Question about Edison Toys

Open Question

Looking for parts to fix an edison giocattoli double barrel shotgun. It's a cap gun. Need to describe the parts of this gun in order to get parts

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 23 Answers

SOURCE: i need to know how to assemble a remington 870 shotgun

The bolt has to go into the reciever form the front. It is inserted with the dog. This is a pain, but the bolt, dog, and action arms(from the pump) have to come together and be held just right to slide into place.

Posted on Aug 25, 2009

Ad
agent91
  • 2100 Answers

SOURCE: I have an old H&R1871 Topper shotgun patened in feb

Yes you can, those old shotguns were pretty much all the same, a lot of the parts interchange, but go to gunparts.com, they have everything there, if not, find Jackfirst, He has a ton of stuff. I have the same gun right here that was my fathers, bought in 1913 for $13, almost 100 years old!!!

Posted on Mar 03, 2010

  • 231 Answers

SOURCE: we are trying to figure out when are great

Check out this post at shotgun world...

http://www.shotgunworld.com/bbs/viewtopic.php?t=21196

Posted on Mar 25, 2010

HondaCRX
  • 252 Answers

SOURCE: browning shotgun sweet sixteen age and value

In general, a 1950s Sweet Sixteen is a valuable gun. Measure the distance from the trigger to the end of the **** stock to get the "legnth of pull" (LOP). this was 14 1/14 " when it left the factory. If it is shorter, the value will be less.

Without seeing it, although many have been altered which would bring a price $350 - $450 area.

This guide might help if you can determine the condition : OS is 1958.
AUTO-5 SWEET 16
- 16 ga., 2 9/16 in. chamber from 1937-1940, and 2 3/4 in. chamber from 1947-1975, similar configuration to Lightweight, 12 and 20 ga., gold plated trigger, 10 oz. lighter than Standardweight Model 16 ga., 1937-1940 mfg. Sweet Sixteens were available in pre-war Grades I, III, and IV. Mfg. 1937-1975 by F.N.

Grading ...............98% ....95% ....90% ........80% ........70%
Plain Barrel .......$950 ...$825 .......$725...... $625 .......$500
Solid Matte Rib $1,300 .$1,075 ....$950 .......$825 .......$700
Vent. Rib .........$2,100 .$1,650 .....$1,225 ...$1,050 ....$875

Subtract 20% for front safety.
Subtract 20% for 2 9/16 in. chamber.

Posted on Jun 25, 2010

  • 643 Answers

SOURCE: Need parts for winchester model 12 shotgun

The following website carries all the parts for the model 12

http://www.nulineguns.com/category_part_42_3_31_42.php

Posted on Oct 16, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Barrel for 410 shotgun


See if this site has what you need. If they don't, it's probably not available. Not saying it can't be fixed by a gunsmith, just it won't be easy or cheap if a ready made replacement is not available.



Firearm Parts Accessories Military Surplus Numrich Gun Parts

Sep 22, 2017 | Optics

1 Answer

I need a forend for a stevens double barrrel model 225


Stevens Shotgun Parts ' eBay

www.ebay.com > ... > Hunting > Gun Parts > Shotgun Parts > Stevens Shotgun Parts
Rating: 4 - ‎7 reviews
Results in Stevens Shotgun Parts ... Double Barrel 30" Side By Side Shotgun Barrel ... Stevens Savage Arms Model 77B 12-ga shotgun parts, trigger assembly.

Savage/Stevens/Springfield/Fox - Numrich Gun Parts

https://www.gunpartscorp.com > Manufacturers Need gun parts and accessories for SAV/STEV/SPGFLD? Look no further, Numrich has everything you need right here for SAV/STEV/SPGFLD.

225 DBL BARREL Accessories ' Numrich Gun Parts

www.gunpartscorp.com > Categories > Savage/Stevens/Springfield/Fox ManufacturerSTEVENS, Model225 DOUBLE BARREL, 325 DOUBLE BARREL, Product #995740, DescriptionFiring Pin, Price$24.85, Add To CartSold Out.

Savage Shotgun Parts, Stevens Shotgun Parts,Springfield Shotgun ...

www.gun-parts.com/savageshotgun/ ... Barrel Shoptgun Parts, Stevens Shotgun Barrels, Stevens Double Barrel Shotgun ... many Contract Gun Models. ..... #14 Bolt 340/840 30-30 or 225 5 Rd..

Shotgunworld.com - Find your shotgun parts here.

www.shotgunworld.com/parts.html Poppert's, Remington, Browning, Mossberg,Stevens,Winchester and L.C. Smith firing ... Remington, Mossberg, etc, Gun-Parts.com, Gun Parts for over 350 Models .... DOUBLE-BARRELED - A gun consisting of two barrels joined either side by ...
stevens double barrrel model 225 Google Search

Mar 06, 2017 | Optics

1 Answer

D669090 is the serial # of my Stevens 79 pump gun 30 barrel wanting to know the year it was made.


Have a read of these articles.

I Have Stevens Modle 79 Shotgun And Would Like To Know Rough ...

www.gunvaluesboard.com/i-have-stevens-modle-79-shotgun-and-would-like-to-kno...
  1. Cached
  2. Similar
I have Stevens Modle 79 shotgun and would like to know rough. ... hello,,your stevens model 79 pumpgun would be worth roughly around ... Serial number .

The Gun Digest Book of Exploded Gun Drawings: 975 Isometric Views

https://books.google.ca/books?isbn=0896891410 Harold Murtz - 2005 - ‎Antiques & Collectibles 845 Model 79-T Slide-Action Shotgun 845 Model 99 Lever-Action Rifle 846 ... 99C Lever-Action Rifle 847 Model 99C Series A Lever-Action Rifle (Serial No. ... Rifle 850 SAVAGE/STEVENS Model 89 Lever-Action Rifle 851 Model 94C Series M ...

Stevens 79 Shotgun Manufacture Date? - FirearmsTalk.com

www.firearmstalk.com > ... > Long Guns > General Shotgun Discussion
  1. Cached
May 19, 2011 - Twelve years ago I purchased a Stevens model 79 pump 12 gauge shotgun with a 30" barrel used. The serial # is 0982XXX. Does anyone ...

Stevens 79 Manufacture Date? - Long Range Hunting Online Magazine

www.longrangehunting.com > ... > Shotguns And Shotgunning (NOT Slugs)
  1. Cached
May 26, 2011 - 1 post - ‎1 author Twelve years ago I purchased a second hand Stevens model 79 pump 12 gauge shotgun with a 30" barrel and full choke. The serial # is ...

Nov 23, 2016 | The Optics

1 Answer

I have h&r 20 gauge pump shot gun 1871 wanting to know if there is a slugbarrel for it


H&R Pardner® Pump - H&R 1871

www.hr1871.com/firearms/shotguns/pardnerpump.asp
  1. Cached
  2. Similar
This extremely versatile shotgun has an American walnut stock, ventilated recoil pad, chrome-plated ... 20 Gauge (NP1-206) Order Online From Gallery of Guns.

There are various barrel options including slug barrels.
20 gauge pump shot gun 1871 Google Search

Oct 30, 2016 | Optics

1 Answer

Anything you can tell me about Winchester Model 97 Ser# 201413. when it was made and value.


The Winchester Model 1897 evolved from the Winchester Model 1893. The Model 1897 and 1893 were both designed by John Browning. The Model 1897 is an external hammer shotgun lacking a trigger disconnector. This means that the user can hold the trigger down while cycling the shotgun and once the action is returned to battery the gun fires. The gun itself is classified as a slide action pump shotgun. It was the first truly successful pump-action shotgun produced. Throughout the time period the Model 1897 was in production, over a million of the type were produced in various grades and barrel lengths. 16-gauge guns had a standard barrel length of 28 inches, while 12-gauge guns were furnished with 30-inch length barrels. Special length barrels could be ordered in lengths as short as 20 inches, and as long as 36 inches. Along with various grades and barrel lengths, the Model 1897 came in two different chamberings. One was the 12 gauge and the other was the 16 gauge. The shells should be of the 2-¾ inch or 2-? inch model. Any shells larger are not recommended. An average Model 1897 held 5 shotgun shells in the magazine tube. After including the one shell that could be held in the chamber, the average Model 1897 held a total of 6 shotgun shells. However, this would vary from grade to grade. When working the action of the Model 1897 the forend (fore grip) is pulled back, forcing the breech bolt to the rear which extracts and then ejects the spent shell while simultaneously cocking the external hammer by pushing it to the rear. When the forend is slid forward again, the breech bolt pushes a fresh shell into the gun's chamber and locks into place. This action of sliding the forend back and forth (pumping) is why the gun is classified as a slide action (or pump) gun.

Oct 23, 2016 | Winchester Optics

1 Answer

I have an L C SMITH double barrel 12ga shotgun serial # fw 36102 what year was made?


Local gun shop has reference book that will tell you the needed information

Nov 28, 2014 | Smith Cycling

2 Answers

Gunparts com


The problem with your question is you omitted what MAKE/MODEL shotgun it is!
Not even what type (single break open, double barrel, pump, etc)!

May 17, 2014 | Optics

1 Answer

How old is my remington double barrel shotgun-serial number-18000


Dear Armstrong.

GO to the NRA serialization document's offered in the following link. It offers a variety of weapons manufacturers with detailed coding in a chart line item method. Here is the link. http://www.nramuseum.org/media/940941/serialization-date%20of%20manufacture.pdf .


Along with that is offered a sample of the stamping of information on the barrel for your convenience.

http://www.remingtonsociety.com/questions/BarrelCodes.jpg


Remington Dates of Manufacture

Blue book of gun values at this link.

Blue Book of Gun Values REMINGTON ARMS COMPANY INC HANDGUNS 1857 1945...


Fare. Well.

Jan 06, 2013 | Remington Sports Remington 12 Ga...

1 Answer

I bought a Remington 870 at Christmas time. The first time i shot it the shells are jamming in the gun. I took it home cleaned it and oiled it real good. Went and shot it again same problem. Either...


If the 870 is a Magnum model it should accept 3" shells. After making absolutely sure you have an unloaded shotgun, both chamber and magazine are empty, empty, empty, proceed with these few checks.

Assuming it may be a 2 3/4' model, have you double checked on the left side of the barrel near the receiver? There will be gauge and shell length stampings on the barrel. If you are jamming 3" shells in to a 2 3/4" shotgun you will get jams as you describe. Look at the empty shell casings if you have any and see if the shell appears to be damaged from the chambered and firing process. This could also indicate you have a improper shell length issue.
If you are shooting reloaded ammo make sure it has been properly re-sized, crimped and reloaded.
sloppy reloading of shotgun shells can cause jams as you describe. Improperly re-loaded shells can also cause leaks of bb's, (shot) in to the receiver and bore area.

Check for a loose bb. or bb's, (shot) in the receiver and chamber area. A lodged bb. in these areas will cause problems you have described.

Run your fingers along the barrel and visually check it for any slight bulge. If you detect or suspect a bulge do not shoot or load the shotgun until a gunsmith or the factory check the barrel thoroughly. If someone had loaded a 20, 16 or similar smaller guage shell in the chamber by accident and the gun was fired it will usually cause at minimum a stressed and bulged barrel. Many times a slight bulge in the barrel may not be visually obvious.

Most of the time if a 12 gauge shell gets loaded behind that one and fired you will have catastrophic failures, i.e. the gun can blow up and cause serious harm, blindness or even death in rare cases to the shooter. Shooters call this a "20/12" catastrophic failure. This type of accident is not to be taken lightly! this is why shotgun shells of different gauges are different in color normally.
Never ever, mix shotgun gauge shells in a pouch or box.

If you pump the shotgun too easily, (i.e. wimpy) it can jam up. Always pump, "rack" a shotgun with vigor. I'm not suggesting abusive action, just don't be slow or overly gentle with the pump action that ejects a shell and reloads the next one. Something related to this is if your action/slide bar is out of alignment or has become torqued out of it's proper alignment this will cause problems as you have mentioned. The action/slide bar is a long single piece of flat metal that is in alignment with the barrel and is attached to the front forearm of the shotgun. This is the flat piece of metal that actually makes the action open and close as you pump the shotgun. There is one on the left underside of the bore and forearm of the shotgun. When you pump the action you will easily observe it moving with your pumping action.

Check how the empty action feels to you. While dry-firing, (using an unloaded shotgun), does the action feel smooth or perhaps, gritty, sluggish, overly tight? If any of the later the you need to double check for debris, shot, excessive old lubrication, gumming of the action, a bent action/slide bar, etc. A normal 870 has a very smooth action.

Also, check the bore for any obvious nicks or obstructions that don't belong there. A good quality shotgun such as your 870 should operate best with very little lubrication. Excessive lubrication over time can cause gumming up of the receiver area. Also, improper lubrication products. Improper lubrication can cause problems you have described.

I am not a gun smith. I am simply an avid gun enthusiast. If you have any doubts as to anything that you observe while performing these basic checks on your shotgun, I strongly advise you to call the factory or take it to a local gun smith. Many gun shops will give your shotgun a courtesy check over and if you don't find a solution, many times they will within a few minutes. Do not be embarrassed to take the gun in to a gunsmith! Trust me, they will most likely treat you and you gun with respect and courtesy. Otherwise they won't be in business much longer.
If the gun shop fixes your problem make sure and purchase some shells and perhaps something else from them. We must support our small business firearms dealers and gun smiths

Hope this helps you!

Feb 02, 2011 | Remington Shotgun Mount 12Ga Lh, B Square...

Not finding what you are looking for?
Toys Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Edison Toys Experts

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

16124 Answers

Are you an Edison Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...