Question about Yamaha YSP-800 System

2 Answers

Suddenly the unit has failed - no power at all.

The Yamaha YSP-800 will not turn on. There is no evidence of powering on at all. Plug and fuse are OK. This seems to be a common problem cropping up out of warranty. Any solutions?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 5 Answers

Hi there, I suspect I know what the problem is. If the YSP-800 won't power on at all, you might have the same problem I did with TWO Yamaha soundbars: capacitor rot. I have repaired both my soundbars by replacing ONE capacitor. It's not a difficult job at all and I purchased the replacement capacitor from a high street electronics retailer in the UK called Maplins for 99p. I have written a blog post on how to do this repair on a HTY-750 but I also repaired my YSP-900 in the same way. You will absolutely find that the YSP-800 internals are very similar and it will be capacitor C515 that has failed.

Hope the link helps.

Posted on Dec 19, 2014

  • MrVectrex Dec 19, 2014

    For some reason the link did not post, sorry...I'll try again:https://medium.com/@mrvectrex/fixing-a-yamaha-soundbar-28f22dcdf90c

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have the same problem, fuse ok, plug ok and internal fuse ok. Sent it to reccomended engineer he said it cant bre fixed. only 3 year old, not happy

Posted on Dec 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Power became intermitentnow no power whatsoever changed the plug/fuse but no joy any suggestions


C515 ON THE MAIN POWER PCB (HAS 223 K 630HI PRINTED ON IT) HAS FAILED
Replace with a 22nf capacitor - Maplin part number N38CN -
the new maplin part has a higher voltage rating and is bigger. it will need to be fitted with the leads extended with wire to get it to fit.

Jan 18, 2010 | Yamaha YSP-1100 Digital Sound Projector...

1 Answer

Unit works fine. However when it is switched to standby for a few minutes or longer then powered up. Nothing happens. Cannot hear the click of something, i assume a relay inside the unit. If the unit is...


I got same issue. Solution is to buy a efergy standby eliminator plug so it can respond to the On/Off signal by cutting off and restoring mains power

Dec 20, 2009 | Yamaha YSP-800 System

1 Answer

No power i have checked the fuse in the plug and the lead is fine. Yamaha Ysp1000 sound system


There well my be some internal fuse. If the unit is self powered then the amp may have a problem.

Dec 11, 2009 | Yamaha YSP-1000 Main / Stereo Speaker

3 Answers

No power to the system checked all plugs and cables had been working for 2 years


I cannot know any specific answer but presuming that you have power at the wall socket (don't laugh sometimes it is that easy) a piece of electronics will not work because voltage is not getting to the circuitry inside. The most logical place to look is at the fuse but too often these days that is buried inside the unit and may be soldered on a printed circuit board. It is presumed that users will not fix anything and its certainly cheaper to solder one in than provide a fuse post externally . Clearly in such cases you must open the unit and check. If there is no fuse or the fuse is good it will require an electronic tech to trace the problem further.

Jul 03, 2009 | Yamaha YSP-900

1 Answer

My yamaha ysp800 not working


Same problem out of warranty checked fuses, wiring etc and sent to service engineer who said it was unfixable. Only 3 year old and quite an expensive product. Not happy

Mar 30, 2009 | Yamaha YSP-800 System

1 Answer

Reset system


Dear Customer,

Check it out first power lines is it ok on stabilised,

than check at minimum amplification ,

Amplifier must not have more than
82 W total power:
2 W x 21 + 20 W x 2

check it with passion & care,

THNX.

May 12, 2008 | Yamaha YSP-800 System

2 Answers

Yamaha ysp 800 setup


can you please help me i have no set manual for ysp-800 and can you assist me on how set the microphone up to get the best sounds thanks

Sep 04, 2007 | Yamaha YSP-800 System

Not finding what you are looking for?
Yamaha YSP-800 System Logo

Related Topics:

842 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5011 Answers

The Knight
The Knight

Level 3 Expert

73619 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Yamaha Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...