Question about Hobart A200 Stand Mixer

2 Answers

Hobart mixer A200 Rotation

Hobart mixer A200 is running forward . sometimes it will run reverse. What is the solution for this

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a hobart a200 20qt mixer. the flat bitter is scraping the botttom of the bowl. The shaft looks little bend and i think it is and that is what's scraping the bowl at the bottom on one side only. the whole bowl is not being scraped. it used to work like that and now it does not work at all. the motore is running but the gears are not turing the mixer. Before the first geard stoped working but the other two were okay, now none of them work, but the motore is working.

Posted on Nov 10, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

Assuming the unit is 120v, single phase, my money is on a bad electronic start switch (not to be confused with the on/off switch) It's not visible without some disassembly. Usually, it is located at the rear of the motor cavity. Take note of all the info on your model data plate then go here to obtain a parts breakdown on your particular mixer. http://www.hobartservice.com/Parts/

I'd suggest replacing the capacitor as well.

Posted on Oct 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to invert motor turning direction?


Hobart A200 Stand Mixer
Beatriz, I looked through the entire manual, it shows no reverse option. Did you just get the mixer or did you have it repaired. It seams the mixer is either wired wrong or the gears that rotate the mixer were not assembled correctly.
Check the attached link,manual,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

https://my.hobartcorp.com/kroger/TechnicalServiceManuals/A200%20Technical%20Manual.pdf

A200 Hobart Service

Apr 06, 2016 | Hobart A200 Stand Mixer

1 Answer

Very old a200 ml#....?


Go to this site it is the parts list for the A200 and the A200T

http://hobart.co.kr/manual_pdf//013.pdf


Then go here for parts and parts number confirmation
http://www.food-equipment.com/parts_Hobart_mixers.htm


Hope this helps if so let us know.

Sep 20, 2012 | Hobart A200 Stand Mixer

1 Answer

I've a hobart a200 that i want to recondition. How to remove the motor inspection cover. There 's a bearing with a nut, how to remove the nut, the rotorshaft keeps turning.


First, remove the steel ring sitting recessed into the hole where the nuts are.

Remove the top transmission cover (top front of mixer, two screws) allowing access to the motor's cooling fan blade.

Using a small prybar (or large, if you wish), prevent rotation of the rotor by placing the prybar on one fin of the fan blade, and bracing it against the mixer's frame. Remove nuts with a 3/4" socket and ratchet.

Aug 08, 2010 | Hobart A200 Stand Mixer

1 Answer

Hobart Mixer A200 buzzing. The motor not moving


Have you try to run the motor without engaing of worm gears? The worm gear 15T assembly need to remove in order for motor to run freely. check worm gear attach to motor shaft for any damaging.

Mar 24, 2010 | Hobart A200 Stand Mixer

1 Answer

Seemingly well maintained H600 mixer only runs in reverse...


whoever wired the mixer in , hopefully 3-phase made a mistake on the incoming pwr to term block or the contactor switch any 2 leads this should reverse rotation of the mixer

Nov 04, 2009 | Hobart H600 Stand Mixer

1 Answer

Hobart A-200 mixer (OLD!) runs hot & shuts down.


You have killed it by overloading the bowl. Hobart recomends no more than 65% bowl capacity on doughs & 75% on batters or icings. Replace the motor or the whole unit

May 25, 2009 | Hobart A200 Stand Mixer

2 Answers

Hobart A-200 Motor Direction


No, do not swap hot and N.

First, verify rotation. As the attachment shaft rotates, it should push the engagement pin into the keeper slot. Looking down on top of the mixer, the planetary should rotate clockwise.

If the unit runs backwards, does it start slow? Can you get it to run either way by giving it a push start before turning on the power? If so, your start switch is not working properly. (Which is my guess) Check your capacitor.

There is mechanical and electronic start switches. (Metal arms and a contact or a little gold rectangular metal can.)

Check it out and let me know what you find -- Mike

May 19, 2008 | Hobart A200 Stand Mixer

2 Answers

Motor replacement for A200


If the motor runs and when under a load the planetary stops its not the motor.You either have a sheared key or broken gear in the transmission.

Mar 22, 2008 | Hobart A200 Stand Mixer

2 Answers

Same speed


I believe the speed control needs to be replaced. It controls how much electricity is sent to the motor.

Jan 28, 2008 | Hobart A200 Stand Mixer

Not finding what you are looking for?
Hobart A200 Stand Mixer Logo

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1237 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

1805 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...