Question about Insignia IS-LCDTV32 32 in. Television

1 Answer

Dark screen, no sound

I can not see anything from the screen, no sound and no picture.
It only blanks every second. Please help me.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 106 Answers
Re: dark screen, no sound

1. Check the Power Supply board to see any blown cap? Output voltages are normal?
2. If Power Supply board is ok, replace the Main Digital board.

Posted on Jan 01, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Thomson flat panel tv has sound but no picture (comes on for about a second then goes blank)

if you can see if the screen lights from behind when the picture apears for a second then the problem is probably the invertor or worse the screen

Jan 06, 2013 | Thomson Flat Panel Televisions


Diagnosing a LCD blank screen problem.

Recently a 3 year old VIzio TV I bought started having problems. The set would turn on normally for a few seconds then the picture would go dark with everything else operating normally including sound. Remembering a similar laptop computer problem I diagnosed previously, I immediately suspected a defective TV screen backlight. To verify this in your own TV, get a very bright flashlight and with the TV operating in the failed blank screen mode, shine the flash light into the blank screen from various angles and distance (including touching the screen). If the LCD is still operating, you'll see a dim motion in the flashlight's reflection, thus proving it is indeed a failed backlight.

on Jan 27, 2015 | Flat Panel Televisions

1 Answer

Picture for only a few seconds then goes dark

Hold a flashlight to the screen after it goes blank, if you can still see anything on the screen, then it is time to replace the inverter boards (there are 2 of them, VIT71043.50 and VIT71043.51).

Mar 26, 2012 | Sanyo DP42848 LCD TV

2 Answers

Watching TV and it suddenly turns off just like if you had the remote and shut off the TV. We set in amazement for a few seconds and then we turned the TV back on. We had sound but no picture. It was a...

Tv turn on now,does it have a flashes of picture only a few second than dies and than have only sound left?Yes,than the tv 2 long LCD inverter boards are dead.These 2 long LCD inverter boards are one to the left one to the right both must be replace.The 2 long LCD inverter boards job are to help the LCD screen panel to have a backlight to produced a picture.Tries websites like, to buy those 2 LCD inverter boards for the replacement.

Mar 02, 2011 | LG 50PJ350 50 in HD-Ready TV

1 Answer

Picture shuts off

Is there a dark patch when you see the picture, easiest way to check is on the tv tuner with no cable attached, this way you have a grey static screen, if there is a darkness across the screen when it lights for that breif moment, then it may have a broken backlight tube. Had the same problem with my 32" LG.

Jul 29, 2010 | Astar LTV-32ASB 32 in. LCD Television

1 Answer

TV blank, sound okay, picture comes for half a second while switching channels

i am a technician and i too have this issue. if any of you can get a schematic and service notes, send them to trae3@live .com and i WILL find the problem and report to each of you. i cant get any help from sears all i need is to speak with a technician who actually works on these things, get the paperwork and then i am sure it is a matter of a module swap. any info will help us!

Jun 23, 2008 | Protron PLTV-26 26 in. HD-Ready LCD...

2 Answers

Maxent MX-27X2 no video,but sound

may not be the inverter but the main board bad

Dec 30, 2007 | Flat Panel Televisions

1 Answer

No video on LCD 32' insignia

If you have audio and no picture shine a flashlight across the screen and see if you can see a very faint picture on the screen.
If so the backlight drivers need to be replaced... A shop job unless you want to risk breaking the screen - and not terribly expensive.

Nov 09, 2007 | Insignia IS-LCDTV32 32 in. Television

Not finding what you are looking for?
Insignia IS-LCDTV32 32 in. Television Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Flat Panel Televisions Experts

Sp Gupta

Level 3 Expert

656 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

The Wyzzyrd

Level 2 Expert

83 Answers

Are you an Insignia Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides