Question about HP LaserJet 4350n Printer

Open Question

59.40 error Have tried restting computer, unplugged, as soon as turn on get this error.

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why, when I attempted to print a Word document, did I receive the following message: "Printing cannot be executed because an error is occuring in the printer. Check the printer and clear the error." I have...


Hello
The first thing I tend to do with any fault on a computer or related hardware, is to turn it off, unplug it from the power supply, turn off and unplug the rest of the system components. Wait for a few minutes, plug the equipment back in and turn all components on and then reboot the computer.
If you have already done all this then I suspect that you will need to find out more about the error. You can download various manuals for your machine from here:-
Canon PIXMA MX860
This may give you some idea of the more common errors and how to fix them. If this doesn't work then the ultimate thing to do is to remove the printer and its drivers from the computer and reload the drivers from the disks supplied with the printer.
Hope this is helpful, if so would you please register that with Fixya
Cheers

Feb 27, 2015 | Canon PIXMA MX860 All-In-One InkJet...

1 Answer

Error sc 565 mp c2030


Hi
The first thing I tend to do with any fault on a computer or related hardware, is to turn it off, unplug it from the power supply, turn off and unplug the rest of the system components. Wait for a few minutes, plug the equipment back in and turn all components on and then reboot the computer. After this I start to look elsewhere for fault diagnosis and repair.
In your case I found a list of codes for your machine here:
Error Codes Ricoh Aficio MPC2030
Here you can view the specific codes by using the drop down menu in the middle of the page. You can also change the make & model of machine by using the drop down menus near the top of the page. Also you can download a pdf format Service Manual for the machine by using the link just above the error table.
Hope this is helpful, if so would you please register that with Fixya
Cheers

Dec 31, 2014 | Ricoh Office Equipment & Supplies

1 Answer

My Sears Limited Edition washer starts the drain pump as soon as you turn it on and the pump keeps running continuously(I can hear it) which doesn't allow the water to fill the tub?As soon as it start


check the drain hose,if it's pushed down the stand pipe to far it will cause a syphoning affect and drain the water out as fast as it goes in,also have you unplugged the washer to reset the computer board?if not unplug it for 5 to 10 minutes,plug it back in and see if it resets itself,any error codes coming up?let me know how you make out.

Dec 14, 2014 | Washing Machines

1 Answer

Need to access the menu


Know what the ->enter BIOS Setup key is?

It's on the bottom of the computer manufacturer logo screen.

Got it?

Now press the CTRL and ALT and DELete keys at the same time.
Restarts the computer.

JUST AS SOON AS IT STARTS, start tapping on the enter BIOS Setup key.
Tap in 2 seconds intervals.

If you hear beeps ignore it. These are Stuck Key Error Code beeps, and it is you that is making them.

Still No?
Turn the computer off by holding the Power On button in, for 10 seconds.
WAIT 20 seconds, then press the Power On button.

AS SOON AS YOU PRESS the Power On button, start tapping on the enter BIOS Setup key. The rest is above.

Regards,
joecoolsvette

[The time period to enter BIOS Setup goes by F-A-S-T!
As soon as you see the computer manufacturer 'splash screen', (Logo screen), it may be TOO late. The above method makes sure you get in BIOS Setup ]

Nov 21, 2012 | Computers & Internet

1 Answer

STOP:c00002la {fatal system error}


try this, turn off the computer completely. as soon as you turn on again the computer you will be able to see a screen that shows you the DELL logo, at that screen immediately tap the " F8 " key continuously. if that is successful you should be in the windows advance menu option. use the arrow keys in your keyboard to choose the option of " last know good configuration " and hit enter.

if this doesnt work, try to reinstall the whole operating system including all the drivers. you need to have the operating system cd and the drivers and utilities cd that came with the computer.

but if you are using windows xp then just try this one.
- turn off the computer and let it rest for 10 - 20 secs
- turn on the computer and as soon as you see the dell screen that will flash in your monitor immediately press and hold the " CTRL " key in your keyboard and tap the " F11 " key continuously, if that is successful you will see the dell image factory restore by symantec, choose restore. after that just follow the directions.

(note: if you have files or datas that are important to you then all those files will be lost.)

i hope this helps.

Feb 20, 2010 | Dell Dimension 2400 PC Desktop

1 Answer

I have just installed the scanner and software, however, when i try yto scan an error message comes up saying 'the action cannot be completed because the other program is busy. Choose switch to to activate...


Hi,

Might as well try to power cycle the device meaning disconnect it from the computer , turn off the scanner , unplugged the adapter from the power source and then push on the power button for 5sec so that excess power will be drain and then restart the computer also as soon as your computer boots up connect the scanner .

ERNZ

Feb 03, 2010 | Fujitsu fi-5120C

1 Answer

What does error code 6P mean on an Amana washer model LW9203W2B


SH: Open thermistor. Unplug appliance and let rest for 15-30 minutes, then plug back in. If code continues, unplug appliance and call for service.

bP: Pressure switch error sensed. Washer will not operate when this error is displayed. Check for pinches or kinks in the water inlet hoses and straighten if necessary. Check the water inlet hoses filter screens and clean if needed. Verify that the water supply is turned on. Unplug washer and let rest for 15-30 minutes, then plug back in. If code continues, call for service.

rP: Water supply problem in spin cycle. Check for pinches or kinks in the water inlet hoses and straighten if necessary. Check the water inlet hoses filter screens and clean if needed. Verify that the water supply is turned on. Unplug washer and let rest for 15-30 minutes, then plug back in. If code continues, call for service.

LO: Lock Out mode. To activate, press START and STOP/OFF pads at the same time. To deactivate, repeat the procedure.

AU: Flashes when a factory preset cycle is put on hold. A normal function.

Clean Filter: Flashes when a cycle is selected as a reminder to clean the filter before starting a cycle for optimum drying results. Code clears when the door is closed and the START pad is pressed.

Dec 29, 2009 | Amana Washing Machines

1 Answer

Fatal error when trying to open software


crisis when a prog sound like it folder !
bad image error..
soln: rename folder / program if possible..

other one is to reinstall whole .net suite & the rest

Oct 27, 2008 | HP Photosmart 3210 All-In-One InkJet...

1 Answer

I560s Won't Print -- operator error -- can't fix


This sounds familiar; try holding the rest button for an extended time.
May not work but won't hurt anything either.

May 28, 2008 | Canon PIXMA iP4300 InkJet Photo Printer

Not finding what you are looking for?
HP LaserJet 4350n Printer Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...