Question about Lexmark X5150 All-In-One InkJet Printer

4 Answers

Document printing hangs at 99%

Printing status display stays at 99% and document says "printed...deleting" - nothing else will pring

Posted by on

  • 3 more comments 
  • lhood41 Jan 05, 2008

    Lexmark X5150's printing status displays hangs up at 99% and nothing else can be printed.



    lhood41@hotmail.com

  • Lexmark 5150 Jan 10, 2008

    I have the same problem. However, it will print when the computer is restarted, which is very aggravating to do after each print sent to the X5150. I am assuming that it can be resolved when lexmark creates a Vista driver for the all in one printers.

  • andrew0464 Nov 07, 2008

    I have the same problem with a Lexmark X1270 on Windows XP SP3. I find turning the printer off and on again clears the job from the queue.

  • ehgan Nov 19, 2008

    I have the same problem. My model is x2250. I can clear the print job by restarting the computer but when I submit another print job after that, the same error (printing status 99% and hang after that) recur.

  • lasvgmom Feb 09, 2009

    I have the same problem. I downloaded and installed the most recent driver, but after printing it still hangs at 99%. I can cancel, but the next print job just goes in the que. If I unplug and wait 10 sec then replug in, it prints the last document only.

×

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My lexmark x1270 had the same problem on xp sp3.
I fixed the problem installing all x1270 software with xp sp2, then i installed xp sp3 and now it works good!

Posted on Sep 16, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I fixed it! I had to completely uninstall everything. Then unplug my printer and restart my computer. Uninstall anything still left regarding lexmark.
Got the new drivers and installed them. Plug in the printer and I haven't had any trouble since.

Posted on Feb 18, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I can clear the print job by restarting the computer but when I submit another print job after that, the same error (printing status 99% and hang after that) recur.

Posted on Feb 18, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Same problem. everytime i restarted my pc and deleted the printed files from control panel/printers/lexmark x5150.

Posted on Jan 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Status - deleting printing


Sometimes a job will get stuck. If rebooting does not work, right click My Computer > Manage. Go to Services and Applications > Services. Stop the Print Spooler.


This will need to be done by an IT admin if the printer is at work and on a print server. Don't forger to start Spooler.

Jan 24, 2013 | HP psc 1310 series

1 Answer

Have Z2420 printer appears it's talking with PC says it's printing gives printing status as 20% complete but nothing prints s


It could be due to the print spooler service on your computer. Please follow the steps below on how to clear the print queue and enable the print spooler service.

  1. Browse to Start -> Run... and type in NET STOP SPOOLER (this will stop the print spooler service)
  2. Browse to your windows\system32\spool\PRINTERS\ folder. You should see files there ending in .SPL and .SHD created around the time you tried to print - delete these files.
  3. Browse to Start -> Run... and type in NET START SPOOLER (this will restart the print spooler service)
Try to print a document again to verify that the problem is fixed.

Jan 15, 2012 | Lexmark Z2420 Printer

1 Answer

I replaced the cartridge of my hp psc 1401, copied the test page that was automatically printed, but now I can't print anything. Copying works OK. I don't get an error message or blinking lights on...


what is the status of print job in the queue? whether it is showing printing or no status in the windows.
if the status is printing you delete all the print jobs and switch off and on .then try print something. if no status is there in the windows then you check whether the printer is off line .try make it online by right click on the printer icon then click on the use printer online.

Aug 10, 2011 | HP PSC 1401 All-In-One Printer

1 Answer

Printer stopped working


Turn printer on and off if that doesnt work then ust restart, sometimes things get stuck in the queue.

Apr 24, 2009 | Lexmark X1150 All-In-One InkJet Printer

1 Answer

Status deleting


plz check your pc for viruse(update the anti-viruse software and disable the system restore) then uninstall your printer and reinstall your printer.Plz post your findings

Jun 22, 2008 | Lexmark X1270 All-In-One InkJet Printer

2 Answers

Check Paper size, change paper size casette LTR


It seemed to work, It began after I downloaded a document from the Russian government and translated it in Google.

May 21, 2008 | Canon Office Equipment & Supplies

1 Answer

Deleting Files from spool after they have printed


see your Spool settings, Set Print directly option and try.

Apr 09, 2008 | Lexmark X6100 Flatbed Scanner

1 Answer

Hp Photo Smart Printer 7760


When you open the printer control panel, is there a queue of documents waiting to be printed? If so, delete/cancel all documents, check to make sure it is set to use printer offline (in the file menu), and then try printing a test page.

Dec 11, 2007 | HP DeskJet F380 All-In-One Printer

2 Answers

Lexmerk Z600 Series Printer won't delete document after printing


check your allowed programs in your security suite to see if your print programs are allowed

Nov 14, 2007 | Office Equipment & Supplies

Not finding what you are looking for?
Lexmark X5150 All-In-One InkJet Printer Logo

Related Topics:

786 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Don  Farrell
Don Farrell

Level 3 Expert

1018 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...