Hi, I am having problems with the remote for my Samsung BD-p1200. It seems the control buttons for turning on the player and most other buttons do no function. The only buttons that seem to function are the ones which turn on the TV and control the TV sound and TV inputs. I changed the batteries, but that did not solve the problem. I also took the batteries out and pushed one of the buttons for several seconds to drain the microprocessor. That did not work either. Can you help?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
On fornt of the player you have the buttons for opreation.You can use these buttons to operate your DVD player with out remote.
I have attached a image for your BD-P1600 player so your reference
1.DISC TRAY :Opens to accept a disc. 2.DISPLAY :Displays the playing status, time, etc. 3.Remote Control Sensor :Detects signals from the remote control. 4.OPEN/CLOSE BUTTON :Opens and closes the disc tray. 5.SEARCH/SKIP BUTTONS :Goes to the next title/chapter/track or goes back to the previous title/chapter/track. 6.STOP BUTTON :Stops disc playback. 7.PLAY/PAUSE BUTTON: Plays a disc or pauses playback. 8.POWER BUTTON :Turns the Blu-ray Disc Player on and off. 9.USB HOST:A USB memory flash stick can be connected here and used as storage when connected to BD-LIVE. It can also be used for firmware upgrades and MP3/JPEG playback.
This indicates a problem with the pickup head. First I would suggest cleaning the laser head with a disk made for that purpose. If this does not work, then I would suggest (if you have a background in electronics) taking the cover off and checking the bias voltages on the laser pick head (comparring them to the schematic values). What I believe is happening is just a dust problem, however if it is a circuitry problem, contact the manufacture or use the schematic/service manual to locat OEM parts.
I would, however try to clean the pickup head first.
Problem solved. I decided to use the learning function of my remote to learn the wanted commands of the original remote. The remote I used was a Sony RM-VL610 which could learn the original remotes functions easy and quickly. This is a very good remote for only $30 purchased at Target. The Macro commands were also entered rather easily. I did not try this method originally,because I thought it would be too time consuming and difficult. pcwg
I can see your struggling with this A little Bit.
On reading a review of this product, it seems without a remote. it,s about as much use as a chocolate kettle.
after a bit of searching around, i found this page of potential remote control suppliers.
You can show me your appreciation, By Rating the Post.