Question about Tomtom One XL GPS Receiver

1 Answer

The green light remains on, but its not holding charge and then switches itself off

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,111 Answers

If its under warranty yet, send it back..if not, plug it in to your usb port on your computer and charge it a few hours and see if that helps..it should work but this model is know for that problem and sometimes you have to disconnect the battery and plug it back in to get it to boot up again.

bill

Posted on Sep 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My DMC-TZ3 battery charger green light is flashing, why ?.


I have the same problem. When I try to charge a battery the green LED onthe charger flashes green and the battery does not charge. Any ideas?

Jul 08, 2010 | Panasonic Lumix DMC-TZ3 Digital Camera

1 Answer

Photo 1290 Changing ink cartridge


Hi there,

You may have to reset your printer, for when the green an red are flashing. Please do the following in order to reset the printer;
1-switch off printer itself
2-switch off at socket for 20 seconds
3-hold down both black buttons on front
switch on at mains
4-switch on printer itself
green and red flash together
5-now switch off at mains and leave for 3 seconds
6-while holding down both front buttons again, switch on at mains
both green and red flash together so release
7-quickly hold down the left botton, the one with the scroll icon above it.

Hold this until it resets itself, - the print head will re
charge and it will be obvious.

Restting by unpluggin rather than turning off at mains tends not to work.

This must help you as it worked for me.

Regards,

Anirban Mazumdar

Jun 05, 2010 | Epson Stylus Photo 1290 InkJet Printer

1 Answer

Canon i9900 printer. Yellow light remains on. Does not blink. Green light will not come on. Anyone know what part needs to be replaced?


1) With the printer powered off, hold down the resume button and press the power button.

2) While holding down the power button, release the resume button and press the resume button twice in succession. Now release the power
button. The indicator will blink in green and remain lit in green.

3) Press resume 4 times (Green) for Waste ink counter reset.

4) Press the power button. The printer will switch itself off after performing the function.


Or try

1) Power off printer
2) Hold RESUME button then press and hold POWER. (The beeper MAY sound once, or may not depending on your model.)
3) Hold POWER and Release RESUME.
4) Press RESUME twice then release both POWER and RESUME buttons.
5) When the indicator lights steady, press RESUME 4 times (for the S900, 3 times for the 8200 apparently).
6) Press power to set data.
7) Print away!

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

Feb 21, 2010 | Canon I990 InkJet Photo Printer

1 Answer

Off light remains on cannot switch to green and turn tv on


Okay this sounds like you have two blown capacitors on the signal board

Jan 18, 2010 | Maxent MX-27X1 27 in. HD-Ready LCD...

1 Answer

Canon 19900 printing fine then refuses to print showing error 300


1) With the printer powered off, hold down the resume button and press the power button.

2) While holding down the power button, release the resume button and press the resume button twice in succession. Now release the power
button. The indicator will blink in green and remain lit in green.

3) Press resume 4 times (Green) for Waste ink counter reset.

4) Press the power button. The printer will switch itself off after performing the function.


Or try

1) Power off printer
2) Hold RESUME button then press and hold POWER. (The beeper MAY sound once, or may not depending on your model.)
3) Hold POWER and Release RESUME.
4) Press RESUME twice then release both POWER and RESUME buttons.
5) When the indicator lights steady, press RESUME 4 times (for the S900, 3 times for the 8200 apparently).
6) Press power to set data.
7) Print away!

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

Sep 16, 2009 | Canon i9900 InkJet Photo Printer

1 Answer

Which indicator light on my mobil line battery charge complete


the green light should remain on when fully charged.

Regards
GeWiz.

Jan 11, 2009 | RTO Mobil Line Mobility Scooter Chair...

1 Answer

I have a canon i9900 printer. I am getting 5 yellow flahes and 1 green. Any suggestions?


1) With the printer powered off, hold down the resume button and press the power button.

2) While holding down the power button, release the resume button and press the resume button twice in succession. Now release the power
button. The indicator will blink in green and remain lit in green.

3) Press resume 4 times (Green) for Waste ink counter reset.

4) Press the power button. The printer will switch itself off after performing the function.


Or try

1) Power off printer
2) Hold RESUME button then press and hold POWER. (The beeper MAY sound once, or may not depending on your model.)
3) Hold POWER and Release RESUME.
4) Press RESUME twice then release both POWER and RESUME buttons.
5) When the indicator lights steady, press RESUME 4 times (for the S900, 3 times for the 8200 apparently).
6) Press power to set data.
7) Print away!

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

Dec 14, 2008 | Canon BJC S450 InkJet Printer

1 Answer

TOM TOM 910 won't charge/turn on


there is a little push button on the back. use a niddle and push that down at the same time hold the power button. you will hear the unit turning on itself and then it should work fine

Aug 10, 2008 | Tomtom GO 910 GPS Receiver

Not finding what you are looking for?
Tomtom One XL GPS Receiver Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tomtom GPS Experts

LP

Level 3 Expert

485 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Are you a Tomtom GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...