Question about Kodak ESP 5 Printer

4 Answers

Kodak esp7 wont print black



My kodak esp 7 wont print black and seems to be leaking.Any ideas to resolve this problem.Would be very grateful.Thank you.

Posted by on

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 295 Answers

Click on menu on the printer,scroll down and choose clean printhead or go to maintenance and then click on clean printhead .After that try to print. If issue persists,call kodak @ 1800 421 6699 and they will replace the printhead for you free of cost.Printhead is the part which holds the cartridges and has 4000 nozzles which sucks ink from cartridges.It Might have gone bad

Posted on Oct 10, 2009

  • Nancy Abraham Oct 13, 2013

    I called and was told the cost for a new print head was $29.99

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Kodak ESP 7 All-in-One Printer sounds like it is going through the printing process but not printing image on paper. My ink cartridges are full. could my print head be bad??

Posted on Apr 06, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 68 Answers

Hi,

please stop printing anything and calls kodak directly for a new printhead. This will solve the issue :)

Posted on Oct 04, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 151 Answers

For that problem kindly try doing the ff:

* Re-seat the inks both color and black then try printing
* Re-seat the Printhead of the printer then print again
* if problem still persist call 1800 421 6699 and the technical rep will replace the printhead

Hope this will help

Thanks
Byron

Posted on Sep 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is their anything else I can do to fix the problem?


Go to settings, reset the type of picture and text to be printed. If this doesnt work you can now get a new printer for a great price on Amazon these days.

Jun 12, 2017 | Kodak ESP C315 All-in-One Printer

1 Answer

Www kodak com go support


I have 2kodak printers one esp7 the other esp 9250 neither of them is printing well one not at all . All I get is blank paper have you any ideas what could be wrong . I have installed new inks in both but still no results. I am about to throw them both out but I thought I might ask for help first.

Jan 02, 2014 | Cameras

1 Answer

Kodak esp 7 all-in-one printer. I have just replaced the color ink cartridge. The machine keeps telling me to reinstall the printhead and ink cartridges. I have done this over 5 times. It still will not...


I have had the same issue - only bought my ESP7 last month - have been on the chat support with Kodak in US and they advise that the print head will need replacing but they couldnt send one from US and advised me to ring the 0870 Kodak support number in UK - this is a premium line and lucky I took out an instant replacement policy when I bought it so I am off to PC world to get another! Good luck with yours - suggest you phone Kodak and ask for a print head replacement which should be free if you have had the printer less than 12 months - make sure you have the serial number of the printer with you when you phone. Good luck!

May 21, 2010 | Office Equipment & Supplies

1 Answer

-Tried to scan and got error kodak lexicon executor has stopped working and when clicked cancel got error 2005. wireless esp7 ideas ?


The issue is with the new Home center 4.2 version.It is a very complicated issue and requires some difficult steps.I would request you to call Kodak @ 1800 421 6699 and try to ask for a supervisor straightaway.

Dec 18, 2009 | Kodak ESP 5 Printer

1 Answer

MY KODAK ESP 5 WILL ONLY USE THE COLOR CARTIRDGE


take out both cartridges from ur printer,install them again. ry to print again.kodak printers works on the mechanism that even if ur printing black and white documents, it will take ink out of colour cartridge as well . try to upgrade the firmware of ur printer by going to www.kodak.com/go/downloads and downloading latest firmware from there on ur desktop,connect ur printer to computer and run that file. restart ur printer,ur issue will be resolved.

Aug 22, 2009 | Kodak 5300 All-in-One InkJet Printer

1 Answer

Kodak ESP9 and ESP7 are junk


hello im sorry for inconvenience that u have to face with the printer. im using ESP-7 for past 1 year and my unit is working fine. i have recently bought four esp-5 for my office 3 months back.i never had any problem. in case i have problem,i call up the people.though they are in INDIA, they are very supportive and co-operative. although my printheads for printers have been replaced,but the printers works beautifully and high performance is guaranteed as i keep upgrading the firmware of printer. kodak is the best. call kodak may be they will replace printer for you.

Aug 22, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Solid black line when scanning or copying from KODAK ESP-3


Get a damp soft cloth and clean the scanner glass. If that doesn't resolve the issue there is a chance the scanning unit itself is damaged.
Let me know.
Cheers, Chris

Jun 21, 2009 | Kodak ESP 3 Multifunction Printer/ Copier/...

1 Answer

ESP7 will not print my yellows.


call kodak @ 1800 421 6699 and they will replace the printhead for you free of cost. Replacing the Printhead will solve the issue.

Jun 18, 2009 | Kodak ESP 5 Printer

1 Answer

Kodak esp 5 black ink not printing, have tied everything I can


Time to call kodak @ 1800 421 6699 and they will replace the printhead for you free of cost. Do not worry, it will resolve the issue and the printheads of kodak have been lasting longer nowadays as the technology has been improved.All the best.

Jun 02, 2009 | Kodak ESP 5 Printer

Not finding what you are looking for?
Kodak ESP 5 Printer Logo

4,687 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Cindy Wells

Level 3 Expert

5099 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...