- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if you want to change paper size for copier you should going to user mode then change casset paper size but if you need to change paper size for printer mode and i guess you mean's that you should go to printer properties then select advance then click printing default then change paper size then click apply then ok
Hi, thats is a mode switch and mechanism
alignement problem;;; if you turn manually
loading motor belt vcr unpluged until the cassette
housing is in loading position dont put a tape in,,
plug it again the cassette housing should go back in eject position thats is a good way to verify the mechanism. then try first to replace the loading belt
the idler wheel and the capstan belt then try to insert
a tape in if it doesnt work you wil have to clean the mode switch and verify the mechanism alignement
if you not sure or not familiar about this process
you can hask a friend who you know he is familiar whit this or see a repair shop its a 30 minute job
hope that will help you
have a nice day
Do you see any error number on LCD such as C32:11
1) It could be the Digital 8 tape is at the end set the unit on VTR mode then rewin the tape
2) The tab for record protection is on that mean the red tab at the right hand side full red indicated SAVE just turn to REC position in this case you can try on VTR mode it should work
"safeguard mode" indicates a hard failure, normally associated with the mechanism. Try ejecting the tape if one is in the unit. Do not force the mechanism open as it will cost more have the cam repaired. If tape is defective and can be removed, try using a cleaning tape first, then a known good tape.
the only way i have been able to get around this was to clean the insides with denatured alchohol the ethyl and methyl only,or the plastics may melt so check the ingredients it in the paint section.Then turn it off and on and off and on until it works, for me on average 6 or 7 times. I can only pull off the still pics though it isn't reliable enough for me to record. also mine has a thing for eating my tapes. But if you have old tapes you can atleast save pics or movie to your computer.