Question about Watches

Open Question

Invicta 9937 will not run

I have an automatic Invicta 9937 (old model with coin bezel and Swiss logo on dial face). It will only run for about an hour after I take it off. Is this normal. I have sent the watch back to Invicta twice for service. It seems to run worse now than before I sent it in. The first time I sent it back they sent me an entirely different watch that did not even run. I sent it back and they have finally returned my original watch but it runs worse than before. When I sent it in it was running fast and would only run for about 3 hours after I took it off. Any suggestions? Surely someone knows how to service this watch. I really like its looks but it is worthless if will not keep accurate time.

Walt

Posted by on

  • Anonymous Apr 23, 2009

    I purchased an Invicta Ocean Ghost II Stainless Steel Chronograph on 3/24/09 from SNBC (shopping channel). It ran GREAT until I took it off for a short 2 day hospitalization. Now, no movement at all... called SNBC and got their automated "sorry, you are important, but we are busy" recording...same with Invicta's Cust. svc line...nine (9) attempts!, the most recent lasting over 47 minutes before my cell battery died.



    I figured I leased this watch for about 3 1/2 bucks a day until it died. Now, it appears that I will have to be without it for however long it takes after sending it in and giving them some more cash until someone gets "unbusy" because I am so important.

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: i have breitling superocean watch.my

you're not supposed to change the time at certain times if it is an automatic. I think any time after 8pm and before 4am (but check your manual). Apparently it messes up the mechanism. Maybe that's the issue?

Posted on Oct 18, 2008

Ad
escapement
  • 2334 Answers

SOURCE: Breitling problem

This usually occur when the hairspring is disturbed ( some grease, dust particle, etc). Can be magnetized as well.
You need to find your nearest watch repairer and ask to overhaul your watch. After that it will run like new.

Posted on Jan 03, 2009

  • 4 Answers

SOURCE: DIFERENT DISPLAY FOR THE SAME WATCH MODEL.

A watch is considered Swiss, when it is made in Switzerland (hope I spelled that right), by a Swiss Comapny, using 50% or more parts that are also Swiss. Watches made this way will have "Swiss Made" Swiss" or a similar print on the back.

If it has the lables of "Swiss movement" "Swiss Case" then it means that it is only partly swiss made, and will not have a lable listed in the first part of this solution branded on the back.

Hope I helped, have a great day.

Posted on Jan 13, 2009

micromaster
  • 3614 Answers

SOURCE: Watch has been running fine, now running fast.

HI there,

If you have an Automatic Wrist watch. Some adjustment has to do inside the watch. You better bring the unit to any local watch repair shop to adjust or correct the polarity of the energizer.

Hope this helps.

micro

Posted on Jul 28, 2009

  • 1 Answer

SOURCE: how do you set the alarm for the invicta reserve

After fooling arround I found out that if you pull the arm all the way out and reverse turning the alarm arm can be set. Thanks for your concern

Posted on Aug 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Invicta model 12983, how to set day on the subdial


View the instruction manuals - Invicta

invictawatch.com/service/view-the-instruction-manuals
Enter your 4 or 5 digit model number to locate your watch. RECEIVE THE NEWSLETTER SOCIAL MEDIA · Terms & Conditions Customer Service Service ...Missing: 12983 ‎subdial

Setting Time Date Invicta Watch Chronograph - SmartBargains

https://www.smartbargains.com/.../Setting-Invicta-Chronograph.html
Know how to set time, day, and date in the Invicta Watch Chronograph. ... Invicta sells several different kinds of chronograph watches, with the two main ... and the Invicta Big Date and Day chronograph - the subdials that measure seconds and ...Missing: 12983

Invicta Reserve 48mm Octane Swiss Made Quartz ...


Jan 16, 2016 | Invicta Reserve Mens Arsenal Swiss Quartz...

1 Answer

Need a stem for an Invicta Swiss ISA 1872/220


You may have to refer this problem to Invicta for solution.

Jul 06, 2014 | Invicta Watches

1 Answer

The dial and spring on my Invicta 9937 Pro Diver are missing, Do you have replacement parts?


mcdevito75 here, Best Bet Contact shop NBC foer Invicta parts info, here"s their number, 800-474-6762 Hope this helps.

Aug 03, 2010 | Invicta Pro Diver 9937OB Watch for Men

1 Answer

40004-01-ABR01M Can you help me find this model


You can get the watch on links below.

http://www.watchesshopping.net/watches/SWISS-LEGEND-Capri-6638.html

http://www.watchesreplica.net/SWISS%20LEGEND_replica_watches%5CreplicawatchSWISSLEGEND_Capri_40004-01-ABR01M32172.html

http://www.worldofwatches.com/segf/SWISSLEGEND_watches_40004-01-ABR01M.html

http://www.fashion-replica.com/GoodsDetail/SWISS-LEGEND-3978-1307.html

Good Luck and please rate 4 thumbs for the free answer

Mar 25, 2010 | Swiss Legend Capri Mother Of Pearl Dial...

1 Answer

How operate invicta ocean reaf


Use this link: http://www.invictawatch.com/ I couldn't find your model, but no worries - Invicta is using Ronda (Swiss) or Miyota (Japan) movements. So, check them out and you will find yours.
Rate me, please.

Jan 11, 2010 | Invicta Watches

1 Answer

DIFERENT DISPLAY FOR THE SAME WATCH MODEL.


A watch is considered Swiss, when it is made in Switzerland (hope I spelled that right), by a Swiss Comapny, using 50% or more parts that are also Swiss. Watches made this way will have "Swiss Made" Swiss" or a similar print on the back.

If it has the lables of "Swiss movement" "Swiss Case" then it means that it is only partly swiss made, and will not have a lable listed in the first part of this solution branded on the back.

Hope I helped, have a great day.

Jan 13, 2009 | Invicta Swiss Pro Diver 9309 Wrist Watch

Not finding what you are looking for?
Watches Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Ansel Alberto
Ansel Alberto

Level 2 Expert

248 Answers

Marvin
Marvin

Level 3 Expert

82285 Answers

Are you a Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...