Question about Garden

1 Answer

How do you replace the pull cord that broke? - Garden

Posted by on

  • Chuck
    Chuck May 11, 2010

    Instructions for replacing a pull rope depends upon what engine is on your lawn mower. This is not a generic repair. Each manufacturer is different in the way the engine is assembled. If you will post either the engine Make & Model or the Craftsman Model number of the mower I will be happy to try to help you

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

On a lawnmower, you just remove the top housing (side for tillers and other lawn equipment). Knot one end of the cord and put it in the slot in the wheel. Make sure when you wind it that the wheel will turn when you pull the cord. If it won't turn, wind the other direction. After winding feed the loose end thru the hole in the housing and replace the housing. Attach the loose end to your handle, cutting off any excess.

Posted on Oct 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace a pull cord for pm 605 mcculloch chainsaw?


First remove the pull starter housing.
The next part is tricky. You'll have to release and unwind the spring that rewinds the pull starter cord. Remember how you do this because after replacing the cord, you'll have to rewind the cord and spring before inserting it back in the housing.
re-attach the pull cord housing to the chain saw.
Hope this helps.

Oct 19, 2014 | McCulloch Pro Mac 605 610 645 650 655...

1 Answer

We broke the pull cord and after pulling the cord won't recoil to proper position.


remove the cord assembly ,, either the cord is off track and needs to be rewound or it broke and needs replacement

Jul 16, 2011 | Toro Super Recycler Super Bagger Lawn...

1 Answer

Pull line broke.


Remove the starter housing from the engine, then unwind the rest of the cord from the reel. With both parts of the cord, measure the total length of cord plus some extra for knots. Take one of the remnants with you to a saw service shop for replacement cord purchase. You might even take the entire starter mechanism and have them rewind the cord for you if you don't feel comfortable about installing the new cord. When done, just reinstall the starter on the saw and attempt a start. Good luck!

May 17, 2010 | Garden

1 Answer

Pull cord broke on my craftsman gas push edger. I replaced cord but when I pull cord..It wont rewind but I can hear it trying to start


It sounds like you did not properly rewind the spring that is behind the spool that the cord would around, that spring is what rewinds the cord after pulling the cord.

May 05, 2010 | Craftsman Garden

2 Answers

Pull cord stuck in the out position


this can be caused by sevral things inside the pull cord hub assembly. examples: Dirty inside & needs taken apart & cleaned. something logged inside, plastic spool tabs broke, spring/s broke, levers broke or any of these items could just be to worn. replacement parts should be available.

Oct 04, 2009 | Husqvarna Craftsman 36cc, 16 In. Gas Chain...

2 Answers

Self Propel Cord Replacement too loose!


measure it from the old cord thats the easiest way ?

Aug 26, 2009 | Toro Lawn Mower With Toro Power Tools

1 Answer

Pull Rope Broke... How do I replace it and still have it retract?


with the cover in your hand pull the cord out with a pair of needle nose pliers or a little screw driver and where the cord go through the case and before the wheel. pull 5 to 10 inches out and wrap the cord around the wheel turning the wheel but not winding the cord on., do 3 or 4 wraps then pull the handle to get all the cord out and let it retract. if not enough rewind just repeat with 2 wraps

Jul 22, 2009 | Homelite Consumer Products 4.0 Amp, 13 In....

1 Answer

Pull Cord Broke


the pull cord is same as the regulare pull cord lights.(real cheap one).
bring the fixture to any home center ot hareware store, they should be able to get you what you need.

Nov 12, 2008 | Electrical Supplies

Not finding what you are looking for?
Garden Logo

Related Topics:

266 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers

roeb

Level 3 Expert

594 Answers

john h

Level 3 Expert

12650 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...