Question about RTO M-D Building Products Carpentry & Construction Box Beam Level 48"

1 Answer

Building a floor to ceiling built-in bedroom cupboard

I want to build a 2400mm long, 2350mm high and 600mm deep cupboard with two sliding doors. I only have minimal carpentry experience and need advice on what to do and how to do it.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 41 Answers

First you need proper tools there are books out there that have projects like this that aren't necessarily the same size but give you a good starting point and tell you what tools you need.

Second get a friend or friend of a friend that has some knowledge of carpentry I do not recommend someone with little or no skill to try and tackle a project like this.

Last see what space you have to work with and what you would like to do with that space get rough measurements and see how much material and hardware you would need.

Again I stress make sure you have someone to help guide you in your endevour.

Posted on Jan 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My kitchen looks old and has lost its lustre, and I am in need of kitchen remodelling work done. Can anyone suggest a reputed home- finished carpenter?


I had was recently clueless and confused about hiring a professionally skilled team on contactors for lending me the best kitchen and bathroom remodeling Lynnfield MA services, until and unless I came across the popular carpenter named Paul's Carpentry of USA. I was speculating about its performance, and hence hired it after background research and called up the references given by the team. To my surprise, they served my home with the most satiating bathroom and kitchen remodeling Lynnfield MA experience, coupled with high quality and dedicated custom cabinets and installs Lynnfield MA works done. They charged reasonable price for the total finish carpentry Lynnfield MA package, and the contractors were trained, insured and licensed. Thus, if you are looking for a reliable home finished carpenter with 100 percent customer satisfaction ensured, choose Paul's Carpentry.

Mar 03, 2018 | Home Security

1 Answer

Pocket door cavity construction. How is it done?


Need much more information to give an answer Stephen. You posted in the Cars and Trucks section but I have never seen any vehicles fitted with pocket doors.

Pocket doors are more likely to be found in quality kitchen cupboards or small apartments where space is such a premium commodity an open door is an intolerable nuisance and so the door is made to open and then slide out of the way into a pocket door cavity.

Mar 24, 2015 | Cars & Trucks

1 Answer

Good Evening, My mum purchased a kupperbusch built in oven over 15 years ago. The grill is no longer working and fan has gone. I will like to purchase a new one the same size. H 89cm W 556.5 would this...


Most ovens are based on a modular 600mm width cupboard dimension. Heights can vary but that not so much of a problem so you should be ok with most new ovens.

Check on suppliers websites for details.

Dec 09, 2010 | Kuppersbusch Ovens

1 Answer

GE Profile slide in is 28" counters are 30" what


so the whole is 28" and the range is 30" this sounds like a carpentry task or exchanging for a differnt stove really nothing you can do to the stove I being a carpenter as well as an appliance repairman have cut the counters shorter in order to fit a stove if your not used to doing finish carpentry hire a carpenter it will be well worth the money and shouldn't cost that much to shave off two inches. please message me back if you have any furhter questions and please remember to rank this opinion Thanks again
Rick

Dec 01, 2010 | GE Profile 30" Slide-In Gas Range -...

1 Answer

How do I build a frame that goes inside a brick recess to hold a microwave oven an electric oven and drawers below. The ovens are approx wide600mm drawers will be the same. The hole in the kitchen wall...


I suppose you could build a box in the recess (top, back, and sides) with 3/4 inch plywood and screw cleates to that at the correct levels. This would give you some decent wood to fasten the front trim to as well as provide a robust inner structure for your oven units to mount to. For the drawers, you can make a simple box carcass with the same material to fasten your hardware and slides to. With strength sorted out you can then concentrate on knocking up a pleasant fascia with the wood, tile or laminate of your choice. That's my thought on it. I bet you get a few good answers as that is a good thought provoking project you have there.Regards, Farmerbear

Sep 04, 2010 | RTO M-D Building Products Carpentry &...

1 Answer

My daughter needs to build San Juan Bautista Mission


milk-quart-1/2pint cartons ,egg.cartons and empty tube from paper towels spray paint

Feb 22, 2010 | RTO M-D Building Products Carpentry &...

1 Answer

I HAVE A SIGMA 600MM MIRROR LENS , WITH A


Hi,

The nominal filter size of the Sigma 600mm F8 Mirror lens is 30.5mm(Rear).
The actual filter has a rear screw thread measured across that is approx 22mm.

Does this look like what you have?
If you look for Sigma 600mm mirror filters on the web you may find some.
As you can see by the photo the filters are mainly for film use.
9337f3c.jpg

Feb 02, 2010 | Sigma Super Telephoto 600mm f/8.0 Mirror...

1 Answer

Parlaiment hinge problem


Yes the hinges are faulty take them back and exchange them at the hardware store you purchased them at.

Sep 13, 2009 | RTO M-D Building Products Carpentry &...

1 Answer

Rangemaster toledo DF 90 what is the minimum door width through which these cookers can be fitted?


Yes, the handle, doors and knobs can all be removed, in fact (If I remember correctly) the unit is delivered with at least the handle/rail at the top not fitted. I would still suggest that you visit the supplier with a tape measure and suggest that if they want sell you a unit, they reassure you by showing you a packaged unit, or demonstrate the removal of the handle.

Sep 24, 2008 | Rangemaster Toledo 90 (Dual Fuel) Dual...

1 Answer

Door speakers


You will not be able to get much fill from door speakers. you could go splits in the doors, but they are build for MID and HIGH range. My advice to you is to POD yours doors out, so you get a better depth for your speakers. The best speaker I know for such an application is a Kenwood 8", 4 way. They are fairly deep, so you will need to pod. But they have wicked midrange.

Mar 23, 2008 | Car Audio & Video

Not finding what you are looking for?
RTO M-D Building Products Carpentry & Construction Box Beam Level 48" Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top RTO Measuring Tools & Sensors Experts

jdthefixer

Level 3 Expert

744 Answers

Steve

Level 3 Expert

3289 Answers

Tim Venetis

Level 2 Expert

259 Answers

Are you a RTO Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...