Question about Vehicle Parts & Accessories

3 Answers

HELP ANYONEE PLEASE

Hi anyone out there that knows how to connect a remote start alarm on a holden commodore vx 2002 that has a factory immobiliser?

Posted by on

  • 1 more comment 
  • m_m3911 Sep 27, 2009

    i know its not easy but ive been reading and reading for a month i have my alarms diagram and my b.c.m chart and i asked how much to install they said about 500aud because i have factory immobiliser and they have to disable it.i just read that if i leave the key on the on position for 2 hours the immobiliser disables

  • m_m3911 Sep 28, 2009

    yes its me man haha same car same problem. i sent you couple emails. i noticed with my car if the immobiliser is on the little led flashes but only if i lock it with the remote but if turn the key and lock the light wont start flashing. is that bypassing the immobiliser?

  • m_m3911 Sep 28, 2009

    sorry our hours are very different man

×

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 615 Answers

All what you need to do is locating the hot wire for the immobilizer and connected to P12 (10) brown/black and that should bypass it I am still trying to get the factory diagram for it to pass it to, unless someone on the board has one...

Posted on Sep 28, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,068 Answers

Okay i am back man! is this you right? i can't see someone doing the same car here on this site. i just got up and i will check the email you sent me.

let me knw if it is you?

Posted on Sep 27, 2009

  • 1 more comment 
  • michael schultz
    michael schultz Sep 27, 2009

    okay i don't see the bypass in those diagrams you sent me. so you will need to get one. now the 556u by directed electronics is the easiest one to use but you need an extr key to keep in it. i call the the key eaters. but the easiest by far to install and use! you said something about you may have one under the dash from the last owener? did he have a remote start in the car? that is the only time they are used. can you take a pic of it and sendit to me?

  • michael schultz
    michael schultz Sep 27, 2009

    hey you out there man?

  • michael schultz
    michael schultz Sep 28, 2009

    just wondering if everything is
    okay? let me know if i can help any more and please remember to accept
    and rate our chat! thank you



×

Ad
  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Contributor
  • 1,326 Answers

This is not so simple. A remote start alarm system even for a expierenced installer takes 2-4 hours. I would not recommend trying this with no expierence. If you cut or splice the wrong wire you can short your electrical system and cause more problems then before you started. If you need a remote starter installed its cheaper to buy it from a car audio place and they usually install for very cheap ($60 or so). If you take your own in it is about $100+.

Posted on Sep 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What each colourvwiringis for in vx ,2002,Commodore


The Holden Commodore (VX) is an executive car that was produced by the Australian manufacturer Holden from 2000 to 2002. It was the second iteration of the third generation of this Australian made model. Its range included the luxury variants, Holden Berlina (VX) and Holden Calais (VX), and it formed the basis for a new generation Holden Ute (VU) coup? utility and Holden Monaro (V2) coup?.
The VX series was produced between October 2000 and September 2002, as a minor restyling update to the VT series from 1997. It introduced greater model differentiation along with gains in crash safety. An intermediate Series II was launched in August 2001, featuring a revised suspension system among other changes.

Thanks,

Landon

Apr 16, 2017 | Cars & Trucks

1 Answer

Wat kind of v8 is suitable for a 1997 3.8 v6 holden commodore excutive


your VT /VX came out with a V8 engine
you need the engines ECU and the V8 gearbox
manual diff ratios can be optional

1997 -2002 engines will bolt in

you could go up the next commy V8 model it has roller rockers
you can have a v6 or v8 supercharged if you like

once all bolted in you need a mutt 2 diagnostic reader to reset all the keys and modules and immobilizer for it to start and run

http://forums.justcommodores.com.au/vt-vx-holden-commodore-1997-2002





26317726-igf4vixkefavsop0s5kuy20y-4-0.jpg

26317726-igf4vixkefavsop0s5kuy20y-4-1.jpg

26317726-igf4vixkefavsop0s5kuy20y-4-3.jpg

Oct 19, 2016 | Holden Cars & Trucks

1 Answer

My battery went flat and I jump started my car (Holden VT) now my stereo is locked. Dose anybody know how to unlock it. It's a eurovox radio unit.


Samantha, You need the VIN and the radio serial number. Take those into a Holden dealer to get the radio code and programming instructions from the dealer. They may want a small fee for the #. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

http://forums.justcommodores.com.au/vt-vx-holden-commodore-1997-2002/131983-vt-stock-radio-cassette-player-security-code.html
Radio Security code Street Commodores Online Forum
Go Technologies Eurovox FAQs

Aug 26, 2016 | Holden Cars & Trucks

1 Answer

Will ls1 go in vx commodore s 2000


yes VX V8s were fitted
depends on what state you live in
LS1 fitted may need a modification plate
needs the LS1 engine ecu and
and a few extra wiring and
join the just commodore forum for loads of helpful information
http://forums.justcommodores.com.au/vt-vx-holden-commodore-1997-2002

Jul 29, 2016 | Cars & Trucks

1 Answer

Holden Commodore vx 3.8 v6 turn signals don't turn off


check your wires that wounded it may cause trouble.

Mar 03, 2013 | Cars & Trucks

2 Answers

Reprogram remote key vx commocore


mr minit! locksmith! what area do you live in? most small workshops have a scan tool that will program commodore keys from vn to vy. hope this helps

Aug 04, 2009 | 2004 Isuzu Rodeo

3 Answers

Holden vx commodore immobiliser


to fix the key you need a screw driver to pry the to halves of the key casing apart (make sure you have a spare set) taking care not to damage the internal electronic component board, because this electronic circuit board (cct bd) is powered by a 3 volt battery (which is also used to run the bios on computers) can be purchased for about 3 dollars from **** smiths, you need a small pair of side cutters to cut the metal tag connections between the battery and the cct bd taking care to note which is the positive and negative tracks on the cct bd, then using a soldering iron desolder the metal tag connections from the cct bd take care not to damage the copper tracks on the cct bd, try to use the proper desoldering technique (the copper gauze or a suction gun) to remove excess solder from the metal tags because they need to be removed, when the tags are removed from the cct bd there is a small hole on each copper track for the positive and negative reconnections to the newly purchased battery, use light audio speaker wire, black for negative and red for positive, presolder the wire ends first then cut the bear ends down and solder to the tracks taking care not to cross tracks with the solder, then shorten the both positive and negative lengths so the battery and the wires will fit back into the casing of the key and resolder the wire connections to the battery, before closing the key casing test the key to see if the immobiliser is operating then relocate the ring seal and close the two casing together with tape or reglue with arildite glue. if your soldering technique is not up to scratch practice your technique until you feel confident and this should save you about $100

Aug 02, 2008 | Graco Spree 511 Holden Travel System...

Not finding what you are looking for?
Vehicle Parts & Accessories Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vehicle Parts & Accessories Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14380 Answers

Brad Brown

Level 3 Expert

16010 Answers

Are you a Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...