Question about Panasonic PT-47WXC43 47" Rear Projection Television

1 Answer

How do we hook up our Direct TV sattelite so that we can get PIP/split screen to work

We have a panasonic 47" 1080i with PIP and can't get the sattelite to give us a split screen with 2 different channels

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: How do we hook up our Direct TV sattelite so that we can get PIP/split screen to work - Panasonic PT-47WXC43 47" Rear...

Can't be done witout 2 seperate receivers

Posted on Sep 05, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a Panasonic TX-48CX400B and can't find the pip button how do I get split screen off tv.

The PIP mode is only used to show the current source if you are also looking at the Internet portal mode. After you set up your network connection, press the Internet button on the remote to access the network options. (That's the button with the globe and an arrow that curves up from the bottom right of the globe.) Press OK to select an internet option.

See page 28 of the manual for more information. (I found the manual for the TX-48CX400E here, , and looking through the list of LCD TV models. Then click on the Downloads link and then choose the version of the manual you want. From here, you need to accept the Panasonic terms of use for their downloads. The direct link to the manual is . This is the same model sold in another country.)

I hope this helps.

Cindy Wells

Nov 25, 2015 | Panasonic Projection Televisions

1 Answer

I have a large screen panasonic tv. The lamp

Turn On tv.
Press and hold Volume Down button on TV Front and PIP/ SPLIT button on Remote at same time for 6 Seconds to reset Lamp Timer and tv will show you timer reset message screen.
Hope this info will help you.

Mar 31, 2010 | Panasonic PT-50LC13 50" Rear Projection...

1 Answer

How to split the screen to look at 2 channels.

try looking under your TV's menu, find the pip or split option and set them up, then on your remote, you should have a pip/split button..see if you can now watch tv with pip or split. If you need more help please be more specific about what the tv is doing when you push those buttons on the remote etc.

Dec 27, 2009 | Panasonic PT-47WX53 47" Rear Projection...

2 Answers

Resetting lamp hour meter on panasonic tv

press volume down on tv and pip or split on remote

Nov 19, 2009 | Panasonic PT-56DLX25 56" HDTV

1 Answer


I can help you reset the lamp timer for your Panasonic PT-52LCX66 Projection HDTV. The buttons used are the TV's volume down and the remote's number 0, not the 'split' or pip for your model.

Follow the steps in my Fixya Tip for the complete lamp timer reset procedure.

I hope that helps.

Oct 10, 2009 | Panasonic PT-52LCX66 Projection Television

1 Answer

Panasonic LCD PT 50LC13. Nothing happens when I push PIP/SPLIT

Make sure you put the lamp DOOR back IN PLACE before turning your TV back on. Then it should all be just ducky.

Mar 21, 2009 | Panasonic PT-50LC13 50" Rear Projection...

2 Answers

How to reset the meter of lamp

You need to have your Panasonic remote.
1. Make sure the power cord is plugged into a properly grounded outlet and turn on the set with the power button on the projection unit or the remote control.

2. While holding down the (VOL -) key on the projection unit press the PIP or SPLIT key at the same time. Hold it for longer than 5 Seconds. The PIP or SPLIT key is model specific:

PIP for Models:

SPLIT for Models:

3. When the unit resets the lamp timer it will display a screen on the TV indicating it was reset to zero. You press recall on the remote to exit.

You will find a PDF of the instructions at this site:

Aug 23, 2008 | Panasonic PT-50LC13 50" Rear Projection...

1 Answer

Split screen question

Ah split screen just another way of getting two picture in one screen, or sport for he and Opra for her.
Fisrt you must understand what split screen is, it is taking two information from different source and sending the info to the micro to devide the info for two seperat image.
Well something like that but I know you were inpress,
Yes you can. Take the main source you or using I would say the TV box in cable connection or av1 and then your DVD or and VCR to source av2 or 3. When presing split screen or pip you will get one screen showing the main source your tv box and the second your dvd (or VCR) in the source input solector you should be able to change the second amage input with input solector and the tv box change the other.
Oh what a butiful life aint it.
Try this with 7 different source, Cable, satelite, fta, dvd, camera, gaming sytem, and computor,... well that another chapter.

What about Bob

Feb 29, 2008 | Panasonic PT-50DL54 50" Rear Projection...

1 Answer

Split screen question

Only if you have 1 Ant input, if you have ant 1 & 2 then you don't need a vcr for split screen.

Feb 29, 2008 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Hitachi ultravision

PIP requires split signal source or two signal sources....
With cable, you can split before source box ,with satellite you
can't.....consult owner manual........T.

Dec 13, 2007 | Projection Televisions

Not finding what you are looking for?
Panasonic PT-47WXC43 47" Rear Projection Television Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1142 Answers

The Knight
The Knight

Level 3 Expert

66578 Answers

Are you a Panasonic Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides