Question about Lands Phones

Open Question

Dukane msc 350

I have a room 11 that when push button wont ring console but console can intercom room. Changed to another port but in a half hour or so that room started ringing the console. So moved them back. Anyone got a suggestion on this problem?
Thanks

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Avaya Partner-18D office phone-After an intercom call, the receiver's phone rings

Try hitting the speaker button and intercom your boss. When you hit the speaker button to hang up, do you get the same thing? If not. It could be that the gray "clicker" switch that pushes down when you put the handset back isnt going all the way back down...

Let me know.

Posted on Dec 29, 2007

  • 43 Answers

SOURCE: voice vs ring on intercom

Speaker - "60" - Speaker.

This is the default setting for Voice / Tone toggle.

Posted on May 10, 2008

  • 1 Answer

SOURCE: phone ringing after power failure

I believe you have to reset the intercom system, meaning you need to reassign one or all of the phone's intercom numbers. To assign intercom # ( found on page 10 of the manual which you can download online)

1 Do NOT lift handset
2 Press the following 3 buttons (in order) PROGRAM, STAR, and then POUND
3 Enter two digits (the number you want the phone to be)
4 Press the INTERCOM button and you will hear a tone - then youre all done.


Posted on Feb 17, 2009

  • 1 Answer

SOURCE: ATT/Lucent 854 ringing after power outage

Press PROGRAM
Press *
Press #
Enter 2 digits (11 through 22)
Press INTERCOM

This should work.

Posted on May 06, 2009

  • 1 Answer

SOURCE: Our customer has a Dukane MCS350 Intercom System.

put bell schedule to schedule 0

Posted on Mar 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Partner 18d phone wont program


Either you're not at ext 11 or you are pressing the RIGHT intercom button. It's FEAT 00 LIC LIC (where LIC is left intercom). If it doesn't work, try the same code from Ext 10. Also, you have to have an 18 or 34 button display set.

Sep 27, 2012 | Avaya Corded Phone avaparp18d

1 Answer

We have one incoming line that we don't want to ring. How do we program the Avaya System to stop ringing when a call comes in on that line?


At ext 10 or 11
press feature 00
LEFT intercom
LEFT intercom
Right intercom
enter extension number to change ringing on
the line buttons will light up if you touch the line it will change the flashing and the ring style.

Once done, press feature 00

Repeat for all phones.

Aug 03, 2011 | Avaya 700340193 Corded Phone

3 Answers

I have a Dukane MCS350 intercom system, everything works on the system when bottons are pushed, however there is no sound from any speakers... when you call a room, it states the room number with a...


A room number preceded by a 'P' indicates the room is in privacy mode. This could be the room switch is in privacy mode, or there is a wiring issue. In this mode, the room can hear calls/pages, but you cannot hear the room from the console.
If the room cannot hear pages/calls, then you have a wiring problem.

Jan 10, 2011 | General Electric Lands Phones

1 Answer

Mls12d to turn on local ringer


First of all, is it programmed to ring? From Ext 10 or 11 press FEATURE 00 LIC LIC RIC and dial the extension you want to look at programming. The line buttons will light up. They will be SOLID for RING, SLOW BLINK for DELAY RING, or FAST BLINK for No Ring. Just keep pushing each line button until you get what you need. When you're done, press FEATURE 00.

LIC is LEFT INTERCOM RIC is RIGHT INTERCOM button.

Easy enough :-)

Carl

May 17, 2010 | AT&T Lucent MLS-12D Phone

2 Answers

Hello.. We have the parter-18D phone system. one of the phone rings when there is an incoming call, but it shouldn't, since this is not the main phone Ext 10. How can I program this phone to ring only...


Changing ringing on a Partner system is done on either ext 10 or 11.
At one of those ext's press the feature key and "00"
Next press the left hand intercom twice
The display should say system programming

Press the right hand intercom once. The display should say Centralized Programming.

Enter in the extension number that you want to program.

Press the line that you want to ring.
A solid light on the line means immediate ringing
A slow flashing light means delayed ringing (meaning the phone will wait 3 rings before starting to ring.)
A fast flashing light means no ringing.

When finished with that station press the right hand intercom and enter in the next extension to program and set ringing accordingly.

Press feature "00" to logout

May 06, 2010 | Lucent PARTNER18 Corded Phone

2 Answers

Want to turn the ringer off unless receiving a transfer.


This feature determines how each outside line or pool assigned to an extension rings. You can specify Immediate Ring, Delayed Ring (telephone rings after a 20-second delay), or No Ring. Delayed Ring is useful for backup coverage on shared lines or pools, such as for secretaries who cover each other’s lines. No Ring is useful for all extensions except 10 when an operator answers all calls, or for telephones with no regular users, such as those in conference rooms. To change the way outside lines or pools ring at an extension:
To change the way outside lines or pools ring at an extension: 1 Press "Feature" , "00", "System Program ", "Central Tel Program" at extension 10 or 11.
2 Enter the number of the extension to be programmed for Line Ringing. The green lights next to the line or pool buttons show the current Line Ringing settings for all lines or pools assigned to the extension. (If a line or pool is not assigned to a button, the green light next to that button is off.) The following ringing options can be shown by the green light next to the line or pool button: • Immediate Ring — on steady • Delayed Ring — flashes slowly • No Ring — flutters quickly • Immediate Ring is the factory setting for lines; No Ring is the factory setting for pools.
3 Press the line or pool button until the button light shows the correct setting (the setting for the currently selected line or pool also appears on the display).
4 Continue programming, or exit programming mode.

Aug 06, 2009 | AT&T Lucent MLS-12D Phone

1 Answer

Phone not ringing


This feature has to be enabled on extension 10 or 11
Press Feature 00, left intercom, left intercom, right intercom
enter your extension number
press line button until it is in the solid state and display say immidiate.
Press Feature 00 to exit programming.

Cheers

Jul 09, 2009 | AT&T Lucent MLS-12D Phone

1 Answer

How do you turn the ringers off on the phone?


Do Not Disturb (Feature 01) will turn the ringing off of a phone, but it will also send any lines assigned to ring on that phone to voicemail (if applicable).

OR, to turn ringing off in system programming:

From ext. 10 or 11, press Feature button, 00, left intercom button twice, right intercom button once. Enter extension number of phone you wish to remove the ringing line from. Light indicators next to line keys show ringing status. Press line keys to desired ringing preference for each line-
steady green light- immediate ring
green fast flutter- no ring
green slow flash- delayed ring
Press "feature" 00 to exit

Mar 06, 2009 | AT&T Lucent MLS-12D Phone

1 Answer

Phone ringing.


On extension 10 or 11 press Feature 00
Left intercom, left intercom, right intercom
Enter your extension number
Press line buttons until its a fast blink and display say no ring
Feature 00

only transfered calls will ring

Nov 21, 2008 | AT&T Partner 18 Phone (315805B)

1 Answer

Lost programing


From extension 10.
you have to set the ringing.

feat 00
left intercom twice
right intercom once
enter ext number
touch the lines util they display how you want them to ring
feat 00 when done.


To set the feature to p/u a ringing call
feat 00
left intercom twice
right intercom once.
press: ** (then press lines in order 1, 2, 3, 4, etc)
then press ** again.
feature 00

repeat both for all extensions.

Mar 05, 2008 | Lucent PARTNER18 Corded Phone

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...