Question about DISH Network 322 DTV Receiver

1 Answer

It won't aquire signal - DISH Network 322 DTV Receiver

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 374 Answers

You need a service call as there are to many possibilities that could cause this issue- bad diplexer, seperator, LNB, dish moved and is out of alignment, etc. Thanks for using Fix Ya.

Posted on Sep 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gps will not aquire


It needs a software update.

Jul 01, 2010 | Northstar 952 GPS Receiver

1 Answer

Dish Network 322 will not work both TV's at the same time. If TV1 is on it works fine, but TV2 says aquiring satellite signal. If TV2 is on it works fine, but TV1 will say aquiring satellite signal. Both...


Hello! Dan Busa with Dish Netywork here intermittent signal loss like that is usually caused by some sort of glitch a hard reset ( unplugging it for ten seconds ) will usually resolve this. If your signal strength is at or above 80 that should be fine, but keep in mind you need good signal strength on both the 119 and 110 satellites ideally you should be at 70 .

Jun 25, 2010 | DISH Network 322 DTV Receiver

1 Answer

Aquiring Signal displays for 5-10 minutes before hearing audio


It's a bad Sirius tuner. You can find them on ebay for 50 or so rebuilt and they are better than new. It's cold solder joints on the antenna input plug. Hope this helps

Jun 17, 2010 | JVC KT-SR2000 SIRIUS Radio Receiver with...

1 Answer

Garmin nuvi 200w not getting any signal....


I recommend trying the hard reset and the newest webupdater (March 31, 2010) and se if you get better results.

  1. Back up your Favorites.
  2. Perform a Hard Reset.
  3. Download and then run Garmin WebUpdater to replace its firmware / system software.

I hope that helps.

___________________
Nuvi 200 series manuals available here.

Feb 08, 2010 | Garmin nuvi 200W GPS

1 Answer

I am forever waiting for a gps signal


the signal is aquired from satilites, leave it outside for a while then come back to it, if it still hasnt aquired then sounds like you have a malfunction...call tom tom

Feb 04, 2010 | Tomtom ONE GPS Receiver

1 Answer

GPS 40 will not finish aquiring signal


make sure the gps have a full view of the sky. leave it in aquiring mode and let it sit there. My Emap took up to 35 mins once to reaquire the sats and get the updated info needed for position info.
if the unit has been off for a long time or moved a long distance from where it was last turned on, it can take a while for it to come back up.

Nov 06, 2009 | Garmin GPS

1 Answer

My Garmin Nuvi 350 does not aquire sattalites?


Make sure it is in its mount. The antenna is in the mount and needs to be connected tight also make sure You have a view of the sky and not parked in a garage that blocks the signal

Oct 28, 2009 | Garmin Nuvi 350 Car GPS Receiver

1 Answer

N ot able to aquire a satellite signal for two


have you downloaded the "HotFix" software update for the problem from Garmin yet? if not u will need a mini USB cable (avil on ebay for $5) and then register the GPS at this site www.mygarmin.com and select support or downloads and follow instructions..

Oct 01, 2009 | Garmin nuvi 255W GPS Receiver

1 Answer

My tom tom ONe cannot get a valid Satelite Signal just stays wait


If you are indoors then move outdoors to get a signal.

If you are outdoors then move your location by a few yards and sometimes it will suddenly aquire the satellites.

Happens occasionally with my unit. I normally set a route up then start driving and it suddenly starts to work OK.
HTH
Peter

Mar 07, 2009 | Tomtom ONE GPS Receiver

Not finding what you are looking for?
DISH Network 322 DTV Receiver Logo

Related Topics:

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

brian soufane

Level 3 Expert

693 Answers

john milligan

Level 3 Expert

512 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...