 40 minutes or less. Whats happening is the computer is recatulacting the time remaining to dry a load of clothes as it senses they may still not completly dry or even will drop off some time if clotes are dry before time computer calculated at start of cycle.

Gene

Aug 16, 2011 | Whirlpool GEW9200L Electric Dryer

1 Answer

Whirlpool duet dryer model # GEW9200LW1, when powering up goes directly to touch up, and will not start. thermal fuse ok


Dirty moisture sensing strips? Have you tried cleaning them with windex?e03f8f0.jpg

Number 34 these measure resistance by picking up wetness from the clothes. Dryer sheets can coat these with a non penatrable film which fools the brain into thinking them clothes is dry so it moves towards the cooldown mode and shuts off with wet clothes. Clean them sensor strips real good and party on!

Oct 11, 2010 | Whirlpool Dryers

1 Answer

My GEW9200LW1 Dryer has the following problem. the power lights all come on, but after I set the type of cycle and press start, it clicks once and then it hangs up with the sensing light on. I pulled the...


Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

..

Oct 11, 2010 | Whirlpool GEW9200L Electric Dryer

1 Answer

DUET DRYER MODEL NO. GEW9200LW1. DRYER WON'T SPIN. CONTROL PANEL LIGHTS UP, TIMED DRYING SELECTED, HOLD START BUTTON DOWN AND NOTHING HAPPENS. ALL I HEAR IS A CLICKING NOISE AT LEFT REAR OF DRYER. IT...


Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

Oct 11, 2010 | Whirlpool Dryers

1 Answer

Dryer problem


You need to listen for the motor working ? Open the dryer door hold the door switch in and start the dryer . A buzzing sound may indicate a bad motor. If you hear a slight spinning noise ,it may just be the belt.

Sep 24, 2008 | Dryers

2 Answers

Whirlpool dryer,duet


check the door switch for operation, if the machinr thinks the door not closed == no operation

Jan 11, 2008 | Whirlpool GEW9250 Electric Dryer

1 Answer

My Dryer Heats but won't tumble


do you hear a humming noise? and is air coming out the rear if so the belt has broke if not the motor has gone bad let me know what you find

Jan 08, 2008 | Whirlpool GEQ9800P Electric Dryer

Not finding what you are looking for?
Washing Machines Logo

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal De

Level 3 Expert

2699 Answers

yadayada
yadayada

Level 3 Expert

79865 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...