Question about GE Refrigerators

1 Answer

Freezer stopped making ice cubes

My freezer stopped making ice cubes. The ice maker is on, the water dispenser works, but there isn't any water in the ice cube tray. Does anyone know why?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GE Master
  • 1,606 Answers

Pour about 2/3 cup of water into the ice maker . If it dumps , then replace the dual water valve behind the refrig . If it does not dump the frozen cubes , replace the ice maker .

Posted on Sep 27, 2009

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 142 Answers

SOURCE: water dispenser on front of refrigerator door does not dispense water. Ice Cube maker continues to make ice cubes. Defrosting doesn't fix problem.

Water dispensing solenoid is bad. You need to replace the solenoid valve. This typically is independent of the ice maker.

Posted on Jun 02, 2009

  • 489 Answers

SOURCE: Ice Maker Freezing Up and Ice not dispensing

Sounds like the water valve has a small leak and continuously drips water onto the icemaker.  Have the water valve checked and if necessary, replaced.

Posted on Apr 27, 2008

aasc
  • 1606 Answers

SOURCE: Maytag ice maker will not release cubes

Sounds like it has a " seeping " water valve . Only thing to do is replace the water inlet valve . There is a certain amount of water to go into icemaker at fill . A seeping valve will let water continually drip into icemaker , making large cubes which icemaker cannot dump . A larger amount of seeping , will overfill the icemaker , and drip into the freezer and floor .

Posted on Aug 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ice maker


Before going to buy any parts directly.
Go through this troubleshooting help links.

-------------------------

This is list of refrigerator problems, which is normally faced in refrigerator.
You can go through the details, by clicking the link below:---

--------------
Refrigerator is not cooling properly?
http://technoanswers.blogspot.com/2011/06/refrigerator-is-not-cooling-properly.html
-----------
Both refrigerator and freezer not cooling properly in refrigerator?
http://technoanswers.blogspot.com/2011/06/both-refrigerator-and-freezer-not.html
----------
The ice maker not working: ---
http://technoanswers.blogspot.com/2011/06/ice-maker-stopped-working.html

------------
Compressor not running on refrigerator?
http://technoanswers.blogspot.com/2011/10/compressor-not-running-on-refrigerator.html
--------
Water dispenser not working on refrigerator?
http://technoanswers.blogspot.com/2011/10/water-dispenser-not-working-on_19.html

-------------

Ice maker stopped making ice?

http://alltypesofpartsreplacing.blogspot.com/2011/10/ice-maker-stopped-making-ice.html

-------------

Water Overflows in Ice maker and freezes inside?

http://alltypesofpartsreplacing.blogspot.com/2011/10/water-overflows-in-ice-maker-and.html

-------------

How to replace Ice maker assembly?

http://alltypesofpartsreplacing.blogspot.com/2011/10/how-to-replace-ice-maker-assembly.html

other ice maker related issues and solutions:---


===========


Ice maker dispensing ice with black or white plastic pieces in ice?


http://alltypesofpartsreplacing.blogspot.com/2011/10/ice-maker-dispensing-ice-with-black-or.html


After replacing ice maker assembly, ice is not getting made?

http://alltypesofpartsreplacing.blogspot.com/2011/10/after-replacing-ice-maker-assembly-ice.html


Ice maker is leaking water and causing the ice to freeze?

http://alltypesofpartsreplacing.blogspot.com/2011/10/ice-maker-is-leaking-water-and-causing.html


Ice maker is noisy and not making ice?

http://alltypesofpartsreplacing.blogspot.com/2011/10/ice-maker-is-noisy-and-not-making-ice.html


Refrigerator ice maker stopped making ice?

http://alltypesofpartsreplacing.blogspot.com/2011/10/refrigerator-ice-maker-stopped-making.html


Ice maker leaks water into ice bin causing a glob of ice?

http://alltypesofpartsreplacing.blogspot.com/2011/10/ice-maker-leaks-water-into-ice-bin.html


Amana Refrigerator leaking water from ice maker?

http://alltypesofpartsreplacing.blogspot.com/2011/10/amana-refrigerator-leaking-water-from.html


Ice maker leaking?

http://alltypesofpartsreplacing.blogspot.com/2011/10/ice-maker-leaking.html


Ice maker is dumping the ice cubes out before frozen solid.

http://alltypesofpartsreplacing.blogspot.com/2011/10/ice-maker-is-dumping-ice-cubes-out.html

Water overflowing ice maker?

http://alltypesofpartsreplacing.blogspot.com/2011/10/water-overflowing-ice-maker.html


Ice cube is getting stuck up hard in ice maker

http://alltypesofpartsreplacing.blogspot.com/2011/10/ice-cube-is-getting-stuck-up-hard-in.html


Icemaker quit working?

http://alltypesofpartsreplacing.blogspot.com/2011/10/icemaker-quit-working.html


Quit making ice

http://alltypesofpartsreplacing.blogspot.com/2011/10/quit-making-ice.html


Water leaking into ice tray, frozen glob of ice

http://alltypesofpartsreplacing.blogspot.com/2011/10/water-leaking-into-ice-tray-frozen-glob.html


Not making ice, and water leaking in freezer?

http://alltypesofpartsreplacing.blogspot.com/2011/10/not-making-ice-and-water-leaking-in.html


The ice maker stopped making ice?

http://alltypesofpartsreplacing.blogspot.com/2011/10/ice-maker-stopped-making-ice_20.html


Ice maker not making ice?

http://alltypesofpartsreplacing.blogspot.com/2011/10/ice-maker-not-making-ice.html


Ice maker quit working?

http://alltypesofpartsreplacing.blogspot.com/2011/10/ice-maker-quit-working.html


Ice maker dispensing black pieces of plastic in the ice?

http://alltypesofpartsreplacing.blogspot.com/2011/10/ice-maker-dispensing-black-pieces-of.html


Replaced Ice maker but its still not making ice?

http://alltypesofpartsreplacing.blogspot.com/2011/10/replaced-ice-maker-but-its-still-not.html


Ice maker leaked creating an ice block?

http://alltypesofpartsreplacing.blogspot.com/2011/10/ice-maker-leaked-creating-ice-block.html


Ice tray leaked?

http://alltypesofpartsreplacing.blogspot.com/2011/10/ice-tray-leaked.html


Ice maker stopped functioning?

http://alltypesofpartsreplacing.blogspot.com/2011/10/ice-maker-stopped-functioning.html


Ice maker stop working?

http://alltypesofpartsreplacing.blogspot.com/2011/10/ice-maker-stop-working.html


Ice maker failed

http://alltypesofpartsreplacing.blogspot.com/2011/10/ice-maker-failed.html


Old ice maker stopped working?

http://alltypesofpartsreplacing.blogspot.com/2011/10/old-ice-maker-stopped-working.html


Old ice maker started leaking?

http://alltypesofpartsreplacing.blogspot.com/2011/10/old-ice-maker-started-leaking.html


Ice maker not working?

http://alltypesofpartsreplacing.blogspot.com/2011/10/ice-maker-not-working.html


Ice maker overfills and cause water to flow into ice dispenser and freezes?

http://alltypesofpartsreplacing.blogspot.com/2011/10/ice-maker-overfills-and-cause-water-to.html


Ice maker didn't make ice?

http://alltypesofpartsreplacing.blogspot.com/2011/10/ice-maker-didnt-make-ice.html

Ice maker was leaking?

http://alltypesofpartsreplacing.blogspot.com/2011/10/ice-maker-was-leaking.html


Ice maker was leaking after it filled up with water?

http://alltypesofpartsreplacing.blogspot.com/2011/10/ice-maker-was-leaking-after-it-filled.html

These will help.

Thanks,.

Dec 21, 2012 | LG LFX25976ST - 3-Door French Door...

1 Answer

Ice maker stopped dispensing


Refrigerator - Icemaker Not Dispensing,or Not Making Ice Check that the feeler arm on the icemaker is in the down position and is not blocked. If the icemaker does not have a feeler arm make sure the icemaker paddle is not blocked under the icemaker. For more information on the causes of new icemakers not making ice. For more information on normal ice production. Side by Side models: The filter may be loaded with sediment that can cause low water pressure. The water pressure must be between 40 and 120 psi. Pressures below 40 psi may cause a malfunction of the icemaker (i.e. producing hollow cubes or no ice production). Test the water pressure: Dispense water from the dispenser into a large measuring cup for 20 seconds. If the measuring cup contains less than 13.5 ounces (400 metric centimeters), the water flow is inadequate. If the amount of water is less than 13.5 ounces then the refrigerator fails the test, remove the filter and test the refrigerator again with the by-pass plug in place. If the refrigerator dispenses the proper amount of water with the by-pass plug in place, then the filter should be replaced. If you no longer have the by-pass plug and it has been over three months since the filter has been replaced, you should replace the filter. If the refrigerator fails the test again and you know you have the proper water pressure in your home, you should call service to check the refrigerator. If the amount of water collected is over 13.5 ounces then the refrigerator passes the test and the dispenser is working correctly. Ice not Dispensing Due To Clumping Ice: Your dispenser may not be dispensing due to clumping ice cubes. The ice cubes in your icemaker may be clumping for a couple of reasons: Low food load: The defrost cycle radiates heat into the freezer. The ice in the freezer will naturally absorb the heat. This will cause the ice to melt slightly during defrost, then eventually freeze together in clumps. Increasing the food load in the freezer will buffer the warmth from the defrost cycle and keeps the ice from melting. Lack of use: When the ice bin is full, the pressure from the weight of the cubes can cause the bottom cubes to fuse and clump. To prevent this from happening, discard the clumped ice and check the bin periodically to ensure the ice is not building up. If you do not use a large amount of ice, move the feeler arm on the icemaker to the up position to turn off the icemaker and stop ice production. For more information on the causes of clumping cubes. If the ice bucket is not seated correctly, ice will not dispense properly. Make sure the ice bucket is in the correct position. Refer to Use & Care manual.

Aug 05, 2012 | Maytag Refrigerators

1 Answer

Have a gs201eta ww refrigerator ice maker problem Unit makes ice, light works and water dispenses from the door. However ice cubes and crushed iced does not dispense from the door. The dispenser motor...


The fridge gets its cold air from the freezer through a vent between the freezer and fridge. the fan in the freezer blows air through it. there is a flap you adjust with the fridge temp. control.

Make sure it's opening and closing when you adjust the fridge temp. try to chec in the user guide.

Hope helps.

Jul 07, 2010 | Refrigerators

1 Answer

Maytag ice maker will not release cubes


Sounds like it has a " seeping " water valve . Only thing to do is replace the water inlet valve . There is a certain amount of water to go into icemaker at fill . A seeping valve will let water continually drip into icemaker , making large cubes which icemaker cannot dump . A larger amount of seeping , will overfill the icemaker , and drip into the freezer and floor .

Aug 12, 2009 | Maytag Refrigerators

1 Answer

My jenn air freezer is not making cubes. the


The water inlet valve may be staying open. You can swap the wires on the dual water inlet valve and disconnect the water line at the valve which goes to the ice maker. When you try the water dispenser the water will come out there. When you stop the water dispenser, if the water at the valve doesn't stop, the valve isn't closing so you'll need to replace it. If it does stop after trying it several times then the problem is with the ice maker.



The water inlet valve on the back of unit opens when the ice maker needs water. If the valve doesn't seal good because of sediment or wear it will continue to drip and when the water reaches the ice maker supply tube it will freeze. You can take the water line off the valve and watch to see if it drips.

Jul 13, 2009 | Jenn-Air Freezer Jenn Air Clear Cube Ice...

2 Answers

Ice maker only makes crushed ice, no cubes I have the same problem... The same switch works fine for the crushed ice and water setting but will not dispense cubed ice. It only gives crushed.


hi.
I slid out the tray, found the lever in the back where the rod went in, pulled it down, reinserted the ice tray, and IT WORKED! At first I thought I broke the lever, because I had to hold it down with a knife while I was inserting the tray, but it just must have been stuck.
chek these sites
http://forum.appliancepartspros.com/refrigerator-freezer-repair/23620-ice-maker-only-makes-crushed-ice-no-cubes.html

There is an opening next to the auger that dispenses the ice. In there there is a lever that must move up and down. It actually seats the metal rod on the bottom of the ice maker and controls cube or crushed. Make sure the lever is down (cube position) when you return the basket to the freezer. I had to hold it down while I slid the rod into the opening. Cubes again. http://www.applianceblog.com/mainforums/showthread.php?t=783
if satisfied plz rate this answer
all the best
regards

May 27, 2009 | GE GSS20IEPWW / GSS20IEPCC Side by Side...

1 Answer

Whirlpool ice dispenser not working, but water is


There are three common problems with icemakers:

There's no ice
Small or too few ice cubes
Specks in the cubes
Note: If your repair problem isn't listed, click here to email the RepairGuru. He will give you the help you need.


There's no ice If your ice maker has stopped producing ice completely, check these, in this order:

  • It may be turned off. Look for the wire along the right side of the ice maker that looks a bit like a coat hanger. If the wire is in the raised position, the ice maker is turned off. If so, try one of these:


    • If your ice maker has a small red plastic lever, lower it to lower the wire.


    • If there's no plastic lever, simply lower the wire.


    In either case, the ice maker should begin producing ice again. Also make sure that the temperature is 8 degrees Fahrenheit or lower. If the freezer is too warm, the ice maker won't cycle properly.

  • The ice maker fill tube may be blocked with ice. If so, melt the blockage using a hair dryer-but be careful to not melt any plastic parts! Also replace the water shut-off valve or water-inlet valve, or both, if necessary.


  • The ice maker head assembly may have broken parts. Look to see if the gears are broken. Check to see if the small plastic arms that rest against the ice rake are broken. If the ice maker head assembly is modular and you've found broken parts, you can just replace it.


Small or too few ice cubes If the ice maker is producing ice poorly--making small cubes or too few cubes--you probably have a clogged water line, a defective water-inlet valve, or a defective ice maker mold thermostat that isn't cycling properly. Check these:

  • The water line that's attached to the back of the refrigerator. Make sure you have good water flow. If the flow is poor, repair, clean, or replace the tubing or the shut-off valve that supplies the water.


  • The water-inlet valve. Replace it if it has failed.


  • Check the freezer temperature. If should be 8 degrees Fahrenheit or lower. If the freezer is too warm, the ice maker won't cycle properly.


  • The ice maker mold thermostat. Make sure that it's cycling properly.


Specks in the cubes If you find black or gray specks in your ice cubes, have a look at the ice cube tray. If the protective coating is peeling away, the most economical solution is to completely replace the ice maker.

Apr 01, 2009 | Whirlpool GS6NBEXR Side by Side...

1 Answer

LG ice maker only making two ice cubes at a time


Colenoid in the ice dispenser may be clogged or have a small amount of trash in it. Is there a filter on before the fridge (just after the ice maker shutoff)?

Mar 21, 2009 | LG LRSC26910 Side by Side Refrigerator

1 Answer

Ice Maker Stopped Making Ice & Cubes are Melting (rest of freezer is cold)


can you pull the cover off the ice maker to see if the gears are bad?let me know more-mike

Oct 12, 2008 | Kenmore 55612 / 55614 / 5561 / 655619 Side...

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

729 people viewed this question

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

Sal DeAngelo

Level 3 Expert

2122 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

dweatherby

Level 2 Expert

239 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...