Question about HP Office Equipment & Supplies
When you are cleaning a true laser printer, two areas dome to mind, the corona wire and the wiper brush. Clean goth being careful to not scratch the drum nor break the wire.
Wash your hands with COLD water or be prepared to wear the toner for about 6 weeks.
I hope this helps.
Posted on Sep 27, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Select your operating system and download the driver for it.
Posted on May 08, 2009
Most likely the heat roller is breaking down in the fuser. The fuser must be replaced. But before going that far, replace the toner cartridge, as it may have a bad cleaning blade. 85% of all print quality defects are cartridge related. This particular model of machine has a very brittle heat roller that more often than not wears out prematurely. This is true across the board for all of the newer HP low end laser printers unfortunately.
Posted on Sep 30, 2009
Faded prints are possible due to following reasons.
1. Fogged red mirrors inside the Laser box
2. Alignment of the Laser Box
3. Calibration Problem
4. Cleaning Problem
I will guide you with simple steps first, if this dosen't work working with laser box is little tough & time consuming, hence will describe later.
To Calibrate the colors, Press the 'Green Button' in the front panel, use the arrow keys to navigate through menu.
Select 'System Setting' by pressing the green button again, navigate using the arrow keys and select the 'Calibrate Color', select green button to select and confirm to 'Calibrate Now'. This will take few minutes.
In addition to that, to clean the paper path, select the green button and use the arrow keys and navigate thru' menu and select 'Service'. select using the green button and navigate through menu and select cleaning option. This will take few minutes.
Try printing some documents and check whether you have fixed. If you have not got the original print quality, Let know to guide you more technically.
Posted on Jun 18, 2010
Tips for a great answer:
Aug 08, 2011 | HP LaserJet 6L Printer
Feb 22, 2011 | HP LaserJet 6L Printer
Jan 03, 2011 | HP LaserJet 6p Printer
Dec 13, 2010 | HP LaserJet 6L Printer
Apr 24, 2010 | HP LaserJet 6L Printer
Apr 06, 2010 | HP LaserJet 6L Printer
May 20, 2009 | HP LaserJet 6L Printer
127 people viewed this question
Usually answered in minutes!