Question about Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

1 Answer

The pump has power but does not turn properly. I

The pump has power but does not turn properly. I manually turned it, and assisted in turning under power but it still drags. There does not appear to be any obstruction.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 142 Answers

Replace the pump its poss gone weak...

Posted on Sep 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My van is having a hard time turning, would this be the power steering pump going out and if so how can I fix my 1998 Mercury villager


It could be or the steering rack . The power steering system uses a CII type power steering pump (3A674) and a power rack and pinion steering gear.

If you never replaced either of these parts before suggest you take to a ASE certified repair shop .
Pump Flow and Pressure Tests Before performing pump flow and pressure test, complete the following checks for conditions which could cause loss of power assist. Take corrective action if necessary.
  1. Check power steering oil reservoir (3A697) for proper fluid level.
  1. Check tires for correct air pressure.
  1. Check drive belt (8620) for proper tension.
  1. Check power steering pump (3A674) for correct model and vehicle application.
  1. Check for correct size power steering pump pulleys (3A733) on power steering pump and engine.
  1. Check entire system for damage. Replace parts, if necessary.
If the above items are correct, or have been corrected, and the loss of assist still exists, test power steering pump flow and pressure to determine whether the trouble is in the power steering pump , power rack and pinion steering gear or hoses.

Oct 20, 2015 | Mercury Cars & Trucks

3 Answers

Cannot turn the wheel easily there'floid in tank but there does not seem to be any pressure this is a 2.4 and no belt


No belt? I think we found your problem. :) Ned what drives your alteernater, water pump, A/C, and power steering pump?

Jun 22, 2009 | 1998 Chevrolet Cavalier

3 Answers

Steering wheel will not turn with engine running and in drive


Since you did not list a year/model, I can only generalize and state that you have a failure with your power steering pump, such as loss of fluid, loose or broken v-belt (serpentine belt), or seized rack.

Sep 23, 2015 | Cars & Trucks

1 Answer

Why isnt my stratus turning properly


If you mean steering properly I can only speculate what your Stratus is doing.Steering related if it does not have power assist and turns hard sitting still try revving the motor slightly while turning the steering wheel if it feels like it turns easier then you may have a pump issue if it isn't easier then you still may have a pump or gear issue.If when driving it wanders you may have a suspension or steering component wear issue the same if it feels like it's binding while turning.These were common for outer tie rod ends wearing first as miles accumulate.

Apr 28, 2014 | 2006 Dodge Stratus Sedan

1 Answer

Not spraying water and solution


Tanks may be empty or not properly seated.
-Fill up the bladder with hot water and the solution tank with proper cleaning liquid.
-Remove and reseat both tanks

Pump may dry, needed to prime.
-Turn "off" power wait for about minute turn "on" power and depress spray trigger.

Check and clean filter on the deck (under the clean water tank, a red slotted plastic screw)

If nothing works you have to open the deck cover and go into details: check the pump, its a 12V DC motor, the solenoid, its a valve which operates with 120V, the hoses for broken or pinched part, the diode bridge (creates about 12V DC for the pump if the vacuum motor is turned "on" and the secret fuse (3,15A under the heat-shrink series to the diode bridge, if this one goes, no power to the pump!)

Mar 09, 2014 | Bissell ProHeat Pet Upright Deep Cleaner,...

2 Answers

Cant get fuel pump to work


There is also a fuse and a relay, both under the hood. You'll need your owners manual to find the locations (or web search). These cars are also common for bad fuel pumps. You should check for power at the connector near the fuel tank. It only primes for 2-5 seconds when you turn the key on, you will need an assistant to cylce the key. Wait 10 seconds between ignition cycles. The switch in the trunk is an inertia switch that usually only trips under hard impact, like an accident. They can go bad, but it's rare.

Dec 04, 2012 | 1999 Ford Taurus

2 Answers

2006 chevy hhr power steering its hard to turn? Can u tell me where to find the 60 amp fuse location under the hood fuse box?


THIS IS A DEALERSHIP FIX ELECTRIC POWER STEERING IS CONTROLLED BY POWER STEERING CONTROL MODULE.IT CONTROL BY INFORMATION SENSORS LIKE TORQUE SENSORS IN STEERING WHEELAND VECHICLE SPEED SENSOR IN WHICH SPEED WILL AID IN STEERING.YOU GO 10 MILES AN HOUR YOU WILL RECEIVE FULL POWER ASSIST.YOU GO 25 MILE HOUR POWER ASSIST REDUCED.THIS STEERING SYSTEM HAS TO BE HOOKED UP ON DIAGNOSTIC EQUIPMENT AT DEALERSHIP YOU CANT FIX AT HOME.YOUR OWNERS MANUAL IN GLOVE BOX HAS ALL FUSE AND RELAYS LOCATIONS.

Jun 19, 2010 | 2006 Chevrolet HHR

1 Answer

Ford focus power steering problem


Hi, it does sound like your on the right track as the noise gets louder when you turn the wheel. without turning the wheel you should have a slight noise that will get louder when you turn the wheel this would then point me to believ the power steering pump needs replacing.

As your not loosing any fluid then the rest of the steering should be ok so changing the pump will solve your problem, just remember to make sure you bleed the pump properly and the steering properly after fitting the new one as not doing this properly could cause damage to seals inside the rack itself causing more problems than you need so double check you have bled all the air out ok.

Let me know how you get on or if you need further assistance ok

Oct 11, 2009 | 2005 Ford Focus

2 Answers

Power steering


Support front wheels off ground. Chock rear tires, get an assistant for safty. Start engine (do not put in gear) step outside of car and manually turn wheels left and right by hand. Cut off engine. Turn key back to release steering lock. Manually turn wheels by hand again. If it requires the same ammount of strength to turn wheels, then Rack and Pinion is bypassing internally. Solution... replace rack & pinion.

Jul 02, 2008 | 1997 Buick LeSabre

Not finding what you are looking for?
Kenmore 16602 / 16604 / 16609 Built-in Dishwasher Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

Ken Johnston
Ken Johnston

Level 1 Expert

56 Answers

Fred Sops

Level 2 Expert

272 Answers

D. E. Hev

Level 3 Expert

1173 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...