U must let your cellphone dry up b4 u turn it on,1st thing to do dismantle your cellphone case then u can use a hair blower to dry it up. then try to turn it on. if its not working maybe your cellphone suffers a shortcercuit
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if its blank, like the phone is off, change batteries. but if its on with the keypad lights lit, but the screen is just black, try pressing the screen sides, see if the screen reacts. it can be that the ribbon needs replacement since this is a slide phone. best is to bring it to a technician though since that can be a hardware failure (lcd, ribbon. )
You most likely need a new ribbon cable, which is the cable that connects the two halves of the phone. They are not expensive and can be ordered on eBay, and they come with the tools required to disassemble the phone and replace the cable.
hello basicly the the liquid is the lcd that lays between the screen that gives you the display if this fluid escapes it will no longer display properly and as it leaks more display will be lost ,to solve you will need to replace the screen
I suspect the ribbon wire is the problem. It is the wire that connects the display to the main board where the keypad is. That explains why it would not display. Take your phone to an authorized technician and have its ribbon wire replaced. I hope this helps... ^_^