Question about Magellan Maestro 4040 GPS Receiver

1 Answer

My 5310 goes to the "System Settings"

On boot-up my Maestro 5310 goes to the "System Settings" screen and will not go back to the main screen. I tried holding the reset button and also the power button for a reset. I tried to update the firmware, but it will not accept it! Any HELP... Thanks

Posted by on

  • kazi-hotmail May 11, 2010

    Perhaps I can help. Please directly email me the steps you have taken until you got stuck. My email is kazi at hotmail dot com.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,111 Answers

Not sure how you tried the rest, but try turning the 5310 on and then hold the power button for 15 seconds, then start it again... if that fails, turn it on and press and hold the reset for 15 seconds.


if it works, try and update it again!

if neither of those work, its possible the digitizer (touch part of the screen) is out on it.

if its under warranty, send it back. this is a know problem with this model but most times it will reset and work fine.

bill

Posted on Sep 28, 2009

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
vickygomar
  • 460 Answers

SOURCE: Maestro 4040 wouldnt not boot up

hOPE THIS WORK FOR U

copy n paste

http://www.magellangps.com/products/map.asp?tab=0&PRODID=2156

"Did it solve your

Posted on May 08, 2009

  • 1111 Answers

SOURCE: Firmware Update 4.86 failed in mid-update. Maestro

try and run the firmware update again. make sure the its fully charged or plugged in. this usually works though sometimes it wont depending on what files are missing..they are other ways to fix this problem, but i recommend you call magellan to get it fixed. they will repair any of their gps that were rendered inoperable do to there updates.

you can go here to contact magellan support

591eb53.gif


Posted on Jul 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Magellan Maestro 5310 is stuck on the Magellan start up screen. the little power bar on the the bottom of screen comes up then thats it. It won;t begin to load the next screen. I have tried to reset...


Hello There, I have a Magellan myself, besides me knowing some things or two about GPS'S

Give this a try, seems to work for me and others most the time.


Try this for me to see if this works: Let me know. It needs to be rebooted. Turn off, by holding off button down. Then once it is completely off, then turn it on, BUT when you go to turn it on, keep on button depressed, all the way until it turns on and then some for about 15 seconds, now you just rebooted system. Let me know, if does work, please click on the thumbs up to showed your a happy customer. Thanks Mike
mc1bean_12.jpg

Jun 22, 2011 | Magellan Maestro 5310 Car GPS Receiver

1 Answer

I have had to reset my magellan maestro 5310, but now cannot get passed the system settings and system status pages. I think I have to download something to get it back up and running but not sure where to...


Hi tedmare1

you can download the 4.72 update for your 5310 HERE but follow the directions to the
letter or it will render it inoperable...read all the instructions aftrer downloading and before you
run the update.

make sure either the battery is fully charged, or you have it plugged in to the home charger
NOTE: the usb cord will not charge a magellan 5310, so you need to use the home charger or
fully charge it woth the car charger before starting...if the download is interupted for any reason,
the update will fail and the 5310 will not fully boot.

you might have to register your 5310 with the site before downloading (you used to ) but maybe not since they changed their site within the last few days.

let me know if you need more help or info

Bill
EX f31817b.gif

Standing Member of G.O.T.

Nov 15, 2010 | Magellan Maestro 5310 Car GPS Receiver

3 Answers

I want to change the battery in my Magellan Maestro 5310. Removed the four obvious screws but the unit will not come apart. Any tricks?


use your finger nail and press and slide it along the seem where the front and back meet..there are at least 2 snaps on each side of the gps...start opposite the power port side or you can break it off..let that side for last!


bill

Dec 29, 2009 | Magellan Maestro 5310 Car GPS Receiver

2 Answers

Magellan maestro 5310. when pluging in th power


yes it can be fixed


you can go here for help


the following magellan 2000, 2200t, 2500, 3000, 3100, 3140, 4000, 4040, 4050, 5310 and the 6000 are known to have faulty dc connectors...if your magellan gps is not charging or will not power up, its most likely the dc power port...

you can get it repaired, here
or buy the port here

if you need further help, just let me know.

bill 8ca7cd3.gif

Oct 15, 2009 | GPS

1 Answer

Give me exact the the serial number of my GPS magellan maestro 5310. because, this is the mark of the back 0764200585919. And I cannot able to enter.


your exact serial number can be found inside the unit in the product information section..on the main screen, tap the menu tab, then scroll ove to the options tab, the system tab, then scroll to the next page..there should be a product info and diagnostic tab..your serial number will be listed in the product tab.

good luck

bill

Jul 27, 2009 | Magellan Maestro 5310 Car GPS Receiver

1 Answer

My magellan 3225 turns on, and goes to the system settings page, I cannot get to the main menu. I can go through all of the system settings but that is it


Is your GPS still stuck at the boot screen? Perhaps I can help. Please email me the detailed steps you have taken until you got stuck. My email is kazi at hotmail dot com.

Mar 26, 2009 | Magellan Maestro 3250 GPS

1 Answer

Magellan maestro 4250


I would take it back and ask them to replace/refund.

Mar 01, 2017 | GPS

1 Answer

Troubleshooting


When the Maestro is on hold the on off switch for 15 seconds. This will reset the unit. Turn it back on and it should be ok. Worked for me so far.

Aug 26, 2008 | Magellan Maestro 4250 GPS

Not finding what you are looking for?
Magellan Maestro 4040 GPS Receiver Logo

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magellan GPS Experts

Jungle Ghost
Jungle Ghost

Level 2 Expert

154 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

The Knight
The Knight

Level 3 Expert

74243 Answers

Are you a Magellan GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...