Question about Wisecom WS 5614PSL (WS-5614PSL) Modem

Open Question

Speaker problem I am using a NOKLA U 8800. It has a cect code mt6227 that shows on the screen of the computer when connected through it's ubs early morning,I reciaved a call,it rang about 2 times and started to vibrate.and since then the ring tone speaker has stopped working uptill date.I tried to return it to factory setting,but that did not profer any solution. I am afraid of giving it to roadside technicians.Is there any correction code that i can use to correct this problem ?if not,what do I do? please help me out of this problem because i have been misssing some of my important calls.Please if it is possible do notify me through my email address. nb:i do not have any problem with making or answering calls.the problem is only to ring out.

Posted by on

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

On my WIndows 7 computer it shows that my wireless is connected, but it also says, "Unidentified Network, no internet access" and I can't get on

Click on the network icon (five vertical bars, next to the speaker icon, bottom right of screen). When network window opens, click on name of network. If a blank box opens with a message asking for the network key, enter the security code that you entered after the WEP setting on initial installation.

If this doesn't work then I suggest that you re set the modem to factory default and go through the initial set up again, choosing a new name for the network.

Nov 22, 2012 | Modems

1 Answer

I have a computer, a all-in-one printer, a phone line, and a cable modem. how do i make this work? there is no phone jack in the modem.

Okay... Let's see if I can help you out.

Yes, your cable modem should have a phone jack on it. Are you sure it's a modem and not a router? Do you have phone service through your cable company? If so, your modem should be phone ready. Just checking..... :-)

The first thing you want to do is get your computer completely set up and ready to run (do not turn on yet). Just make sure all components are plugged in. Everything should be color coded and different sizes & shapes making it virtually impossible to cross anything accidentally. Your mouse and keyboard should be the only two components having the same kind of connection but they are color coded on the connectors and behind the computer too. No worries!!! :-)

Next, get your modem hooked up. Plug in power cord and attach cable wire into the back of the modem. Next you'll need an Ethernet wire to go from the back of your modem to your computer. If you're not familliar with ethernet - it looks like a phone cord only bigger.

Next get your printer wires hooked up to your computer as per directions for your specific unit. Should be fairly simple.

Once you have everything connected, power up your modem. Once it's finished booting up, turn on your computer. Once your computer is completely finished booting up, Turn on your all-in-one. Your computer should now be showing...Found New Hardware. Follow on screen prompts.

I hope this info was helpful to you. If you do need further assistance don't hesitate to ask. If needed, I'll give you my # so I can walk you through it over the phone.

Good Luck!

Jan 29, 2010 | Telebit Refurbished OPEN BOX EXTERNAL...

1 Answer

Unable to set up wireless router

Shut down your computer, unplug the cable modem and the switch. Connect all three - computer to switch, switch to modem. Make sure that the ethernet cable between the router and the modem is in the router uplink port and that the computer is plugged into one of the four ports that look alike. Wait 30 seconds - plug in the modem. Wait another 30 seconds, plug in the router, wait another 30 seconds and boot the computer. Open a browser and see if you have internet access. If you still don't, then try to check the browser by typing into the address bar of the browser. That should give you the browser sign in screen. The Linksys default is to leave the user name blank and type admin for the password. That should give you access to the router so you can check the settings. If this doesn't work, document carefully what happens and post again with your results and we'll try to go from there.

Jun 08, 2009 | Arris Touchstone 450a (CM450) Modem

2 Answers

How To: USB hookup for computer while having ethernet hookup to Xbox 360.

USB to PC is fine, make sure you have the original installation disk for it. Then you can connect the Xbox via network cable. There shouldn't be any problem as your modem can take 2 connections by the sound of it.

May 21, 2009 | Westell Wirespeed LiteLine 6100...

1 Answer

I can not connect my mt6227 to my pc.Wat can i do to connect it?


what's the complete brand of your modem???...and you need to have an ethernet cable to connect your modem to your pc and your pc should have an ethernet adapter,too... then you can connect already your pc to your modem....and of course if you have just connected it just now, you need to configure the interface of your modem so that it would connect you online,okay...

Dec 28, 2008 | Modems

1 Answer

Westell 6100

You cannot use the UBS and ethernet conenction of your modem at the same time, so it only means that you can only use either the UBS or the ethernet connection of your modem and since you want to use to computer and get online at the same time you need to have a router to share the internet connections on 2 computers at the same time, you can get this router BEFSR41 or WRT54G...

Oct 20, 2008 | Modems

1 Answer

Driver for mt6227

Welcome to FIXYA

you can always try to downlaod it from if not there then try

i hope this helps out have a good day

Jul 03, 2008 | Modems

1 Answer

MT6227 problem

there is a driver/software attached to your mobile phone at the point of purchase, install it to the computer and use it for the download,otherwise your computer might not detect the present of your mobile phone

Apr 23, 2008 | Modems

2 Answers

Mt6227 modem driver


I am presuming that you are referring to the built-in modem of China made mobile phone such as a Kaiqi.
You can download drivers and pc synchronisation software here :
Drivers for MT6227:
MoDem Drivers for MT6227 :
PC Sync Manager :
password - ""

Alternately, you need to install the USB drivers supposedly saved in the phone memory when shipped from the factory. Likewise saved is a copy of PhoneSuite which must be copied/installed in your PC. This solution was actually posted elsewhere here in FixYa by monir.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Feb 18, 2008 | Lamaqq 56k v.90 SGS External USB Data/Fax...

5 Answers

Driver for Kaiqi MT6227 phone modem

hi guys, for MT6227 just dl from this site you won't be regret. I've already used for MyG chinese phone, it's WORK !

Oct 11, 2007 | Modems

Not finding what you are looking for?
Wisecom WS 5614PSL (WS-5614PSL) Modem Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Wisecom Modems Experts


Level 3 Expert

18258 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

56724 Answers

Are you a Wisecom Modem Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides