Question about Microwave Ovens

1 Answer

I have bought the discontinued MEK7000AU and I need the accessories blender and shredder (I didn't realise that it was about to be cut). Is there a bosch graveyard where I could obtain them (Spare Parts?). I havent even used my mixer, and without the other accessories it was a very expensive mixmaster.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Microwave Ovens Master
  • 3,614 Answers


Try to look HERE and contact them if they have the accessories for that.

Posted on Sep 28, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Is the blades supposed to come off when I take the container off of the blender.. My blender is brand new sat for 3 or 4 years after I bought it. . The first time I used it , it was extremely hard to get...

You did not specify a brand or model number of your blender; however, most blender jars will lift off their power base without turning or with only very little turning motion to release them from the base. The blade assembly should NOT come off as you remove the blender jar from the power base.

Were you successful in removing the bottom ring which normally screws on to the bottom of the blender jar from the powerbase?

You should make sure you have properly attached the blade assembly for your brand/model.

The blender blade assembly should be held on to the bottom of the blender jar by the bottom ring which screws on clockwise; most will have a sealing gasket that fits between the blade assembly and the sealing surface of the blender jar to prevent any leakage while in use. It will take much more turning to unscrew the bottom ring to release the blade assembly than it should to release the bottom ring from the powerbase.

Assemble your blender jar and blade assembly and try a dry run by placing on the powerbase, giving a couple of bursts of power, and then seeing if you are able to remove without the blender ring unscrewing.

Make sure you are comfortable with the action required to remove the blender jar from the powerbase before you put in to use.

Good luck!

Jul 31, 2011 | Microwave Ovens

1 Answer

I need an owners manual for the Mega Pro Blender: HPB270N Where can I get one?

It looks like your blender is actually made by Waring. The best option is to go to their website and request a manual from them directly.

Jun 08, 2011 | Microwave Ovens

1 Answer

Im trying to take the bottom off my blender but noticed a wierd looking screw,how do i take it off?

I have no idea of the configuration of the screw head that you're looking at, as you didn't see fit to give us any discription, however, it probably wouldn't have made any difference because there are 5 - 7 different configurations of screw heads used that are not the normal slotted or philips head screws. They are used in or rather before, a part that, when removed, would let you go places in the appliance that the manufacturer doesn't want the common customer to be. They don't feel there are any parts inside the motor cavity that you could repair, or diagnose, so you shouldn't be in there. There are screwdriver tips available, but only from major parts distributors and they make sure that you either are employed by, or are in the repair business yourself before they will sell to you.
I also have no idea of what brand of a unit you're talking about, but during my last trip through the small appliance aisle at my local Wal-Mart, I'm pretty sure I saw blenders on sale for right around the $15 - $17 mark. A 2 slice toaster was $8.99. It's at the point where it makes about as much sense to just go buy a spare for everything in your kitchen in the way of cooking, or preparation tools and then just throw the old one out when it quits.

Apr 22, 2011 | Microwave Ovens

1 Answer

Bought juicer second hand and just realised it has no manual otherwise exelent condition thank you

You will need brand name and model number regardless of where you go to find one. You can try the link below:
Kitchen Manuals

Apr 03, 2011 | Microwave Ovens

1 Answer

I have a Breville Superwizz Duo electronic and I am trying to use the blender however, it doesn't work. I have the blender in the correct position but it just won't work. I've had it for a couple of...

If you were to log on to the manufacturer's web site, I think you will be pleasantly surprised as usually one is able to download, by model number, Customer Instruction Manuals, list of Dealers and Driver downloads as required.

Just Google the manufacturer's name and follow the links. Make certain you are directed to the manufacturer's web site as some search engines direct you to other sites and they charge for the information that is normally free of charge.

I hope this helps.

Nov 01, 2010 | Microwave Ovens

1 Answer

My blender won't power on, the lights don't turn on. I've had the blender for 1 year and have never had any problems with it. In the past month it would only work intermittently, and now it doesn't work...

sometimes something (food etc) gets "stuck" in the lock mechanism, preventing it from turning. unplug the blender and give the locking mechanism a cleaning with a bottle brush or rinsing it under very hot water. also the lock could be broken/chipped, also preventing it from turning.

i must admit that I broke my locking mechanism 5 years ago by not "seating" it correctly and forcing it. my hubby somehow removed! the locking mechanism but now it goes on - turns - as soon as I plug my blender in (because the stop/lock doesn't exist anymore). so I must be very careful to always have the lid on before I plug it in. but it's a braun blender and I love it. so i've kept it all this time.

Oct 06, 2010 | Microwave Ovens

1 Answer

Blender Broken - Durabrand

You should contact Durabrand at the number in your owner's manual.

If for some reason you don't have your owner's manual, I would suggest calling the dealer where you bought it to see if they have a number for Durabrand.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Jan 09, 2009 | Microwave Ovens

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9085 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

76848 Answers

Are you a Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides