INSTALL M TNRCART is dispayed when I turn on My printer Epson Acualaser C4100

E101 error code ACULASER c9300

Access the manufacturer's web-site: http://support.hp.com
Enter 'C4100' and do a search.
Select the Operating System (Windows 7?) used on your new computer.
Download the device-driver.
Install it.
Print a test-page.

Epson C1100 toner detection is based on freq. your chip on the toner might be old or faulty.
The toner does not have contact point.. at the right side of the printer, there is a receiver, and at the side of the toner, there is a round chip..

Don't know what the error code is indicating but if you call the manufacturer they will identify it for you.

fist of all reunisall your printer driver ....
if problem dose not fix .
it means black colour laser section have problem so you can clean lens of laser if posible and replace laser secaner.


thanks

Ok this will take nerves of steel but it will work. Do you still have the disk that came with the printer to load it into Computer? If not, then go to the Acualaser website and poke around under their support section for Acualaser drivers. If you do then you can start right away. Go to start>control panel>printers>then right click on the printer and uninstall it. Restart the computer, put the disk back in to load the printer and the print wizard should lead you all the way through adding it back. Good luck, let me know how it goes.

http://multifunction.free-driver-download.com/HP/40554/HP-Photosmart-C4100-All-in-One-Series-Basic-Print-&-Scan-Driver-61.063.247.00-Windows-Vista(x32-x64).html
install driver from here then set as default in control panel printer and faxes.your printer.

You need to remove the cyan cartridge, and thoroughly clean the inside of the printer (please use proper printer cleaning kit, not a damp cloth!). The sensors can get crudded up with loose toner inside the machine.

Here is driver download page for your printer, insert OS version and proceed to download page:
HP Photosmart C4100 All-in-One Printer series

High ITConsult And MarkoP

The high pitched whine and the paper stopping just before the fuser (the hot) unit is a known issue on the C3000 and C4100. If you are still searching for the solution to this issue, let me know, as I now have a working fix for the problem.

Reply to this post for further info.