Question about NorStar Meridian M7310 Phone

1 Answer

Meridian norstar want to delete and enter new numbers

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 105 Answers

If you are asking about Outside Auto Dial numbers (a "speed dial" number programmed to a button), follow these steps:
1. Leave the handset down
2. Dial "Feature (star) 1"
3. Press the button to be programmed
4. Enter the "speed dial" number
5. Press button under "OK" on the horizontal display.

The group of 12 buttons on top of an M7310 phone are Dual-Memory buttons, each can hold 2 speed dial numbers. When you press the button, you are using the Lower Memory location. When you press the Shift button (triangle-shaped button on the right) and the a Dual-Memory button, you are using the Upper Memory location. Good Luck!

Posted on Jul 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why doesn't one phone in my norstar meridian m7310 phones is not displaying caller id


Either COPY the config settings from a set where it works to those that don't, or on the sets that do not:

F**CONFIG, Terminals&Sets, (enter ext #), ... Telco Features, 1st Display Name: change between Name, Number, or Line.
And remember that some callers (esp Cellphones) do not provide Name info, so if the incoming calls at that extension are mostly from the same #s, it might be normal.

Aug 11, 2014 | NorStar Meridian M7310 Phone

1 Answer

I have a Meridian Phone (Norstar System). How do I set the number of rings?


Feature 985 write down number displayed

Feature **266344 then 266344

displays Terminals and sets

press top left lit button displays show set
enter extension number

press top left lit button again

press bottom left lit button one time or until you see capabilities

press top left lit button

press bottom left lit button until you see fwd to

press change

enter number you wrote down in the first step

press rls

Jan 11, 2011 | NorStar M7310 Corded Phone

1 Answer

How can I erase numbers from programmed memory buttons without entering new ones?


Press feature *1, then press the key you want to erase, and press the ok soft key without entering in any numbers. This will erase any speed dial or feature you have programmed under that button.

Oct 25, 2010 | NorStar Meridian M7310 Phone

1 Answer

We have the Norstar Meridian (M7310) telephone system and would like to change after hours message. I cannot locate this information in our book. How do we change it?


To re-record greetings, enter Feature 983. if your system has 2 digit intercom #s your default password is 120000 if your system has 3 digit intercom #s your default password is 1020000. once you have entered the password you will see 3 selections you can make .use the three soft keys under the display and select AA (auto Attendant). next press greeting and greeting again. next it'll ask for the greeting number your probably working with greeting either 2 or 4 (you might want to listen to the greeting first). press record to start and ok when finished. dont forget to save the greeting or it will be deleted if you exit early. hang up when finished

Jan 08, 2010 | NorStar M7310 Corded Phone

1 Answer

We have a Norstat Meridian M7310 phone system - is


THE PHONE IN THE BACK IS THIS A NORSTAR PHONE. WHAT IS THE QWEST VMAIL AND WHAT DOES THE NORSTAR SYSTEM LOOK LIKE . SOUNDS TO ME THAT QWEST IS SUPPLING VMAIL AND NOT YOU OWEN NORSTAR COULD YOU CLARIFY THIS FOR ME.

Dec 17, 2009 | NorStar Meridian M7310 Phone

1 Answer

How do we remove an extension from a hunt group in a Norstar Meridian M7310 telephone?


Programming2.gif is done on 7310, 7324 and 7316 type sets.Enter programming2.gif by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming2.gif.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you want to change the pool2.gif on.
Press the next key 6 times (bottom right arrow) .
The display should say System Prgrming.
Press the show key (top right arrow)
The display should say Hunt groups
Press the show key (top right arrow)
The display should say Show Group:
Enter in the group number of the member that you wish to delete.
Press the show key (top right arrow)
The display should say Member DNs:
Press the show key (top right arrow)
The display should show members for that group.
Scroll to the member you wish to delete.
Press the Remove soft key.
Press the heading key(top Left arrow) till the display says Show Group: again.
Enter in the group number you wish to to change the deleted member to
Press the show key (top right arrow)
The display should list the current members of that list
press the Add soft key.
enter in the DN of the member you wish to add
Select Appr & Ring setting for the hunt group member
Press the release key when finished

Sep 30, 2009 | NorStar Meridian M7310 Phone

1 Answer

How to page a specific exten through the speaker on the Norstar meridian m7310


Press your voice call key (or feature 66) and the extension number.

Sep 17, 2009 | NorStar Meridian M7310 Phone

1 Answer

I have a Norstar Meridian with M7310 phones. When calling out using the speakerphone, the microphone doesn't work. When trying to switch to hands-free during a call, it puts the line on hold.


sounds like your telephones not programmed for handsfree.
Programming2.gif is done on 7310, 7324 and 7316 type sets.Enter programming2.gif by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you want to change to handsfree.
Press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the show key (top right arrow) .
The display say foward no answer.
press the next key 3 times (bottom right arrow)..
The display should say handsfree. Press the show key.(top right arrow) change from none to auto
Press the release key when finished

Sep 14, 2009 | NorStar Meridian M7310 Phone

1 Answer

Deleting security code from Norstar Meridian M7208


Go to programming of Norstar bY Feature**266344 passwordwill be 266344.

Press show put the extension number then show the keep pressing next until display shows restrictions.Press show the next until dispaly shows ext rest. then show then show again and check what is the restriction filter number.
Press heading till u get restrictions.press show then show again. put the restriction filter code and delete or remove all restrictions from the filter and press release and come of the programming.
Restriction has been removed now.
After that u can easily make o/g calls without using any code.

May 05, 2009 | NorStar T7208 Corded Phone

1 Answer

Norstar ICS 4.0 password


How to Change a Mailbox Password 1. To access the voice mail system press "Feature".
2. Press "983".
3. When you see "Log:" enter "120000" for 2 digit extension numbers, enter "1020000" for 3 digit extension numbers.
4. Press "OK".
5. Press "MBOX".
6. Press "CHNG".
7. Enter the mailbox number you wish to reset.
8. Press "Reset".
9. Press "Rls" to exit (orange button to the right of the number buttons).
Default password is "0000".

Jun 20, 2008 | NorStar Meridian M7310 Phone

Not finding what you are looking for?
NorStar Meridian M7310 Phone Logo

Related Topics:

360 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

kakima

Level 3 Expert

102366 Answers

dan4261

Level 1 Expert

14 Answers

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...