Question about Office Equipment & Supplies

Open Question

I have a Canon S330 printer, it works perfectly until today, there is no Black colour come out, other colours are still there. 've changed ink,but the problem still exist. Could I please get any suggestions?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Toenee1938
  • 1 Answer

SOURCE: magenta ink colour

I had the same problem. Try cleaning the print heads. They tend to clog. Remove the cartridges, then remove the print head. Tilted slightly, it comes out easily. Run very warm to hot water over the print heads until they all run clear. Use a turkey baster to apply strong pressure to each head until it runs clear. Blow off the excess water with mouth or blow dryer. Insert into the printer and proceed to print. If that doesn't solve it, you might have a bad cartridge, but there isn't much that can go wrong with the cartridge. I have an ip4200 and an MP830. They have the same print heads and same cartridges. I have cleaned each twice and they work like new.

Posted on Oct 05, 2007

  • 619 Answers

SOURCE: Canon Printer won't print black ink.

Hi , printer need head cleaning until the black ink visible and dark black appear. Replace also the retaining tank with absorbent pudding.

Posted on May 09, 2008

vegakitten20
  • 685 Answers

SOURCE: Lexmark x2650 printer not responding to new cartridge

yes you have to have both of them then everything should be fine.if you have the color cartridge that is empty put it in for now and see if it will work it will let u know that it is empty but at least you will be able to print in black

Posted on Jan 04, 2009

benwabnick
  • 2404 Answers

SOURCE: Have changed Ink Black and Colour... Stil getting error Message.

Make sure the tape covering the hole on the bottom of the black cartridge is removed. and then go into the printers folder and right click on your printer icon and go into the properties of that printer and there should be something in there to tell it that you changed cartridges and you can also print a test page as well.

Posted on Feb 07, 2009

komguy
  • 2306 Answers

SOURCE: Black and Colour Ink Low Messages - Canon MP180

You have to look online for the canon tool to reset the ink counters. When you refill these cartridges you have to run this program in order to re-use the cartridges.

Posted on Jul 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon pixma ip1000 print black colour with gaps.


Sounds like printing nozzle problems, or the waste ink absorber is saturated. There is step by step guide to cleaning it at
http://www.wikihow.com/Clean-the-Canon-Pixma-IP1000-Printer-Waste-Ink-Absorber

Jan 23, 2014 | Computers & Internet

1 Answer

The printer's lying to me


The printer requires both cartridges to have ink before the printer will initialize and operational. Even if you are only printing black and white both cartridge have to contain ink or the printer will error out. This is standard on all ink jet printers from every manufacturer. You will have to get ink before you can print.

Apr 28, 2013 | Canon Pixma MX410 All-In-One Printer

1 Answer

Canon mp 630 new cartridges for all colours but black not printing?


I'm no expert but my experience is:

There are two Black cartridges: Cli5Bk and Cli8Bk

Make sure both cartridges have ink in them and that you have removed all packaging including the orange strip.

Jan 14, 2012 | Canon PIXMA MP600 all-In-One InkJet...

2 Answers

Canon i9100: colors printing incorrectly


I've had the Canon i9100 since 2003 and have excellent photo printing results. In 2009 it started playing up and I'd gt some banding. More recently, black didn't want to print. It was as though the black ink in the print head got dry some days.

April 2010 - The colours started printing strange and I bought a brand new print head and installed it. Only takes a minute. Still had an issue with photo printing. Black and white was excellent but colours weren't true.

Found advice online to try cleaning the print head to print head carrier electrical contacts by rubbing them with a rubber eraser.

I did that and now I'm getting perfect colour photo prints again.

I had been thinking about buying a new A3+ printer but this is old printer is now working as good as new.

Nov 16, 2009 | Canon i9100 InkJet Photo Printer

1 Answer

Prining in colour not working?


because,some of your ink catridge colors are completed with your prior usages,, you have to replace your ink catridge,,..

Sep 27, 2009 | Canon PIXMA MP530 All-In-One InkJet...

1 Answer

Have changed Ink Black and Colour... Stil getting error Message.


Make sure the tape covering the hole on the bottom of the black cartridge is removed. and then go into the printers folder and right click on your printer icon and go into the properties of that printer and there should be something in there to tell it that you changed cartridges and you can also print a test page as well.

Feb 06, 2009 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Do you have to have colour ink when only printing in black


Yes you have to have ink in all of them. No, accordign to Canon it wil not work without them. 

Feb 04, 2009 | Canon i80 InkJet Printer

1 Answer

No black ink


Canon S330 Turn off printer
Hold down Resume button and press Power button.
Keep holding down Power button and let Resume button go.
Press Resume button 2 times then let BOTH buttons go.
Green lights will flash and then stop blinking.
When green lights are solid, press the Resume button 4 times.
Press the Power button and the printer should turn off, if not, press the Power button once more.
Your printer should respond as normal

Nov 22, 2008 | Canon S 330 InkJet Printer

1 Answer

Refilled ink cartridges problem colour


this is not a printer problem, you have a problem with colour cartridge! u can fix this in 2 diferent way: 1. replace the colour cartridge with new one, or gently clean the nozzle cartridge with a wet tissue until the cyan colour mark a line on the tissue just like the others colours: yellow and magenta. maybe must repeat this several times.

Sep 13, 2008 | Canon PIXMA MP150 All-In-One InkJet...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...