Question about Kenmore 96213 Electric Kitchen Range

1 Answer

Help me How I turn on the gas pillot on my stove?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert that hasĀ over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 262 Answers
Re: help me

You dont have a pilot light on the newer models when you turn the knob on a glow bar lights up and after it pull so many amps it will open the gas valve and oven will light. so all you have to do is turn on gas to the stove /plug it in and after the gas bleeds through the range it should light if not you will need to call a service tech. to find out why. good luck

Posted on Dec 18, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Our gas oven has not worked in over a year. The electric panel was malfunctioning. The burners work fine. We just had some work done and had to turn off the radiators and manually fill the boiler an

The hum may be a b ad regulator in the stove. Pull stove out and see if regulator is humming. It's where the gas line connects to stove.
Maybe the power was interupted to the stove which may have reset power to control board.

Oct 22, 2014 | Kitchen Ranges

1 Answer

MABE Stove Manual in English Model : EM6120B2

hello i recently bought a mabe 6 burner gas stove but i need to know the manual is not in english and do i have to plug in before i can turn the gas on? its electronic ignition by the way


May 19, 2010 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

No Clicking Sound

Sounds like the ignitor control module is bad, if none of the ignitors are working. If it is only one burner with a problem, it is likely an ignitor.

May 12, 2010 | Brown Stove Works TM210-3 Gas Kitchen...

1 Answer

Hi i have astoves gas cooker, model 600gdoa and i

Stoves 600GDOa - when the glass lid is lifted to start cooking it turns on (anticlockwise direction) the switch, which turns on the gas - unlit. I wouldn't believe it unless it happened to me. At the moment the switch is taped shut but I would like some ideas.

Mar 16, 2010 | Stoves 600GDOA Gas Kitchen Range

1 Answer

Installed stove, no flames on burners?

It may still have air in the system, turn on one burner on and allow the gas to flow with a lighter in the path of the gas see if the gas lights of at least explodes I mean until it goes Poof, once it does that if it does not light then pull the top off the stove and adjust the vents on the pipes to focus the flames and how much air is blended in with the gas, also turn the burner so that the holes are half way open, I am not sue about your stove but most have an adjustment by turning the burner 1/4 of a turn to change the flame characteristics. if this does not help post here and I will see what else I can find out on your stove. I need the modle of the stove and the regulator number where the gas hooks up.

Jul 23, 2009 | Kitchen Ranges

1 Answer

Gas stove makes clicking noise when turning on

When a gas stove is clicking, it means it is trying to ignite the burner. If the knob is held in the ignite position for more then 3 seconds and the burner does not ignite, it means that (1) the gas is shut off to the stove, (2) she does not have gas service set-up yet at the apartment, or (3) the gas nozzles feeding the burner are dirty and clogged.

Most of the time, when you move to a new apartment, you need to call the gas company and have the gas turned on, unless it is included in your rent. Either way, when a house or apartment is unoccupied, the gas is turned off for safety reasons. I would contact the landlord to be sure.

Mar 22, 2009 | Stoves 600SiDOm Gas Kitchen Range

1 Answer

I have a used kenmore propane gas stove that i just bought from someone. We have hooked it up but can only get the oven to come on. The stove top burners will not come on. We we turn on the burners we do...

In the old days stoves were lit with a match. If this does not work for you it would be due to the stove's lines remaining "airlogged" after the move. The oven purged and ignited more easily because it has a much larger orifice, so the air bled more quickly. I expect if you were to leave one burner turned on long enough for the air to bleed out you will find it to ignite normally. Do not leave the stove to bleed unattended, and if you encounter a strong smell of the gas, turn off the burner, and ventilate the room as needed. The smell of gas would indicate that gas is present, it may be possible that a lead came disconnected from the ignition module in the back of the stove. Again if this is the case, the ol' match will light the burner. Be Careful!

Dec 14, 2008 | Garland H283 Gas Kitchen Range

2 Answers

GE profile gas stove igniter don't stop igniting

take a look at the igniter located in the center of two burners. clean the gap with a stiff brush between the eletrode and the upper plate. the distance is preset at the factory. you may have enough buildup to close the gap enough to trigger the igniter.

Oct 23, 2008 | GE Profile Spectra JGBP79 Gas Kitchen...

1 Answer


you have an electric problem that it can be from lightening or replace the clock. so u must be sure that gas valve working mostly it must be 24 volt . if u haven't electricity on gas valve check the high limit switch if there is a combination u must change valve

Mar 10, 2008 | Amana RanARG7302 Gas Kitchen Range

1 Answer

Ge spectra gas stove top not lighting

no gas flow sounds like a bad gas regulato on the stove. as for the 5 year old ge profile with ignitors not working, you need a part called a spark modual

Nov 16, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...

Not finding what you are looking for?
Kenmore 96213 Electric Kitchen Range Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Barrett Palumbo
Barrett Palumbo

Level 2 Expert

1772 Answers

Cindy Wells

Level 3 Expert

4722 Answers

Are you a Kenmore Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides