Question about Sony Cyber-shot DSC-W55 Digital Camera

Open Question

Access problem When I turn the camera on, all I get is the message "access" followed by another message to "turn off and on again". When I turn off and on as it said, all it does is recycling the same messages again and again and again..

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Arpi
  • 326 Answers

SOURCE: CYBER-SHOT DSC-W70

Hello LILYD, there is no password. Replacement/realignement of the optical block will solve the problem. Please contact the nearest Authorized Sony Service. The price for optical block (lens) is about 70 Euro (for my account). If you need more info please advice, Arpi

Posted on Mar 17, 2007

  • 1 Answer

SOURCE: error message

my camera did the same thing, lens retracts 3 or 4 times, and then proceeded with an error message "turn off and on again". I pressed the power button probably about 10 times, didn't work, so then i gave it a good smack on the top of the frame a few times while repeatedly pressing the power button and it did the trick. Hasn't gave me problems since...hope it helps

Posted on Nov 05, 2008

rulds2008
  • 3866 Answers

SOURCE: when i turn on the camera the lens goes in and out

This would be the auto focus sensor that instruct the lens to find focal point witch has gone bad you need a camera shop short put there. I mean if there where a end user remedy i would be the first to give it to you but infact there is not you need a camera shop. you cantry taking the batterys out and put a fresh battery in but i think that is a no go solution so please do seek professional advice going forward locally.


for my free efforts here please do rate and leave feedback.

Posted on Apr 28, 2010

  • 340 Answers

SOURCE: Have a Sony Cybershot DSC-W90

For these few days i have saw users asked this problem here again and again. Come to see my article in my blog, Maybe it will help: turn the power off and on again maybe something will helpful

Posted on Jan 04, 2011

Kensolutions
  • 455 Answers

SOURCE: turn the power off and on again message

Hi,


Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.

Performing a manual power reset

Turn off the camera.

Remove the battery pack.

Press and hold the power button for 30 seconds.

Allow the camera to remain without power for 60 seconds.

Reinsert the battery pack.

Turn on the camera.

To reset the Camera back to factory default, select the INITIALIZE Option from the Main Settigs 1 Menu of the Camera to OK.This will set the user defined settings back to factory default. The images and videos will not get deleted.


If the issue persists, service may be required.


Thanks for contacting FixYa

Posted on Apr 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Not working always show "turn thepower off and on


I'm sorry that the Camera is displaying the error message. "TURN THE POWER OFF AND ON AGAIN" displays on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset. Please follow the below steps to perform a power reset.


·Turn off the camera.
·Remove the battery pack.
·Press and hold the power button for 30 seconds.
·Allow the camera to remain without power for 60 seconds.
·Reinsert the battery pack.
·Turn on the camera.



Also try initializing the Camera if you're able to access the Menu items on the Camera. The Initialize option will be available underSetup or Main settings Sub Menus.

If the issue persists again, service is required. Pleaseclick hearto locate the service center near your area.

Thanks for understanding. Please let me know if your require any clarifications.

Aug 01, 2011 | Sony Cybershot DSCW310 Digital Camera

1 Answer

My camera displays "turn the


I'm sorry that the Camera is displaying the error message. "TURN THE POWER OFF AND ON AGAIN" displays on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset. Please follow the below steps to perform a power reset.



·Turn off the camera.
·Remove the battery pack.
·Press and hold the power button for 30 seconds.
·Allow the camera to remain without power for 60 seconds.
·Reinsert the battery pack.
·Turn on the camera.


Also try initializing the Cameraif you're able to access the Menu items on the Camera. The Initialize option will be available underSetup or Main settings Sub Menus.
If the issue persists again, service is required. Pleaseclick hearto locate the service center near your area.

Thanks for understanding. Please let me know if your require any clarifications.

Jun 10, 2011 | Sony Cyber-shot DSC-W70 Digital Camera

1 Answer

My sony Camera (DSC -W110) is showing "Turn the power off and on again" while switch on the camera,it appers again & again after switching the camera on and off


I'm sorry that the Camera is displaying the error message. "TURN THE POWER OFF AND ON AGAIN" displays on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset. Please follow the below steps to perform a power reset.





· Turn off the camera.

· Remove the battery pack.

· Press and hold the power button for 30 seconds.

· Allow the camera to remain without power for 60 seconds.

· Reinsert the battery pack.

· Turn on the camera.




Also tryinitializing the Cameraif you're able to access the Menu items on the Camera. The Initialize option will be available under Setup or Main settingsSub Menus.

If the issue persists again, service is required. Please click hear to locate the service center near your area.

Thanks for understanding. Please let me know if your require any clarifications.

Mar 21, 2011 | Sony Cyber-shot DSC-W110 Digital Camera

1 Answer

Sony DSC-W55 Access Message - lenses going in & out automatically


Please remove the Battery from the Camera then reinsert it after two minutes. Make sure that the Battery is fully charged. if menu options are accessible on the Camera then reset it to the original factory settings. Please follow the steps that are mentioned below to reset the Camera to the original factory settings:

(i) Please turn ON the Camera.
(ii) Then use the control button on the Camera to the select the Setup (setting) option.
(iii) Next, select the Setup1 option then "initialize".

Performing the above mentioned steps will reset the Camera to the original factory settings. If the issue persists then service will be required.

Jul 13, 2009 | Sony Cyber-shot DSC-W55 Digital Camera

1 Answer

SONY DSC-S600


If you are able to access the MENU option, then try to initilize the camera by following the steps mentioned below:

Please press MENU to display the menu items.
Please go to the SETUP menu and select the SETUP 1 option of the Camera.
You would see the intialize option.

Thanks

Aug 24, 2008 | Sony Cyber-shot DSC-S600 Digital Camera

1 Answer

Software problem


I'm sorry that the Camera is displaying the error message. "TURN THE POWER OFF AND ON AGAIN" displays on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset. Please follow the below steps to perform a power reset.
  • Turn off the camera.
  • Remove the battery pack.
  • Press and hold the power button for 30 seconds.
  • Allow the camera to remain without power for 60 seconds.
  • Reinsert the battery pack.
  • Turn on the camera.

Also try initializing the Camera if you're able to access the Menu items on the Camera. The Initialize option will be available under Setup or Main settings Sub Menus.


If the issue persists again, service is required. Please click hear to locate the service center near your area.

Thanks for understanding. Please let me know if your require any further assistance.

Jun 23, 2008 | Sony Cyber-shot DSC-N1 Digital Camera

1 Answer

Access message


turn on
take hold of the end of the lense and gently pull and twist you may hear it click but dont force it then turn it off and on again this may solve the problem.

Mar 29, 2008 | Sony Cyber-shot DSC-W55 Digital Camera

1 Answer

CYBER-SHOT DSC-W70


Hello LILYD, there is no password. Replacement/realignement of the optical block will solve the problem. Please contact the nearest Authorized Sony Service. The price for optical block (lens) is about 70 Euro (for my account). If you need more info please advice, Arpi

Mar 07, 2007 | Sony Cyber-shot DSC-W70 Digital Camera

Not finding what you are looking for?
Sony Cyber-shot  DSC-W55 Digital Camera Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Cameras Experts

kakima

Level 3 Expert

102366 Answers

james laughton
james laughton

Level 3 Expert

2118 Answers

JonSnell Electronic
JonSnell Electronic

Level 3 Expert

21384 Answers

Are you a Sony Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...