Question about Maclaren Quest Mod Stroller

2 Answers

How do i get the seat of to wash?

Just got a maclaren quest, and the seat needs cleanibg, but dont know how to get it off.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 20 times.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 17 Answers
Re: how do i get the seat of to wash?

I was able to find an online instruction manual for this stroller. From that manual, I was able to find the following instructions for removing the seat for cleaning.

Remove hood from stroller if fitted.
A Twist shoulder strap end buckles and feed through holes.
B Feed waist and crotch straps through holes.
C Unclip seat cover retaining straps.
D Unfasten seat fabric from handle tubes and seat base.
E Slide fabric from seat back and base.
F When refitting seat fabric, insert seat back support tubes
into fabric slits.
G When refitting seat fabric to seat base, loop fabric flap over legrest
strap and pass crotch strap buckle through both holes in seat fabric
and then hole in seat base.
H When refitting shoulder straps, twist buckles and feed through holes."

Posted on Dec 18, 2007

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers
Re: how do i get the seat of to wash?

Hi i have the same buggy, on either side you will see clips, the fabric just pulls over them and then u pull it off the top and finally the seat part, straps all go through the holes, i've washed mine dozens of times.

Posted on Jun 05, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Maclaren Quest Stroller Standard - Harness straps too short

Maclaren customer service should be able to assist you with either instructions to loosen your straps or additional strap extensions if available. I have copied their phone number below. Good Luck! MJK
Where can I get an extra copy of the operating instructions for my Maclaren Buggy?

Contact Customer Service at
US: 1 203 354 4400

Feb 10, 2012 | Maclaren Quest Stroller Standard

1 Answer

My maclaren quest stoller has become very difficult to fold up. The folding mechanism is almost siezed up. WD40 does not solve problem.

Silicon spray is the best lubricant to use on strollers but no lubricant can help if there is any distortion to the frame. Remove all the seat fabrics, hood etc to get down to the bare frame than carefully watch how each part moves as you open and close the frame to see if you can find the problem.

Nov 12, 2010 | Maclaren Quest Sport - Navy/Crimson...

1 Answer

My Quest won't open up. It was working perfectly fine yesterday and today it won't open. Pls help.


If the locking catch can be released ok and the stroller wont open still, I would recommend that you go to and find your closest Maclaren Service Agent, who will be happy to take a look at it. You may have some of the seat fabric trapped in the opening mechanism also.

Hope this helps.

Sep 15, 2010 | Maclaren Quest Sport Stroller

1 Answer

Need to fit replacement wheels to a Maclaren Quest


The best way to get parts for the Maclaren is contacting factory.

Please open the page below, select your region and country, and use the Customer Service> Contact link at the bottom of the page to contact Maclaren.

Here the web site.



Aug 22, 2010 | Maclaren Quest Mod Stroller

1 Answer

I need a new hood for my maclaren quest any ideas sells hood and other parts... please open link and check.

Hope it helps.

Jul 07, 2010 | Maclaren Quest Mod Stroller

1 Answer

How do i clean the fabric of the maclaren quest?

Hi this is Sarah from Maclaren,
the seat of your quest is removable and washable by hand or machine, if you have other questions do not hesitate to contact our customer service: ' ); //-->

Feb 21, 2010 | Maclaren Quest Stroller Standard

1 Answer

Maclaren quest pushchair.

Ok, I will try to do this step by step.
1. Place flat screw driver under hub cap and pry off (these we will reuse later).
2. Using diagonal pliers, cut star locks from axle, you should have received new one from Maclaren when you got the wheels, if not you will need to get those.
3.Repeat this process for each wheel.
4. Take off the old wheels and put the new ones on. Put on the new star locks (I use a small hammer), put the hub caps back on and viola, new Mac wheels.

Mar 23, 2009 | Maclaren Quest sport - Placid Blue...

1 Answer

Replacement Wheels for Maclaren Quest

where can i get wheels 4 my maclaren quest

Aug 27, 2008 | Maclaren Quest Sport Stroller

3 Answers

Wheels have worn down

If you go on the Maclaren website, I know that if you are in the UK its how you do it. Then basically look for the repairs tab, then it will give you the option to search for your nearest stockist of these wheels. Beware you may need to travel a distance! Maclaren aren't the best when it comes to customer service, and they need to work on how to improve the back wheels..they do wear down way too fast!
Hope this helps - Failing that I found some on eBay?
Best of Luck
Lucy E - London x

Aug 24, 2007 | Maclaren Quest Mod Stroller

Not finding what you are looking for?
Maclaren Quest Mod Stroller Logo

9,077 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maclaren Baby Strollers Experts

Stephen Faulkner
Stephen Faulkner

Level 2 Expert

541 Answers

Jennifer Rock
Jennifer Rock

Level 2 Expert

105 Answers

xxxxxx xxx

Level 3 Expert

4679 Answers

Are you a Maclaren Baby Stroller Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides