Question about Office Equipment & Supplies

2 Answers

Heidelberg Linoscan 2650

Power button lights up on the front but no joy with the scanner, it doesn't initialise at all. Could it be the bulb or does it sound more serious?
Also If it sounds serious are the parts available to fix it?

Posted by on

  • 4 more comments 
  • sleh Jan 02, 2008

    My new FI-5530C does not initialise it always shows the letter P,Sometimes when it starts it shows the message error " the aad door is opened" wich is not true!!!

    my e-mai: Salaheddine.bouzaiane@edunet.tn

  • phildiver Apr 13, 2008

    HI
    thinking about buying one are common problem like bulbs and replacement film holders available?

    thanks
    phil
    philburley@ameritech.net

  • appleget Nov 26, 2008

    Canon FS4000US FIlm scanner - vuescan sees the scanner but when we insert film - or slide  it says no film is inserted is this a bulb or a film holder or something else.



  • r_nederveen Nov 17, 2014

    Does the scanner intitialize ? Goes the light carrier up and down ?

  • r_nederveen Nov 17, 2014

    Add a CommentI think that the scanner moter is defect. You can easely fix that problem, by remove it, and put some teflon oil in to the moter parts.

  • r_nederveen Nov 17, 2014

    Add a CommentMy scanner had the same problem.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

R_nederveen@hotmail.com

I have a Heidelberg Linoscan 1400 witch HAD diffent hardware problems, and no driver for Windows !
But I fixed ALL problems.

If you have a problem, mail me and I will try to help you.

Ralf.

Posted on Mar 29, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

HI again
Polaroid SprintSan 120 film scanner is what I'm asking about.
phil

Posted on Apr 13, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Heidelberg 2650 Linoscan scanner and XP


There is no solution to this issue, Linoscan 2650 won't run in a PC, not even in a Mac without OS9, period.

Mar 23, 2013 | Office Equipment & Supplies

2 Answers

Scanning lines


Check this link for a bit of info about the scanner. http://www.hwkb.com/Uwe/Forum.aspx/scanner/973/Heidelberg-Linoscan-1450-sparepart-and-driver-for-Windows I agree: Heidelberg no longer support the model so you will have a lot of trouble finding spares - I searched a lot and the only place you can find these now seems to be e-bay. I would be tempted to say get a new scanner, but it is just possible that replacing the lamp if you could get one or cleaning the inside may help, but a scanner usually only has a few years life in it. Just possible the lamp is standard, if you can get to it and get a part number from it, perhaps we could find one online. Hope this helps :)

Jul 03, 2007 | Heidelberg Linoscan 1450 Flatbed Scanner

1 Answer

I need updated drivers


check out Hamrick Vuescan. they have drivers for almost every scanner made. http://www.hamrick.com

Sep 13, 2011 | Heidelberg Linoscan 2200 Flatbed Scanner

1 Answer

I look for linoscan 1400 driver!


http://www.howtodrivers.com/model543456.html
you will have to enter that number code ...its a robot prevention ...good luck and please rate me .....I really need votes..

Jun 06, 2009 | Heidelberg Linoscan 1400 Flatbed Scanner

3 Answers

Heidelberg 2650 Linoscan scanner and XP


Hi - You need to install a driver for XP, you can find it on the following link:

Heidelberg 2650 Linoscan

Good Luck!

Jul 03, 2008 | Heidelberg Linocolor Saphir HiRes Flatbed...

1 Answer

1450 model with firewire only connection


Have you changed computer recently to XP or Vista

Dec 26, 2007 | Heidelberg Linoscan 1400 Flatbed Scanner

1 Answer

Linoscan manual


Setup is easy just plug in the cable in to the scanner and the other end of the cable plugs in to the back of the computer and make sure your computer is off. After you plugged them both in, plug in your power supply for your scanner then turn on your computer and it should do the rest.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/stephen_171aeeebef53a898

Nov 01, 2007 | Heidelberg Linoscan 1400 Flatbed Scanner

2 Answers

Mac OS X software for my Heidelberg 1450 Firewire scanner ???


Try vuescan it say it works with your scanner http://www.hamrick.com/ it costs money but has a free trial

May 11, 2007 | Heidelberg Linoscan 1450 Flatbed Scanner

Not finding what you are looking for?

Open Questions:

0 Answers

ricoh aficio sp C232SF / c231sf When enabled, initializes but does not print Ricoh Aficio SP C232SF / c231sf The situation is. When enabled is initialized, writes that greeedy and is in readiness. No mechanism at this time does not work, except the scanner line. Scanning Starts, black and white is faster than the ruler, the color is slow. The document feeder works off a sheet and hands. After all the manipulations on the display Processig shines indefinitely no mechanism works until you press stop. The same situation when you try to print reports or when sending to print from a computer. the driver stood on the USB bus. Using command center see it all, but printing is also not achieved. Sees the tray and the presence of paper. Now this is the strange print though, and no, the black toner decreases. Already there was an inscription about it on the display and in commands the center shows the decrease in black. Only black. If you press for example copying, will stand and-writes about the heating of the stove no mechanical work and after a couple of seconds is ready. Stove at this time safely lying on the table next to the machine. the line Lamp is normal, but no power is supplied to it. The power supply did not find any problems. In the service you start the registration-work out the engines of development and tape, and a couple of auxiliary. Tried to make init EEPROMy, tried to rewrite the data in it, as if installing a new one-no changes Any ideas and assumptions are accepted And for dessert - a main Board, engine and the controller changed. The situation is quite similar. Sew and successfully both through the grid and through the USB port. I don't know where to look

Sep 23, 2018 | Ricoh Office Equipment & Supplies

Office Equipment & Supplies Logo

Related Topics:

604 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8080 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

Marvin
Marvin

Level 3 Expert

82322 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...