Question about HP Deskjet F4210 All-In-One InkJet Printer

1 Answer

The printer is off line and I can not get it back on line, I disconnected the cables for 5 minutes and then reconnected them, however, the printer is still off line.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 53 Answers

If you are using Windows XP Operating System, perform the steps below:
1. Click Start --> Printers and Fax.
2. Right click the printer icon and check the following:
a. Check whether the All-in-One is set as default printer.
b. Ensure that the there is a check mark on the "Use printer online". If you have the Use printer offline, make it online by selecting the option.
c. Ensure that there is no check mark on the Pause printing.

Posted on Oct 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Show error


E indicates an Error condition.

1.Without turning off the product, disconnect the USB cable from the rear of the product.

NOTE:The USB cable connects to the port on the rear of the product. The port is labeled with the USB icon ( ). If your printer has a network or wireless connection, ignore this step.

Figure 1: Example USB connection (your product might not look exactly the same as this example)


2.Remove the cartridges from the product.

3.Wait until a message to insert the cartridges displays. If you do not see a message within a few minutes, skip to the next step.

NOTE:If your printer does not have a display, wait until the cartridge lights blink. If the cartridge lights do not blink within a few minutes, skip to the next step.

4.Disconnect the power cord from the back of the product.

5.Wait 60 seconds.

6.Reconnect the power cord. If the product does not automatically turn on, press the Power button ( ).

7.Reinsert the cartridges, and then close any open doors on the product.

8.If you receive a prompt to print a calibration page, do so.

9.If you disconnected the USB cable, reconnect it to the rear of the product.

10. Try printing again.


1.Without turning off the product, disconnect the USB cable from the rear of the product.

NOTE:The USB cable connects to the port on the rear of the product. The port is labeled with the USB icon ( ). If your printer has a network or wireless connection, ignore this step.

Figure 1: Example USB connection (your product might not look exactly the same as this example)


2.Remove the cartridges from the product.

3.Wait until a message to insert the cartridges displays. If you do not see a message within a few minutes, skip to the next step.

NOTE:If your printer does not have a display, wait until the cartridge lights blink. If the cartridge lights do not blink within a few minutes, skip to the next step.

4.Disconnect the power cord from the back of the product.

5.Wait 60 seconds.

6.Reconnect the power cord. If the product does not automatically turn on, press the Power button ( ).

7.Reinsert the cartridges, and then close any open doors on the product.

8.If you receive a prompt to print a calibration page, do so.

9.If you disconnected the USB cable, reconnect it to the rear of the product.

10. Try printing again.



If that doesn't work you can log on to HP.com/Support and Drivers.
Find your device and search the error codes listed.
You can also download a real good Utility, HP Print and Scan Doctor.

Apr 27, 2012 | HP DeskJet F380 All-In-One Printer

6 Answers

Memory light flashes


Can i know the model and brand of printer?

In general, You please check your mannual for wat that blink light means and troubleshoot. If you dont have mannual, you can goto the support page of your product in their company website and download mannual or check the troubleshoot options for your problem.

Sep 09, 2008 | Canon PIXMA MP780 All-In-One InkJet...

1 Answer

I have an HP Photosmart C4795 printer. I am getting an error "cartridge error:. I have tried changing to new original HP ink cartridge and loading and unloading cartridge several times. I can not...


Welcome to FixYa!

Try to reset the printer by doing the following;

1. Turn ON the printer.
2. Disconnect the USB printer cable at the back of your printer while the printer is ON.
3. Remove the cartridge.
4. Wait for the "Insert Cartridges" message to display on the message screen of the printer.
(You can skip this if your printer does not have this feature.)
5. Disconnect the power cord from the back of the printer.
6. Wait for 1 minute.
7. Reconnect the power cord.
8. If the printer does not turn on, use the power button to turn it on.
9. Reinsert the cartridges.
10. If the printer prompts you to print a calibration page or requests for a cartridge alignment, please do so.
11. Reconnect back the USB printer cable and try to print.

I hope that this would be helpful to you, thank you for usng FixYa!
Jas247

Mar 07, 2011 | HP Photosmart D5145 Printer

1 Answer

I "m getting error 252*


Welcome to FixYa!

Try to reset the printer by doing the following;

1. Turn ON the printer.
2. Disconnect the USB printer cable at the back of your printer while the printer is ON.
The USB printer cable looks like the image below.

jas247_9.jpg

3. Open the Cartridge Door and remove the cartridge. Refer to the image below.
jas247_11.jpg
.
4. Wait for the "Insert Cartridges" message to display on the message screen of the printer.
5. Disconnect the power cord from the back of the printer.
6. Wait for 1 minute.
7. Reconnect the power cord.
8. If the printer does not turn on, use the power button to turn it on.
9. Reinsert the cartridges.
10. If the printer prompts you to print a calibration page or requests for a cartridge alignment, please do so.
11. Reconnect back the USB printer cable and try to print.

I hope that this would be helpful to you, thank you for usng FixYa!
Jas247

Mar 06, 2011 | HP Photosmart Premium C309A All-In-One...

1 Answer

MACHINE SNATCHES PAPER AT BOTTOM RIGHT CORNER WHEN PRINTING OR COPYING AND DOES NOT FEED


A hard reset of the printer may clear the error. Here is how to perform the hard reset:
1.Shut down the computer.
2.Open the top cover of the printer and remove the print cartridges.
3.Close the top cover of the printer.
4.Press the power button on the printer to turn the printer off.
5.Disconnect the communications, (USB or Parallel), cable from the back of the printer.
6.Disconnect the power cord from the back of the printer for one minute.
7.Reconnect the communications cable to the printer.
8.Reconnect the power cable to the printer.
9.Press the printer power button to turn the printer on.
10.Open the top cover and reinsert the print cartridges.
11.Close the top cover and print the calibration page.
12.Restart the computer.

Let me know if you need more help

Mar 04, 2011 | Canon PIXMA MP190 All-In-One InkJet...

1 Answer

Printer won't start


1. completely unplug power cord from wall socket,
2. unplug power cord from printer
3. unplug printer cable completely from computer
4. unplug printer cable completely from printer.
5. let printer stay disconnected for approx 1 minute
Now securely:
1. reconnect the printer cable to the printer.
2. reconnect the printer cable to the computer
3. reconnect the power cord to the printer
4. reconnect the power cord to the wall socket

turn printer on

You may find that a connection has simply worked itself loose over time.

Mar 29, 2010 | Canon PIXMA iP3000 InkJet Photo Printer

1 Answer

What do we do when Canon MX330 code comes up besides shutting off the printer and putting it back on?


Turn off your computer and completely shut down.
Turn off your printer.
Disconnect all cables and electrical cords from your printer.
Make sure the electrical cord is also removed from the wall.
Wait 5 minutes and reconnect the power cord to the printer.
Then connect the printer cable from the computer to the printer.
Turn on your printer
Now reboot your computer (cold boot)
Your printer should now clear itself.

Mar 23, 2010 | Canon PIXMA MX330 Multifunction InkJet...

1 Answer

The In Use / Memory light is flashing but there is no tel line in use or nothing in memory. Any suggestions how to stop it flashing?


Turn off your computer and completely shut down.
Turn off your printer.
Disconnect all cables and electrical cords from your printer.
Make sure the electrical cord is also removed from the wall.
Wait 5 minutes and reconnect the power cord to the printer.
Then connect the printer cable from the computer to the printer.
Turn on your printer
Now reboot your computer (cold boot)
Your printer should now clear itself.

Mar 07, 2010 | Canon PIXMA MX700 All-In-One InkJet...

1 Answer

Printer cycles on/off and displays "improper shut down"


Got the same problem following a message "Printer ink failure" code 0xc19a0035. Instructions say to shut down using button on/off. But printer refused to shutdown. After 30 minutes, I disconnected power cable. Removed cartridges. Reloaded cartridges. Reconnected power cable and got "Improper shutdown" message with continuous cycle. Solution: 1. While the printer is still turned on, unplug all cables and cords at the back of the printer.
2. Unplug the power cord also from the wall outlet...
3. Wait for two minutes.
4. Reconnect power cord to the wall outlet first.
5. Press and hold the pound (#) and six (6) buttons.
6. While holding down the two buttons, reconnect the power cord to the back of the printer and after two seconds, release pound and six buttons.
7. Turn on the printer if it turns off... and it's fixed.

Aug 25, 2009 | HP Photosmart C6100 All-In-One Printer

1 Answer

PRINTERS


Please perform the folllowing steps:


1. Disconnect the Universal Serial Bus (USB) cable from the back of the product, but leave the product turned on.
2. Open the cover of the product and remove the print cartridges.
3. Close the cover and wait for the Insert Ink Cartridges message to display.
4. Disconnect the power cord from the back of the product and the wall socket, then wait for one minute.
5. Reconnect the power cord. If the product does not automatically turn on, press the Power button.
6. Open the cover and reinsert the print cartridges.
7. Close the cover. If prompted, print a calibration page.
8. Print a Self Test to verify product is functional.
9. Reconnect the USB cable, and try to print from the computer.
If the error is still there replace the unit


Regards,

Sagarjd

Jul 26, 2008 | HP Photosmart C6180 All-In-One InkJet...

Not finding what you are looking for?
HP Deskjet F4210 All-In-One InkJet Printer Logo

Related Topics:

254 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...