Question about OKI MICROLINE 320 Turbo Matrix Printer

3 Answers

How do i reset to factory specs

How do i reset the printer.

Posted by on

  • 1 more comment 
  • Anonymous Feb 13, 2008

    MY PRINTER IS PRINTING IN SMALL LETTERS & NUMBERS,.HOW CAN I ADJUST THE SYSTEM TO PRINT BIGGER LETTERS & NUMBERS..ON PRINT QUALITY IT USE TO BE AT (UTL) NOW IT STAYS AT (NLQ)..CHARACTER PITCH STAYS AT #17...MY CUSTOMERS ARE ALWAYS COMPLAINING THAT THEY NEED A MAGNIFYING GLASS TO READ THEIR INVOICES,..HOPE YOU CAN HELP ME OUT HERE...BY THE WAY AM IN A SMALL TROPICAL ISLAND IN THE PACIFIC CALLED GUAM...

  • KoaM Dec 02, 2008

    My Oki Microline 320 Turbo will print UTL okay only from the printer server, all networked workstations will only print in NLQ. The other workstations were previously printing reports in UTL, but after upgrading the network server (not the printer server) with a newer version of our POS program, the

    problem with the print quality (which prints some reports in tiny font sizes) came up. Even MS Word documents printed in NLQ, not just reports from our POS system, so the problem isn't isolated in the program were running, it seems to be related to the networking.

  • kooldw Jan 05, 2009

    my OKI microline 320 turbo 9 pin wont stay on UTL it keeps jumping back to NLQ

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

To reset the the printer to factory defualt

Turn the printer off and hold down the SEL and LF buttons while you trun the unit back on this will resest the menu.


Turn the printer off and hold down the Park and Quiet buttons while you turn it back on, this will reset the TOF(top of form).

Posted on Jan 16, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 40 Answers

Hi ,
Press FF/Load and Tear button together and power on while holding these 2 buttons,this will reset the printer.
Dezzi

Posted on Jan 09, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

Its been a long time since i seen one of these!
It's a combination of buttons im not sure which ones, try turning it off and press the online button while turning it on, your going to have to experiment with the different buttons and combo of buttons .

Posted on Dec 18, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do I reset to factory spec - Samsung SL-M3320


Dear
press MENU,#,1,9,3,4,MENU. within 3 secs. select TECH MODE.
scroll to display SERVICE FUNC. entering to this factory reset may done using CLEAR ALL MEM.
Thanks.

Feb 13, 2015 | Samsung ProXpress M3320ND Laser Printer...

1 Answer

Scans in enlarged mode-how do i reset to normal or is there a reset button that resets back to factory specs


I love how I find my own solutions by helping others on this site! Here--try this link, straight from Brother. If you read the very last entry on the page, you will find how to perform a factory reset via the front control panel (it's buried among the options there). >>CLICK HERE<<

Mar 21, 2011 | Brother MFC 3820CN All-In-One InkJet...

1 Answer

Printer will not function. Power light on, fax light on. Won't turn off with buttons. Disconnected power and usb and reconnected, still nothing. Can it be set back to factory specs?


Refer to this article How to Restore the Factory Defaults on the Lexmark X4250/X4270 for instructions on how to reset the printer to its factory settings. If the printer still won't turn off using the power button, unplug the power adapter from the printer. The power adapter is the rectangular black brick behind the printer where the power cord plugs is plugged in. Replug after 30 seconds. That should give enough time for the printer to refresh itself. Thanks.

Nov 11, 2010 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Epson RX680 Printer - How do I reset the firmware to defaults?


you will need the adjustment program to be able to reset your printer to the factory setting.. and it's really not recomm to reset the firmware as you risk of damaging the unit further.
what about the panel light.. how does they blink when the moment you switch it on?

Jun 08, 2010 | Epson Stylus Photo RX680 Printer

1 Answer

ETrex Venture HC Car GPS Receiver: How do reset unit back to factory spec's...


Hi!

From your owner's manual, to reset to factory defaults (Page 34)
http://www8.garmin.com/manuals/eTrexVenture_OwnersManual.pdf

Select the route page options button and press the Thumb Stick in to access the options menu.
Select "Restore Defaults" and then press in on the Thumb Stick to restore factory settings.
Hope this is of some help to you.
Good Luck!


May 07, 2010 | Garmin eTrex Venture HC GPS Receiver

1 Answer

Reset to factory specs for blackberry curve 8330


Hi,

how to reset the Curve back to factory state (a complete wipe-out). Please note if you just want to reboot the device, you only need to take out the battery.

To reset the phone back to factory state:
Go to Options -> Security Options -> General Settings
Press the BlackBerry Menu key and select "Wipe Handheld" and type in "blackberry"

Thanks.

Jun 04, 2009 | RIM BlackBerry? Curve 8330 Cellular Phone

1 Answer

Need to reset unit to factory specs


Called up the AVmap site online and the answer was right on their website.

May 01, 2009 | GPS

1 Answer

HP LJ2420 Not recognizing toner


remove left side cover, in the center there is a system of 2 black plastic levers, one has come loose from its mounting. Its pretty straight forward to see how it should go back.

Apr 01, 2009 | HP LaserJet 2420 Printer

1 Answer

How to reset to factory specs??


Enter the SETUP menu and select RESET. You'll be prompted to reset two sections. Answer YES to both and everything that can be set to default will go back to the factory default state.

Jan 13, 2008 | Panasonic Lumix DMC-TZ1 Digital Camera

Not finding what you are looking for?
OKI MICROLINE 320 Turbo Matrix Printer Logo

1,291 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Office Equipment & Supplies Experts

Don  Farrell
Don Farrell

Level 3 Expert

1018 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Dominion Computer...
Dominion Computer...

Level 2 Expert

312 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...