Question about NRS Hoveround MPV 5 - Used Power Wheelchair

1 Answer

The top row of lights are flashing but no other lights are on. I got it wet the other day but it is dry inside and out. Is there a reset on the mpv 5

Posted by on

  • Donna Angelo
    Donna Angelo Oct 05, 2010

    How many lights are flashing? You may want to have the power chair sit for several days to make sure the electrionics inside the controller are fully dry. You can try to reset the brakes by lowering and then raising the brake levers located on front of the footrest.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 232 Answers

How many lights are flashing? You may want to have the power chair sit for several days to make sure the electrionics inside the controller are fully dry. You can try to reset the brakes by lowering and then raising the brake levers located on front of the footrest. If this does not work, the controller is probably fried and will need to be replaced; $1159.00 plus labor.

Posted on Oct 21, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What to I do if my TV got wet on the power cord but I am getting picture and sound before it cuts off?


If the liquid got into the TV and onto the printed circuit board, there could be damage to the circuit board. The fact that the TV had a reaction to the liquid is not a good thing. If the TV is still wet inside the problem will remain. If you continue to turn the TV on if it is still wet you might cause more damage. I would wait until the liquid is gone or dry and try the TV again. If the TV was in the normal position to watch, the liquid should run off and dry in a few days.

Aug 20, 2015 | Samsung Televison & Video

Tip

What to do to get your Whirlpool dishwasher to start when the light keeps...


<span>Hello,<br /><br />To reset the dishwasher push in this order the,<br /><br />HIGH TEMP WASH- HEATED DRY- HIGH TEMP WASH- HEATED DRY - CANCEL/OFF<br /><br />the control will be reset...but more importantly how many times in a row does the light flash..it will indicate what error code its displaying??<br /><br />example if it flashes 4 times then a pause then flashes 4 times again its displaying the error code#4<br />7 flashes then pause then 7 flashes its displaying the error code#7 ect ect<br /><br /><br /><br />GENE</span>

on Sep 06, 2011 | Dishwashers

2 Answers

Leaves clothes too wet after spinning


you might need to set the dryer dial to more dry and not less dry that helps the clothes to dry faster

Apr 28, 2015 | Washing Machines

1 Answer

Wet Floor at Third Seat


your ac drain is blocked

Jan 17, 2013 | 2008 Ford Expedition

1 Answer

The operator of the chair ran over an extention cord and it wrapped around the wheel. The lights on the top row all flash and the other lights don't come on, except for a second when you first push...


Check the freewheel levers in the front of the chair to make sure both are in the drive mode. If they are in drive mode and you are still getting the error then there was damage done to the brake on the motor that the cord got wrapped around and it will have to be replaced Sorry Hope this helps

Jun 06, 2011 | NRS Hoveround MPV 5 - Used Power...

1 Answer

The mpv 5 is in low gear how do you change it to high gear


The second row of lights in the speed indicator. The two bottom buttons will increase and decrease the speed. The lower left button will decrease, the lower right will increase. You will see the second row of lights get bigger or smaller as you press those buttons to increase/decrease your speed. When the second row of lights is fully lit, you will be at the top speed.

Jun 24, 2010 | NRS Hoveround MPV 5 - Used Power...

2 Answers

My son turned our refrigerator up to setting 5. When i discovered it, i turned it down to setting 3. For the past three weeks, my refrigerator has been sopping wet inside. What do I do?


dry up any water inside the unit and then unplug for about 3 seconds and plug back in, this will reset the unit into a normal cooling cycle

Oct 03, 2009 | Refrigerators

4 Answers

I have a Starter Brand Watch that did not come with a manual. I can't seem to get the chime to stop chiming on the hour.


Just bought a STARTER Sport Watch Model# STW14 @Walmart

TO CHANGE TIME:
1. Press and release MODE button quickly 3X in a row(top middle no.(Seconds will flash)& change Seconds by pressing START button 2. Press & release RESET button 1X quickly(Minutes will flash) & you change Minutes by pressing START button 3.Press & release RESET button 1X quickly(Hour will flash) & you change Hour by pressing START button. 4.Press & release RESET button 1X quickly(Date will flash) & you change Date by pressing START button.5.Press & release RESET button 1X quickly(Month will flash) & you change Month by pressing START button 6. Press & release RESET button 1X quickly(Day of week will flash) & you change Day by pressing START button 7. Press & release MODE button 1X quickly to return to Normal use
TO SET ALARM: 1. Press and release MODE button quickly 2X in a row(Hour will flash)& you change Hour by pressing START button 2.Press and release RESET button quickly 1X (Minutes will flash)& you change Minute by pressing START button 3. Press & release MODE button 1X quickly to return to Normal use
TO VIEW MONTH & DAY: 1. Press & Hold START button 2.Just Release START button to return to normal use.
TO USE STOP WATCH: 1. Press and Release MODE button quickly 1X 2. To START stop watch: Press START 1X quickly 3. To STOP Stop watch: Press Reset button 1X quickly 4. To RESET Stop watch: Press & Hold START button and press RESET button quickly @ the same time, 2X in a row 5.Press & Release MODE button 1X quickly to return to Normal use

Sep 12, 2009 | Bulova Watch

1 Answer

Water damaged DS lite


It may need a new Battery or the inside may still be wet. Try the battery first-- ya can get them online and while you wait on the battery let the DS continue to dry out

Feb 27, 2009 | Nintendo DS Console

1 Answer

Hotpoint bf1620 dishwasher flashing light fault


Hi ,When this happens I keep the button with the letter "P" Pressed until the fault lifgt resets,my row of buttons is inside the top edge of the unit.

Sep 01, 2008 | Hotpoint 23 in. BF50 Built-in Dishwasher

Not finding what you are looking for?
NRS Hoveround MPV 5 - Used Power Wheelchair Logo

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top NRS Health & Beauty Experts

Colin Taylor

Level 2 Expert

346 Answers

wcdoc1953
wcdoc1953

Level 2 Expert

280 Answers

Brad Brown

Level 3 Expert

16043 Answers

Are you a NRS Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...