Question about DXG Technology DXG-305V Digital Camera

Open Question

MY led display does not come on. The light shows yellow...and does not shut off!

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why blinking yellow light and green light infront of cpu


Check if the signal cable for the display is connected and whether there is any kink that may break a wire inside the cable. If the circuit for display inside the computer is broken, most of the time you would hear beeping when turning on the computer.

Aug 02, 2014 | Acer Veriton Computers & Internet

3 Answers

Saeco Philips coffee machine display screen doesn't light up? I can still use it and I can see the options but with no colours.


Saeco Philips coffee machine display screen doesn't light up?

I can still use it and I can barely see the options but display screen doesn't light up

I'm having it sent back for repairs, is there a quick fix for this issue so I do not have to send it back

Apr 11, 2013 | Saeco Intelia Focus Automatic Espresso...

1 Answer

I have a herritage t101, it displays the Ls error and has no drive whatsoever but was working a few month back


The SCR lower board is designed with diagnostic LED lights. The LED's are color coded according to
their specific function. Green indicates a properly operating treadmill; the green lights should always
be ON when power is supplied to the treadmill. Yellow indicates a treadmill function. Red indicates a
treadmill malfunction. Here is a list of each LED and what it signifies:
MOTOR (yellow) - The MOTOR LED illuminates when dc (direct current) voltage is sent to the drive
motor. The LED gets brighter when the dc output is increased.
RLC (yellow) - The RLC (R = Reactance / L = Inductance / C = Capacitance) LED illuminates when
the filtering system is properly working. The filtering system includes the capacitor and filter choke. If
there is a short in either component then the RLC light will not come on.
DN & UP (yellow) - The DN and UP LED lights tell us if the elevation DN and UP relays are
functioning properly. When the LED lights, it tells us that the relay has energized and is sending high
voltage (110vac or 220vac) to the elevation motor.
AC PWR (green) - The AC PWR (Alternating Current Power) illuminates when AC line voltage is
delivered to the treadmill. It then passes through the in-line fuse (110)/s(220) and lights the AC PWR
LED.
+12V (green) - When the proper AC voltage is delivered to the treadmill, passes through the in-line
fuse/s, through the full wave bridge rectifier (changes AC to DC), through the transformer (steps down
DC to +12vdc) then the +12V LED lights.
This the board LED, who control the signal for Main Motor+Elevation Motor. You must see, the LED DN+ UP( both will be Lit) in any position down or Up.
2) The RELAY board is designed with diagnostic LED lights. The LED's are color coded according to
their specific function. Green indicates a properly operating treadmill; the green lights should always
be ON when power is supplied to the treadmill. Yellow indicates a treadmill function. Red indicates a
treadmill malfunction. Here is a list of each LED and what it signifies:
AC PWR (green) - The AC PWR (Alternating Current Power) illuminates when AC line voltage is
delivered to the treadmill. It then passes through the in-line fuse (110)/s(220) and lights the AC PWR
LED.
VDC (green) - The VDC LED will light when it receives DC voltage from the DC power supply.
DN & UP (yellow) - The DN and UP LED lights tell us if the elevation DN and UP relays are
functioning properly. When the LED lights, it tells us that the relay has energized and is sending high
voltage (110vac or 220vac) to the elevation motor.
UPSW (green) - This LED will illuminate when the low voltage dc is delivered from the upper display
board to the elevation UP relay. This low voltage dc is what energizes the coil of the relay.
DNSW (green) - This LED will illuminate when the low voltage dc is delivered from the upper display
board to the elevation DOWN relay. This low voltage dc is what energizes the coil of the relay.
BELTSW (green) - This LED will illuminate when the low voltage dc is delivered from the upper
display board to the belt (motor start) relay. This low voltage dc is what energizes the coil of the relay.
SPD (yellow) - The SPD LED flashes on and off (relative to speed) when the speed sensor is
operating properly.
PWM (yellow) - This LED will light when the upper board is sending a speed signal to the PWM.
Both the PWM LED and BELTSW LED must be lit for belt movement.
Finally this this Relay Board, the Each Led will be Lit, for any Relai control for DN down, or UP elevation motor. Use the contact cleaner, you can find it in R .Shack.
see the diagram attached.
God bless you1_14_2013_9_25_21_pm.png

Jan 14, 2013 | Exercise & Fitness

1 Answer

My new visions t9550 treadmill will not calibrate. it completes the speed calibration but treadmill will not elivate therefor fails calibration. what do i do?


Step 1:

follow this steps for troubleshooting and fix it. God bless you

The SCR lower board is designed with diagnostic LED lights. The LED's are color coded according to

their specific function. Green indicates a properly operating treadmill; the green lights should always

be ON when power is supplied to the treadmill. Yellow indicates a treadmill function. Red indicates a

treadmill malfunction. Here is a list of each LED and what it signifies:

MOTOR (yellow) - The MOTOR LED illuminates when dc (direct current) voltage is sent to the drive

motor. The LED gets brighter when the dc output is increased.

RLC (yellow) - The RLC (R = Reactance / L = Inductance / C = Capacitance) LED illuminates when

the filtering system is properly working. The filtering system includes the capacitor and filter choke. If

there is a short in either component then the RLC light will not come on.

DN & UP (yellow) - The DN and UP LED lights tell us if the elevation DN and UP relays are

functioning properly. When the LED lights, it tells us that the relay has energized and is sending high

voltage (110vac or 220vac) to the elevation motor.

AC PWR (green) - The AC PWR (Alternating Current Power) illuminates when AC line voltage is

delivered to the treadmill. It then passes through the in-line fuse (110)/s(220) and lights the AC PWR

LED.

+12V (green) - When the proper AC voltage is delivered to the treadmill, passes through the in-line

fuse/s, through the full wave bridge rectifier (changes AC to DC), through the transformer (steps down

Step 2:

DC to +12vdc) then the +12V LED lights.
This the board LED, who control the signal for Main Motor+Elevation Motor. You must see, the LED DN+ UP( both will be Lit) in any position down or Up.

2) The RELAY board is designed with diagnostic LED lights. The LED's are color coded according to

their specific function. Green indicates a properly operating treadmill; the green lights should always

be ON when power is supplied to the treadmill. Yellow indicates a treadmill function. Red indicates a

treadmill malfunction. Here is a list of each LED and what it signifies:

AC PWR (green) - The AC PWR (Alternating Current Power) illuminates when AC line voltage is

delivered to the treadmill. It then passes through the in-line fuse (110)/s(220) and lights the AC PWR

LED.

VDC (green) - The VDC LED will light when it receives DC voltage from the DC power supply.

DN & UP (yellow) - The DN and UP LED lights tell us if the elevation DN and UP relays are

functioning properly. When the LED lights, it tells us that the relay has energized and is sending high

voltage (110vac or 220vac) to the elevation motor.

UPSW (green) - This LED will illuminate when the low voltage dc is delivered from the upper display

board to the elevation UP relay. This low voltage dc is what energizes the coil of the relay.

DNSW (green) - This LED will illuminate when the low voltage dc is delivered from the upper display

board to the elevation DOWN relay. This low voltage dc is what energizes the coil of the relay.

BELTSW (green) - This LED will illuminate when the low voltage dc is delivered from the upper

display board to the belt (motor start) relay. This low voltage dc is what energizes the coil of the relay.

SPD (yellow) - The SPD LED flashes on and off (relative to speed) when the speed sensor is

operating properly.

PWM (yellow) - This LED will light when the upper board is sending a speed signal to the PWM.

Both the PWM LED and BELTSW LED must be lit for belt movement.
Finally this this Relay Board, the Each Led will be Lit, for any Relai control for DN down, or UP for elevation Motor. You must clean contact of the Relay with Special Spray(Radio Schack).

With this you must fix it.

Step 3:

Try this again. and fix it.b) LUBE the gear motor, shaft and turn the POT a little and see if the motor get RPM.

The Steps for Newer Style Console Calibration:

  1. Locate the calibration area on the rear or underside of the console (a hole, near the console's center, that goes through to the electronics board. (This hole should not have a screw in it.)

  2. Insert a pencil (eraser end), into the hole and feel around for the cal button (will click when pressed).

  3. Press the button 2 times (with the pencil eraser). The first click should show CL11 in the console, the second click should show CL21.

  4. If the process was done correctly, and CL21 appears in the console, you are in "calibration mode." The next few steps consists of pressing buttons on the console and observing settings. This will not require any other tools.

  5. Press ENTER. CL22 should display in the TIME window and (??) in the SPEED window.

  6. Press ENTER. CL23 should display in the TIME window and (??) in the SPEED window.

  7. Press ENTER. CL24 should display in the TIME window and (??) in the SPEED window.

  8. Press ENTER. CL25 should display in the TIME window and (??) in the SPEED window.

  9. Press ENTER. CL26 should display in the TIME window. You should then see the letter "E."

  10. Press ENTER. You should see "SS" or "55" in the console.

  11. Push the STOP/START button. For safety, at this point, you should step off, or be off, the treadmill.

  12. Push the ENTER button. The walking belt should start to move, accelerate to maximum speed, then stop on its own.

  13. When the belt stops, the incline should self test by raising to its highest incline position, then lowering back down to its lowest position.

  14. Once the incline test is complete, push the POWER button 2 times. The unit should shut off and the console should go completely blank. If this happens, the treadmill is done calibrating and is ready for use.

  15. If the letter "F" appears in the SPEED or INCLINE window when the power button is pressed 2 times, the treadmill is indicating a failure somewhere either in the SPEED or INCLINE (depending on the window the "F" appeared in).

1_7_2013_8_21_43_pm.jpg1_7_2013_8_22_06_pm.jpg

Jan 07, 2013 | Vision Fitness T9550 Folding Treadmill

1 Answer

Initial calibration keeps failing. the treadmill will not elivate


Step 1:

please see this test and fix it. God bless you

The Steps for Newer Style Console Calibration:

  1. Locate the calibration area on the rear or underside of the console (a hole, near the console's center, that goes through to the electronics board. (This hole should not have a screw in it.)

  2. Insert a pencil (eraser end), into the hole and feel around for the cal button (will click when pressed).

  3. Press the button 2 times (with the pencil eraser). The first click should show CL11 in the console, the second click should show CL21.

  4. If the process was done correctly, and CL21 appears in the console, you are in "calibration mode." The next few steps consists of pressing buttons on the console and observing settings. This will not require any other tools.

  5. Press ENTER. CL22 should display in the TIME window and (??) in the SPEED window.

  6. Press ENTER. CL23 should display in the TIME window and (??) in the SPEED window.

  7. Press ENTER. CL24 should display in the TIME window and (??) in the SPEED window.

  8. Press ENTER. CL25 should display in the TIME window and (??) in the SPEED window.

  9. Press ENTER. CL26 should display in the TIME window. You should then see the letter "E."

  10. Press ENTER. You should see "SS" or "55" in the console.

  11. Push the STOP/START button. For safety, at this point, you should step off, or be off, the treadmill.

  12. Push the ENTER button. The walking belt should start to move, accelerate to maximum speed, then stop on its own.

  13. When the belt stops, the incline should self test by raising to its highest incline position, then lowering back down to its lowest position.

  14. Once the incline test is complete, push the POWER button 2 times. The unit should shut off and the console should go completely blank. If this happens, the treadmill is done calibrating and is ready for use.

  15. If the letter "F" appears in the SPEED or INCLINE window when the power button is pressed 2 times, the treadmill is indicating a failure somewhere either in the SPEED or INCLINE (depending on the window the "F" appeared in).


Step 2:

The SCR lower board is designed with diagnostic LED lights. The LED's are color coded according to

their specific function. Green indicates a properly operating treadmill; the green lights should always

be ON when power is supplied to the treadmill. Yellow indicates a treadmill function. Red indicates a

treadmill malfunction. Here is a list of each LED and what it signifies:

MOTOR (yellow) - The MOTOR LED illuminates when dc (direct current) voltage is sent to the drive

motor. The LED gets brighter when the dc output is increased.

RLC (yellow) - The RLC (R = Reactance / L = Inductance / C = Capacitance) LED illuminates when

the filtering system is properly working. The filtering system includes the capacitor and filter choke. If

there is a short in either component then the RLC light will not come on.

DN & UP (yellow) - The DN and UP LED lights tell us if the elevation DN and UP relays are

functioning properly. When the LED lights, it tells us that the relay has energized and is sending high

voltage (110vac or 220vac) to the elevation motor.

AC PWR (green) - The AC PWR (Alternating Current Power) illuminates when AC line voltage is

delivered to the treadmill. It then passes through the in-line fuse (110)/s(220) and lights the AC PWR

LED.

+12V (green) - When the proper AC voltage is delivered to the treadmill, passes through the in-line

fuse/s, through the full wave bridge rectifier (changes AC to DC), through the transformer (steps down

This the board LED, who control the DC to +12vdc) then the +12V LED lights.
signal for Main Motor+Elevation Motor. You must see, the LED DN+ UP( both will be Lit) in any position down or Up.

2) The RELAY board is designed with diagnostic LED lights. The LED's are color coded according to

their specific function. Green indicates a properly operating treadmill; the green lights should always

be ON when power is supplied to the treadmill. Yellow indicates a treadmill function. Red indicates a

treadmill malfunction. Here is a list of each LED and what it signifies:

AC PWR (green) - The AC PWR (Alternating Current Power) illuminates when AC line voltage is

delivered to the treadmill. It then passes through the in-line fuse (110)/s(220) and lights the AC PWR

LED.

VDC (green) - The VDC LED will light when it receives DC voltage from the DC power supply.

DN & UP (yellow) - The DN and UP LED lights tell us if the elevation DN and UP relays are

functioning properly. When the LED lights, it tells us that the relay has energized and is sending high

voltage (110vac or 220vac) to the elevation motor.

UPSW (green) - This LED will illuminate when the low voltage dc is delivered from the upper display

board to the elevation UP relay. This low voltage dc is what energizes the coil of the relay.

DNSW (green) - This LED will illuminate when the low voltage dc is delivered from the upper display

board to the elevation DOWN relay. This low voltage dc is what energizes the coil of the relay.

BELTSW (green) - This LED will illuminate when the low voltage dc is delivered from the upper

display board to the belt (motor start) relay. This low voltage dc is what energizes the coil of the relay.

SPD (yellow) - The SPD LED flashes on and off (relative to speed) when the speed sensor is

operating properly.

PWM (yellow) - This LED will light when the upper board is sending a speed signal to the PWM.

Both the PWM LED and BELTSW LED must be lit for belt movement.
Finally this this Relay Board, the Each Led will be Lit, for any Relai control for DN down, or UP for elevation Motor. You must clean contact of the Relay with Special Spray(Radio Schack).

With this you must fix it.





Step 3:

please lube the elevation motor, shaft, and gear, and adjust the POT for RPM, and see what happen. see the diagram + block diagram attached for troubleshooting and fix it.
God bless you
1_7_2013_8_26_09_pm.gif1_7_2013_8_26_56_pm.jpg1_7_2013_8_27_18_pm.jpg

Jan 07, 2013 | Vision Fitness T9550 Folding Treadmill

2 Answers

Internal problem galaxy 3000 ups


The question is not clear... which of the LED`s are lit?? green, yellow, red.is there a message on the screen??

May 18, 2012 | MGE UPS Galaxy 3000 UPS System

1 Answer

When I plug in my jet 3 ultra the ammeter reads 0. If I turn on the vsi controller the top led display( 3 red, 4 yellow, 3 green) are all lit. I see where that means high battery voltage. The lower led...


Its showing you the voltage out put for the charger if all power lights are lit and the chager is pluged in if batteries show only 2vlts then they are no good and the will not charge up thats why amp meter is on 0

Mar 03, 2010 | Jet 3 Ultra Power Chair

1 Answer

Cluster not showing anything


The Driver's Information display works on a LED principle. It gets worn out and the dealership tells me that in order to fix this, it has to replace the whole instrument cluster. But once the light changes on top to a yellow, that means that one of the secondary warnings is coming on. Talk to your dealership and find out if they say the same thing.

Feb 01, 2009 | 2000 Audi A4

1 Answer

Pc wont read monitor


If you look at the monitor there will be an led light on the front that is always orange or yellow when the computer is off but still connected to the monitor. This led will turn green when the computer boots up, sometimes even showing a "no signal" display before boot. If you see the 'command line'  text during the boot process (video info, BIOS version, POST text, etc) then the monitor is being recognized by the computer. If that text goes away and the led goes back to orange then it is a driver or operating system problem. Pressing whatever key is prompted at the lower left of the display, if you have a display, like F1, F2, F10, Delete or whatever will get you to the setup program and all is good with the display/computer connection and a green light will stay on. If you never get that green led light then either the video card is bad or not seated properly 

Nov 16, 2008 | HP PAVILION A6230N DESKTOP PC

Not finding what you are looking for?
DXG Technology DXG-305V Digital Camera Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top DXG Technology Cameras Experts

kakima

Level 3 Expert

102366 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Cindy Wells

Level 3 Expert

5186 Answers

Are you a DXG Technology Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...