Question about HP PSC 1315 All-In-One InkJet Printer

1 Answer

HP psc 1315 all in one-printing cards

Printer will stop halfway through when printing greeting cards. I've tried every paper setting. My paper is inkjet compatible, matte white, photo quality, half-fold, pre scored, avery 3265 (staples equivalent) 230 g/m

Please help, Diana Marino

Posted by on

  • Anonymous Dec 20, 2007

    ขอบคุณครับ

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 208 Answers

Make sure you check the settings in the print driver. Sounds like your paper size settings do not match the size of the paper that you are printing onto and you are actually getting a false jam because the machine is seeing a different size paper then you ahve in it.

Posted on Dec 20, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My hp 1315 check paper is blinking


un clip the back door there might b a jam of paper that u cant see but printer can detect once u have done that u must !! pres enter 2 reset it after u have replaced the rear door of course

Sep 28, 2012 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

My printer hp psc 1315 stops in the middle of printing cd labels or anything thicker than regular bond paper. It prints the design perfectly on regular bond paper. I already set the PAPER TYPE to PHOTO and...


It's not a printing problem ' it's your networking' try using the cable provided with your printer via usb' if it prints ok' then you need to reconfigure your printer settings' updates or clean re install.

Oct 13, 2017 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

How to print borderless 5 x 7 pictures using an HP psc 1310 series printer I'm using 5.0" x 7.0" hp premium glossy photo paper and a hp psc 1310 series printer and i cannot align the paper properly to...


Open printers window, right click on the psc printer icon , select printing preferences, click on paper\quality tab, select the paper size as 5x7, check the option as borderless printing and click on apply and then oK...
Try to print ,,,

Dec 07, 2009 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Hp psc 1315 paper jam


Hi,



. Switch off the printer and disconnect the power supply. Allow any residual charge inside the all-in-one printer to dissipate before putting your hands or any metal tools inside the chassis.

2.
Pin down the exact location of the jam. The 3 hot spots for a jam are before a sheet completely leaves the paper tray, anywhere between the feed tray and print carriage or between the print carriage and output tray.

3.
Take off the front paper tray if the sheet jammed while still in the front area of the printer. If here, you should be able to see most of the paper.

4.
Pull the sheet with both hands and steady pressure. Do not tug as you might rip the paper, leaving a piece deeper inside the machine.

5.
Open the back panel to reach paper jammed between the feed-tray area and print carriage. Carefully remove the jammed paper.

6.
Use the carriage access door to get at a jam further inside the printer. You may need to remove the print carriage to get to the jam.

7.
Replace all parts and return any access panels to their closed and locked positions. Plug your printer back in and flip the power switch.

Jun 18, 2008 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Hp psc 1315 paper jam


my printer no function cant print

Jun 17, 2008 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Rogue jam


When on printer print test page always

Apr 08, 2008 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Printer jam


open top cover of your printer and put a couple of drops of 3 in 1 oil on the carrige bar ( THE BIG SILVER BAR THE INK CARTRIDGES RIDE ON)

THEN CLEAN ALL THE RUBBER FEED ROLLERS WITH A MICROFIBER TOWEL MOISTENED WITH ISOPROPANOL ALCOHOL THEN TRY THE PRINTER AGAIN

Jan 11, 2008 | HP PSC 1315 All-In-One InkJet Printer

Not finding what you are looking for?
HP PSC 1315 All-In-One InkJet Printer Logo

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...