Question about Juki Sewing Machines

1 Answer

I have a Juki LU-562 sewing machine I was sewing thick leather it made this clunk noise and a spring flew out of it underneth it now the hook just turns and it doesn't sew.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Like most of the older sewing machines, the lu-562 is usually an easy fix when it comes to issues of timing and even broken parts. First determine where the spring came from and that should point you to the parts that need replacing and/or readjusting. But, by all means DO NOT continue operating the machine until its fixed. Without actually seeing the machine, it sounds as if the needle bar spring failed.

Posted on Feb 28, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Have a Juki 8700 what type of needle do I need to sew leather? Also what kind of leather have a Juki 8700 what type of needle do I need to sew leather? Also what kind of leather foot do I need?foot do I...


hi there
regarding your inquiry about JUKI machine model DDL-8700 , first your machine type was what ? DDL-8700/SS ( for light to medium material , DDL-8700/HS ( for jeans and can use to sew light to medium lather, type of needle is DBx1, size for lather was 18 and you can use thread number #30 and #20. one more thing you want to change your presser foot to teflon presser foot ( please see attached photo for that presser foot you want to buy.
if need more information please ask
thanks and best regards
ASHRAF ABOZID
CAIRO - EGYPT
aabozid@hotmail.com

box-da0wjbenhfzuqxk3opquw5yj-5-0.jpg

box-da0wjbenhfzuqxk3opquw5yj-5-2.jpg

Mar 07, 2015 | Juki DDL-8700

1 Answer

Juki LU-562 I heard a clunck and the bottom walking foot doesn't work right .


Hello, I have a different model Juki but it sounds to me that your safety clutch has been tripped. The safety clutch functions when an excessive load is applied to the hook or the other components during sewing. At this time, the hook will not rotate even if turning the handwheel. When the safety clutch has functioned, remove the cause and reset the safety clutch by pressing and holding the push button on the top surface of the machine bed, while strongly turning the handwheel in the reverse direction of rotation. The resetting procedure is completed when the handwheel clicks.

Jan 07, 2014 | Juki Sewing Machines

1 Answer

I need a manual for Juki LU-1508 sewing machine. Can any one help?


contact a juki dealer about a manual
email these sites about a manual
sewingpartsonline.com
sewusa.com
sewvacdoctor.com
a1sewingmachines.com
sewingmachines.com

May 17, 2012 | Juki Sewing Machines

1 Answer

How to put Lu-562 back in timing


try youtube or ehow
sewusa.com

Apr 15, 2012 | Juki Sewing Machines

1 Answer

Does the Juki DL-555 sew leather?


ordinary drop feeds are not suited for sewing leather,ideally a needle feed or machine with a walking foot mechanism is best suited.if you are stuck with this machine only,there are a couple of things which may help.on some of the juki ddls there is an adjusting screw and locknut on top and in the middle of the arm of the machine .turn needle by hand wheel to bdc and loosen this screw and turn clockwise slowley! this will raise the presser foot very slightly,so when the feed dog is at tdc it can improve the feeding . spear point needles are reccommended also. one other idea,but you need a qualified mechanic to do this is to alter the feed timimg slightly on the eccentric on the top shaft.as the needle is entering the fabric,slow the timing down so the needle enters the leather just as the material starts to move. hope this helps! cheers kev w 07725903110

Feb 23, 2009 | Juki MO-644D Mechanical Sewing Machine

4 Answers

Looking for a manual


JUKI HOME SEWING DIVISION 8500 NW 17 th Street Miami, FL 33126 Phone: (305) 594-0059 ingrid@juki.com she will send you one

Mar 25, 2008 | Yamata FY700 Mechanical Sewing Machine

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

562 people viewed this question

Ask a Question

Usually answered in minutes!

Top Juki Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1128 Answers

Pete Alaniz

Level 1 Expert

13 Answers

SewTechWayne
SewTechWayne

Level 2 Expert

186 Answers

Are you a Juki Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...