Question about Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag washer i have a maytag top load washer and recenty my pump went up had to replace washer is only 4 years old 2 months later when it go into spin cycle there is a really fast clicking sound wants it gets up to speed any help?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Master
  • 619 Answers
Re: maytag washer

The lock at the center of spinner fallen /return it and tight it.

Posted on Jan 10, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Maytag washer leaking from bottom

This is a fix for the Maytag MAH2400AWW, the machine kept displaying SUDS, the machine is 2-3 years old and it started doing this 4-5 months ago. I cleaned out the washer, and used HE detergent, ran it empty, to try to flush it out, used approved cleaners and ran it throught the cycle, still no good. I finally took out out a maintenance contract with BSF, the service guy came out today pulled the pump off and showed me inside it was missing half of the blades off the impeller. I remembered a year ago a coin had wedged in the pump which I took out and put back, not realising it had taken some teeth off the pump. Therefore the pump was not able to pump out the sudsy water very well which was staying inside the drum causing the suds light to come on, they installed a new pump for me, which was covered in the contract for free. Now it's working like new again.

Mar 06, 2012 | Maytag MAH2400A Front Load Washer

1 Answer

Should we buy a cabrio?

Its recommended to buy whirlpool washing machine they are having the spares for their old model also when compared other brands

May 06, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

My 3 year old Maytag SAV5710AWW top-load washer

It is your water pump. If you don't know what you are doing it could be tough.

Nov 20, 2009 | Maytag SAV5710 Top Load Washer

1 Answer

I have had my washer for almost 4 years. one month after the warranty was up it broke. I called the repair man and they went ahead and honored it but then 2 years later it did the same thing. The code...

sounds like its an "L" code ? which is a lid switch error code....the lid switch is either broken or stuck open possibly soapy water got in the switch located under the lid there is no remedy except to replace it or try and test it

Sep 28, 2009 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Washer is 8 months old. Three bad pumps

I would call Maytag directly and ask them to replace this washer for you or have them provide FREE to you, at least a lifetime warranty on the pump and a five year warranty on the rest of the washer parts. Sounds like you got a lemon unless you wash lots of rugs or have a hair salon. If this is the case, you won't be able to get a new warranty, but if it is NOT the case, I'd take this all the way to the head of Maytag and they should make this right for you. I hope this turns out well for you, I'd like to know the outcome. The best of luck to you!

Sep 07, 2009 | Maytag Centennial 3.2 cu. ft. SuperSize...

2 Answers

Maytag top loading washer will not agitate

My rule of thumb: Take what you paid for the washer new and divide by number of years without repairs. That is your cost per year for the washer. If the repair will get you another year and is less than the number above do the repair. If you have done more than 2 major repairs in a year it is time to think new. eric

Aug 10, 2009 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Washing machine spin cycle

chances are the pump may have something in it or the drain line is kinked a little front loader machines have a clean out on the pump that you can get to buy taking the lower front panel loaders you have to pull access cover in the rear and pull hose off and check for blockage also check belt tension and quality of belt

Dec 16, 2007 | Maytag MAV7600 Top Load Washer

1 Answer

Maytag Neptune Top Load Washer - Rinse Cycle won't run - Machine says nF

Sounds like the 'Wash water' is not pumping out fully,You need to drain the water by lowering the empty hose into a bowl & check the pump for a blockage ( if the pump is an 'electric one' check that it is working). TURN POWER OFF FIRST

Oct 25, 2007 | Washing Machines

Not finding what you are looking for?
Maytag Atlantis MAV6000 Top Load Washer Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Al Clark

Level 2 Expert

290 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides