Question about RCA 32F531T 32" TV

1 Answer

Remote Control I accidently spilled some soda on my remote control and now it will not work on tv. I have a 27" digital tv. The nuber on the back is 27V414TG413CE036 ATC0I0A. I need to get a new remote. How do I fine a remote for this TV? I tried new batteries and it will not work.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers
Re: Remote Control

Most likely the soda gummed up the contacts inside the remote. You can disassemble the remote and clean the contacts on the pc board and, if it has one, the rubber membrane, which is conductive. Use a pencil eraser for the metal contacts on the pc board after cleaning it.

Posted on Jan 02, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Wansa CRT TV-where to get the remote control?original remote is damaged

If you wish to buy its original remote control, you have to contact the authorized service center. If you wish to buy a universal remote control, you should know about, which brand remote control have setup code to your TV/device brand. You should first make sure about the number of digits in the codes to your device have. There are 3-digit, 4-digit, 5-digit and even 2-digit codes. You can get this detail by the code list attached to every universal remote control. The brand name of the remote control you select isn't a matter; but, its code list should have setup codes to your TV/device brand, otherwise you can't set it up with your device. For more information; check the links given below, and find which brand remote control has setup codes to your TV/Device brand. Setup code list & setup procedure to some popular brand remote controls are given. Check it, and determine which brand remote control should be bought, and buy that brand remote control, according to availability. For more information, check these links.

Nov 14, 2013 | JVC AV-27230 27" TV

2 Answers

I was trying to look for the input, and accidently locked the screen

You will need to have the remote:
Press the VOL+ on the remote control and the CH+ button on the front of the TV.

The TV will prompt you to enter a new password.

May 03, 2011 | RCA TruFlat 27F520T 27" TV

1 Answer


Take it apart and wipe everything clean....I spilled soda on my remote and the same thing happened sometimes I'd push one button and I'd turn off the TV or go to the meny when I wanted to chabge the channel... A couple of screws and it will come right apart

Feb 18, 2011 | Sylvania Standard (CRT) Televisions

1 Answer

I accidently locked the fpa how do i unlock it without a remote

Unfortunately, there is really no other way to unlock fpa other than using a remote control.

You can buy any universal remote control and this can be use to unlock fpa.

Good luck.

Sep 20, 2010 | RCA TruFlat 27F520T 27" TV

1 Answer

My remote control stopped working ,new batteries did not help...even tried a new one, still didn't work....any thoughts...

Get auniversal remote or a new original. If your handy you could take apart the bad one and look for bad solder contacts (or something spilled in it)

Sep 21, 2009 | Philips Magnavox 27MS343S 27" TV

1 Answer

Front panel lock on RCA TV

front panel was locked by accident and we do not have the original remote control only an after market and ir does not access the menu, can I unlock it without the remote control?

Jun 17, 2009 | RCA TruFlat 27F520T 27" TV

1 Answer

Comcast DVR remote won't work the volume on my Samsung tv

Have you dropped it by accident from a high height or on hard surface? Have you spilled any liquid to it?
Doesn't all the button's seems to work?
Here's a one trick if you have a mobile phone with camera:
enable camera on your mobile phone. Look for a WORKING remote control from the other electronic stuff at your house. Point your remote control to camera lenses and press any button. Do you see blinking red light on your mobile screen? Try this with your DVR's remote control and see if it works. If you are sure about the polarity of the batteries and checked that they are new enough, ther's only two solutions: buy a new remote control according to your TV set model (sometimes it's hard to find) or buy a universal remote control

Feb 14, 2009 | Jensen TS2050J 20" TV

1 Answer


you need to enter the 3 digit code in the manual
hold the set and tv buttons, then enter the code and it should work

Nov 03, 2007 | Samsung TXN2730F 27" TV

1 Answer

Spilled soda inside my tv by accident

  • put the tv off
  • remove the plug
  • remove soda from tv
  • let it dry for few days
  • put on
  • it is my experience it will come on.
  • hope this will help.

Oct 11, 2007 | Proscan PS27500 27" TV

Not finding what you are looking for?
RCA 32F531T 32" TV Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66352 Answers

John mullen

Level 2 Expert

229 Answers


Level 3 Expert

2963 Answers

Are you a RCA Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides