Question about Water Heaters

1 Answer

My dad has a valliant boiler VP4 ZE15 IT IS AROUND 3 YEARS OLD IT ISNOT IGNITING I HAVE TURNED PRESSURE UP AND HELD THE BUTTON IN FOR A MINUTE. i CANNOT FIND WHWERE THE RESET BUTTON IS TO TRY THIS PLEASE HELP

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,185 Answers

Turn the power off at the wall , wait 60 seconds and the boiler will automatically reset.

Modern boilers are complex re safety and the boiler will only start if the exhaust fan is running and is up to speed .

The vacuum caused by the fan trips a switch and allows ignition to continue

If the pilot light does not come on it does not warm up the thermocouple which turns on the main gas valve.

If you go to the Valliant website they will supply you with a user guide

Posted on Sep 28, 2009

Testimonial: "thanks great help"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset the thermal cut off switch on a vaillent boiler?


Hi, what model Valliant and are there any fault codes showing?

Feb 21, 2015 | Water Water Heaters

1 Answer

Water to hot for gas boiler boiler gos off


It could be dyslexia, but I think you want to know what may be wrong with your boiler in this case!
This is a VERY old design. The diaphragm is on the water section, this operates a switch to turn ON the pump, and a further device causes the diverter valve to divert boiler water from CH duty to HW duty.
From your description it appears that the boiler is shutting down on internal boiler water temperature (too high), your 'briefly too hot' HW symptom may be caused either by the boiler side of the secondary heat exchanger being blocked/caked in sludge, OR the DHW side of it being scaled. Either way a new or replacement (descaled) secondary heat exchanger MAY inprove things. It's not easy on these old clunk-pots, and EVERY disturbed seal will subsequently leak, so get a good supply of o-rings and fibre seals before you start ("you" being the competant fitter you employ)

Dec 20, 2012 | Water Heaters

1 Answer

Hi there. Our valiant boiler doesn't seem


Lack of pressure in the primary circuit [radiators] Look for a pressure gauge should read between 0.5 & 1.5 bar
Somewhere there is a tap/valve/pipe connection to refill & looks like a small thumb turn or a screwdriver turn on a connection on the mains water inlet pipe. turn on until you get the right pressure then off

Dec 16, 2009 | Water Heaters

1 Answer

I cant get the pressure up on my valliant eco tec pro please give instructions


eiter you have a faulty filling loop or presure gauge,i asume you know how to put water in?

Oct 05, 2009 | Protech Systems FasNSeal FSWMKE4 4" Vent...

1 Answer

Vokera mynute 14se lockout reset button on


Has the boiler cool down? Try turn the power off for a few minutes and see if that will work.

Mar 14, 2009 | Water Heaters

1 Answer

Hot water


there are two main faults with combi boilers not giving hot water. one is a faulty flow sensor, the other is the most common which is a blocked heat exchanger caused by debris and scale in the system. this needs to be flushed out or may require a new heat exchanger depending on the age and condition of the boiler some plumbers may suggest a new boiler.

Mar 02, 2009 | Water Heaters

1 Answer

Valliant turbomax manual


hi ian
most boiler manufacturers now days have downloadable manuals on there web sites.
just type in "vailant boilers" and flix through until you find the correct page. if they haven't a download you can request a copy on the "contact us" page .
i hope this has been some use

Jan 23, 2009 | Water Heaters

Not finding what you are looking for?
Water Heaters Logo

Related Topics:

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Water Heaters Experts

Donni Steen

Level 3 Expert

659 Answers

Brad Brown

Level 3 Expert

15557 Answers

Gil Shultz

Level 3 Expert

3368 Answers

Are you a Water Heater Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...