Question about D-Link DI-604 4-Port Cable/DSL Router (DI-604) Broadband (di-604 (dont quote)) Bridge

2 Answers

Online user manual

Pls help find a friendly printer version

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 556 Answers
Re: online user manual

If you do not have adobe reader go here download and install it (button on window)
There are several different versions of this route found on several different site
Click Technical Support
Select DI-604 in model and click Search
If your model is B, D, or F go to the link
choose the manual link and whatever else you need.
Click Support
Click United States
Click Product Information
Click Here (between gray and blue bars)
Under Broadband
Under Routers
Click DI-604
Determine A,B,C,E and click appropriate picture
Product manual is on the left in the gray bar
There are considerable additional resources that may assist you there.

Posted on Dec 18, 2007

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Contributor
  • 44 Answers
Re: online user manual


Posted on Dec 18, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Default password for administrator login

usually from the factory the password is admin and the user admin ..but you may need to let them free..if it was used before and now you do not know the log-in ..just reset it using the reset button and will get to the factory settings ..My advice is to read the manual cause the password is mentioned in there is it is different ..

Nov 08, 2011 | Alvarion BreezeNET B28 EasyBRIDGE bundle...

1 Answer

I was helping a friend who has Earthlink DSL (a ZyXel DSL modem) to get her Linksys WRT160N wireless router working with the Earthlink modem. No luck. Earthlink won't help unless you pay $7.95/mo with a...

Hello mcneel,

The router should use the ZyXEL P600 as it's DHPC Server. And review/update the ZyXEL WAN configuration as follows:

• Log on to the ZyXEL P600 browser configuration interface:
• Enter username/password: Default is username:admin - password:1234
• Click '+' by Network in the letf-hand panel
• Click WAN
• In the Internet Connection tab, select the following options:
Name - (Any Name)
Mode - (Routing)
Encapsulation - PPPoE
User Name - (ISP login username eg.
Password - (ISP Login password)
Service Name - (Leave Blank)
Multiplexing - (LLC)
Virtual Circuit ID
VPI - (Leave Blank: Issued by ISP)
VCI - (Leave Blank: Issued by ISP)
IP Address
Obtain an IP Address Automatically - ([X] Check this option)
Static IP Address - (Not Selected)
IP AddressI - (Leave Blank)
Nailed-Up Connection - ([X] Check this option)
Connect on Demand Max Idle Timeout sec
• Click 'Apply' button
• Close the browser configuration interface page

Finally, this link to the EarthLink DSL FAQ Setup Installation and Configuration page might offer some useful suggestions:

If this solution is helpful please click a thumbs-up rating below.

Have a great day,

Feb 04, 2010 | Zyxel Prestige 645M (AM408405) Bridge

1 Answer

How do i set up the wireless bridge without a

You need to configure your router.
For that Connect your router to computer with ethernet cable then you can access it with following default link.
If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.
Click on WAN settings and set those settings as your internet service provider settings.
Enable DHCP if you want to get ip from router.
Clickon wireless settings enable wireless then enable WEP Security then add WEP code .It isyour password to connect wi fi.Then save settings and restart router.
Then you can connect your wi fi network with that code.
Let me know if you need further assistance.
Thanks for using FixYa.

Jan 30, 2010 | Linksys Wireless-G Music Bridge (WMB54G)

1 Answer

How can i set up a security password for my wireless access point

Are you asking how to set the login password to the router or how to turn on encryption for the wireless network so that any wireless user has to provide an authentication key when connecting to your network?

In either case, the user manual generally gives clear instructions and most companies provide those manuals online. Start here and enter your s/n at the bottom. If you turn on encryption, write your key down because you also will need to configure your pc or laptop wireless with that key to connect in the future.

Oct 05, 2009 | Linksys Network Bridges

1 Answer

DSL with Vista.

Of all the backwards things. It turns out it was just a bad cable going from my PC to the router. >.>

Nov 21, 2008 | Siemens SpeedStream 4200 (13A4200001)...

1 Answer

PC to PC connection

Question is already answered. I asked members of our local computer users group.

Sep 22, 2008 | Efficient Networks SpeedStream 5667...

1 Answer


I got ur question, try following steps and i hope it may solve your problem soon and also reply back to me if it solves the problem:

1. Hard Reset the Modem(on back side of modem or underneath you will find the small hole that says reset you need to press and hold that button as soon power light on the modem flashes release the reset button)

2. Go to control panel then go to network connection> on leftside click on create a new connection>click on next>select the first option Connect to Internet>next>select second option set up my connection manually>next>select second option connect to broadband connection that requires user name and password>next> typpe your internet user id and password and confirm the password>next>click on Finish..

3. You will get a new window with your connection name just click on connect at the bottom of that window, you will get connected OR you ill get some error if you wre not be able to connect, note the error if you get that there.

4. open internet explorer then browse the internet if you are connected....

5. If You face any problem reply back to me here with your ip address,dns server,default gateway so we can try to put manuall address on your modem.

6.Other thing that you can try is cick on start>> go to Run box>> Type>netsh dump>> click on ok>> wait for 2 minutes th reboot your computer and try to connect through connection that you would create in network connection.........

reply back to me pls........

Jun 02, 2008 | Siemens SpeedStream 4200 (13A4200001)...

1 Answer

Airmux 200

Depending on the current rev. of software you have in your Airmux, you may have to upgrade to an interim rev. before upgrading to the latest. I have successfully upgraded some of the very oldest Airmux's dating back to 2005 with the latest software (1.750 and above) by first upgrading to version 1.300 reboot the units, then version 1.500 followed by another reboot, and then finally version 1.750 followed by another reboot. The reason for the reboots in betwen version uploads is that when you load a new version of software to an Airmux, the new version is copied into temporary flash ram. When you reboot, the Airmux sees a new (valid) version of software and will load it. Hope this solves your problem. Incidentally, you can get the software from RAD tech support.

Jan 31, 2008 | RAD Data Communications RAD RIC E3/ETH...

1 Answer

Printer connection

Hi jatsen,

Please kindly specify what is the brand/model of your printer? Majority of printer it is being installed or connected with the following ports. USB, parallel  ports.

But you need to install the driver if doesn't support by your operating system.

Hope this will be helpful to you.

Best Regards,


Oct 24, 2007 | Network Bridges

1 Answer

Setting up a static IP

Hi kellysdad,

Setting up static IP is what we called manually IP or not generated by DHCP. Maybe you where putting the same IP between your bridge and your network TCP/IP properties.

Try to removed your network devices from hardware control panel and installed it again..

Hope this will be helpful to you.

Best Regards,


Oct 23, 2007 | Siemens SpeedStream 4200 (13A4200001)...

Not finding what you are looking for?

Open Questions:

See all D-Link DI-604 4-Port Cable/DSL Router (DI-604) Questions

D-Link DI-604 4-Port Cable/DSL Router (DI-604) Broadband (di-604 (dont quote)) Bridge Logo

Related Topics:

407 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Network Bridges Experts

john smith

Level 2 Expert

366 Answers


Level 3 Expert

7983 Answers

Shawn DuRee

Level 3 Expert

353 Answers

Are you a D-Link Network Bridge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides