Question about Epson Stylus CX5800F All-In-One InkJet Printer

1 Answer

Ink cartridges positioning

I had replace the cartridges but did not put the cover down securely. Noticed "clicking" when I printed. succeeded in moving cartridges back to place they are when you put in new ones. Closed cover. Now cannot move them back to correct placement.

Posted by on

  • MIldred Woodrow Dec 18, 2007

    My book says that technical advice is available through e-mail. Nothing about there being a charge for it!!! Why should there be? I have a problem with your product..why can you not help me? silkpainter

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Your book does not refer to this site.

If your book tells you can get free advise then it will probally tell you their email address too ie www.epson.com

You have a problem with a Epson product not "ours" in any shape or form.

I have a problem with your demanding attitude and taking your frustration out on us here in this forum, I help many for free but it wont be you with your attitude, adjust it and we will see.

Posted on Dec 18, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just replaced all my inks and it is still telling me to replace my cartridges i also turned it on then off


  1. Open the scanner.
  2. Press the cp_button_14.gif Stop button to move the cartridges to the replacement position.

    Caution: Do not move the print head by hand; this may damage your all-in-one. Always press and release the cp_button_14.gif Stop button to move it
  3. Open the cartridge cover.
  4. Press down all the ink cartridges until they click into place to make sure they are properly seated.
  5. Close the cartridge cover and push it down until it clicks into place.
  6. Close the scanner.
  7. Press the cp_button_14.gif Stop button to begin charging the ink. This takes about 2 minutes.
    When the On light stops flashing and remains on, ink charging is finished.

    Caution:
    Never turn off the Epson Stylus CX while ink is charging or you'll waste ink.
    If the ink light flashes, press the cp_button_14.gif Stop button and press down all the cartridges securely.
    If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and store it in the same environment as the Epson Stylus CX with the label facing upward. Note that there is a valve in the ink supply port, making covers or plugs unnecessary, but care is needed to prevent the ink from staining items that the cartridge touches. Do not touch the ink cartridge ink supply port or surrounding area, and do not store the cartridge upside down.

    If you remove a low or expended ink cartridge, you cannot reinstall and use the cartridge.

Mar 22, 2011 | Epson Stylus cx7450 All-In-One InkJet...

1 Answer

How do i install my ink cartridges into my epson stylus nx125


Starts on page 23. http://files.support.epson.com/pdf/nx125_/nx125_qr.pdf
Replacing Ink Cartridges Make sure you have a new ink cartridge before you begin. You must install new cartridges immediately after removing the old ones. Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Note: Leave the expended cartridge installed until you have obtained a replacement, or the ink remaining in the print head nozzles may dry out. 1. Turn on your printer. 2. If an ink cartridge is expended, the error and ink lights on the control panel stay on. 3. Open the document cover, then open the ink cover. Caution: Do not remove the ink cartridge guard or you may damage the printer.24 Maintaining Your Printer 4. Press the y Stop button. If a cartridge is low or expended, the print head moves that cartridge to the replacement position to indicate that it should be replaced. The P Power light starts flashing. If two or more ink cartridges are expended, the expended cartridge at the far left moves to the replacement position. The P Power light starts flashing. If no cartridges are low or expended, the print head does not move. Note: Do not hold the y Stop button for more than three seconds, or the printer may start cleaning the print head. 5. Squeeze the tab on the cartridge and lift it up. Dispose of it carefully. Do not take the used cartridge apart or try to refill it. Warning: If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. Keep ink cartridges out of the reach of children.Replacing Ink Cartridges 25 6. Before you open the new cartridge package, shake it gently four or five times. Then remove the cartridge from the package. Caution: Do not touch the green chip on the front of the cartridge. This can damage the ink cartridge. 7. Remove the yellow tape from the bottom of the ink cartridge. Caution: Do not remove any other labels or seals, or ink may leak. 8. Insert the new ink cartridge into the holder and push it down until it clicks into place. 9. Press the y Stop button. If another cartridge is low or expended, it moves to the replacement position. Repeat steps 5 through 8 to replace any other cartridges that need to be replaced. When you press the y Stop button and no other cartridges need to be replaced, the print head moves to its home position and the printer starts priming the ink. This takes about 1 1/2 minutes.26 Maintaining Your Printer When the P Power light stops flashing and the error and ink lights go out, ink charging is finished. 10. Close the ink cover, then close the document cover. Caution: Never turn off the your Epson printer while ink is charging or you'll waste ink. If the error and ink lights remain on after the print head moves into its home position, an ink cartridge may not be installed properly. Press the y Stop button again, and then press the ink cartridge down securely. Note: If you replaced a cartridge while copying a document or photo, cancel printing and make sure your original is still placed correctly on the document table. Then copy your original again. If you remove a low or expended ink cartridge, you cannot reinstall and use the cartridge.

Mar 09, 2011 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

How to change ink cartridges on an Epson CX 3800


Be sure you have a new ink cartridge before you begin. Once you start replacing a cartridge you must complete all steps in one session.

1. Make sure the Epson CX printer is on.
2 Make sure the document cover is closed, then open the scanner
Caution: Do Not open the scanner when the document cover cover is open.
3. Press and release the " ink " button. The ink cartridge moves to the check position and the
" On " and " ink " lights flash. If one of the cartridges is low or empty, the printer moves the
cartridge to the _ink out mark.
Note: Don't hold down the " ink " button for 3 or more seconds or the printer starts cleaning the print head.
Caution: Do Not move the print head by hand; this may damage the printer, always press the ink
button to move it.
4. Press the " ink " button again
a. If more than one cartridge is low or empty, the next cartridge moves to the_ink out position.
b. If all of the empty or low cartridges have been identified, the print head moves to the ink
cartridge replacement position.
5. Open the cartridge cover.
6. Squeeze the tab at the back of the empty/low cartridge and lift it straight out.
7. Before you open the new ink cartridge package shake it four or five times, then remove it
from the package.
Caution: Do Not remove or tear the label on the cartridge; otherwise ink will leak.
Do Not touch the green chip on the front of the cartridge, this can damage the
ink cartridge.
8. Place the new ink cartridge into the cartridge holder and push it down until it snaps into
place.
a. Replace any other cartridges that need to be replaced.
9. Close the ink cartridge cover and press it until it clicks into place.
10.Close the scanner.
11. Press the " ink " button The print starts charging ink and the " On " light starts flashing. This
takes about one minute. When it's finished the " On " light stops flashing and remains on.
and the " ink " light goes out.
Caution: Never turn off the printer while the " On " light is flashing or you'll waste ink.
Note: If the " ink " light stays on ( not flashing ), the ink cartridge may not be installed correctly.
Press the " ink " button again and reinstall the ink cartridge until it clicks into place.

Feb 09, 2011 | Epson Office Equipment & Supplies

1 Answer

How do I install the printer cartrige? I do not have the booklet...


  1. Turn on your printer.

  2. Open the front cover.

The ink cartridge carrier moves and stops at the loading position unless the printer is busy.

  1. Press the tabs on the cartridge lids, then lift the lids.

  1. Remove the old ink cartridges.

  1. Store the cartridges in an air-tight container or dispose of them properly.

  2. If you are installing new ink cartridges, remove the sticker and transparent tape from the back and bottom of each ink cartridge.


NOTE: You can use your printer with one cartridge (color or black) at a time. To extend the life of your color cartridge and improve printing speed, install both a color cartridge and a black cartridge at the same time.
  1. Insert the new ink cartridges. Make sure the color ink cartridge is secure in the left ink cartridge carrier and the black ink cartridge is secure in the right ink cartridge carrier.

  1. Snap each lid closed.

  1. Close the front cover. The front cover must be closed to start a print job.

  1. Open the Dell Printer Solution Center by clicking Start® Programs or All Programs® Dell Printers® Dell Photo Printer 720® Dell Printer Solution Center.

  2. Click the Maintenance tab.

  3. Click Install a new print cartridge.

  4. Click Next.

  5. Select the type of cartridge you installed.

NOTE: Specify whether the cartridge is a new cartridge or an old cartridge (one that has been used before). If an old cartridge is incorrectly identified as New Cartridge in the Dell Printer Solution Center, ink levels may be incorrect.
  1. Click Next.

Dec 17, 2010 | Dell Inkjet 720 Printer

3 Answers

How do you load new printer cartriges


To replace an ink cartridge using the fonth.gif ink button, follow the steps below.
1. Make sure that the printer is on. The fontp.gif power light should be on, but not flashing.
2. Lower the output tray, then open the printer cover.
3. Press the fonth.gif ink button. The print head moves to the ink cartridge replacement position, the fontp.gif power light begins to flash, and the fonth.gif ink out light corresponding to the ink cartridge that needs to be replaced begins to flash or remains on.
4. Open the cartridge cover. Pinch the sides of the ink cartridge that you want to replace. Lift the cartridge out of the printer and dispose of it properly. Do not take the used cartridge apart or try to refill it.
5.Remove the new ink cartridge from its protective bag. Place the ink cartridge vertically into the cartridge holder. Then, push the ink cartridge down until it clicks into place. Do not apply excessive force to the cartridge.
6. When you are finished replacing the cartridge, close the cartridge cover and the printer cover.
7. Press the fonth.gif ink button. The printer moves the print head and begins charging the ink delivery system. The fonth.gif ink lights start flashing. This process takes about one minute to complete. When the ink charging process is finished, the printer returns the print head to its home position. The fontp.gif power light will stop flashing and remain on, and the fonth.gif ink out light will turn off. The fontp.gif power light will continue to flash while the printer is charging ink. Never turn off the printer while this light is flashing.




Nov 19, 2010 | Epson Office Equipment & Supplies

1 Answer

Put new black ink in but prints are differnt colors color ink is all most new pictures look like negitive


Here are the steps.

1.Please verify that the ink cartridges are intact and securely inserted into the printhead.

a.Lift the printer access door, then remove the ink cartridges from the printhead

b.Verify that the label on the ink cartridges is intact, and the cartridges are not damaged.

c.Insert the ink cartridges into the printhead, then press down firmly until you hear them click into position.

2.Clean the printhead.

a.Press the Menu button of the printer.

b.Use the down arrow key and go to Clean Printhead.

c.Press OK button then select Deep Clean.

3.Print Demo Page.

a.Press the Menu button of the printer.

b.Use the down arrow key and select Print Demo Sheet.

c.Press Ok button.


If issue persists,the printhead on your printer require replacement. Call 1.800.421.6699

Thanks.

Regards,

Neerak21

Sep 23, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

2 Answers

Don't know how to move the cartridges to replace the ink.


Please follow the instructions below to ensure correct installation:
  1. Lower the printer's output tray and open the top cover.
  2. Connect the power cable to the printer.
7a2fb58.jpg
And switch on the printer.

c1dd1e1.jpg
3fc5f43.jpg

The print heads will now move to the replacement position. If they do not move to a change position press the Red ink button on the printer.

  • Lift up the ink cartridge clamps.

  • 41c16be.jpg
    090c659.jpg

    Before you open the new ink cartridge package, shake it four or five times. Then remove it from the package.

    6e11c23.jpg

    Do not touch the green chip
    on the side of the cartridge. This can damage the ink cartridge.

    157f94d.jpg
    Remove the yellow tape from the bottom of the ink cartridge.

    3400723.jpg
    You must remove the yellow tape from the cartridge before installing it; otherwise, print quality may decline or you may not be able to print.

    If you have installed an ink cartridge without removing the yellow tape, take the cartridge out of the product remove the yellow tape, and then reinstall it.

    Do not remove the transparent seal from the bottom of the cartridge or the label on the cartridge; otherwise the cartridge may become unusable or ink will leak.

    bbca8a8.jpg
    Place the ink cartridge into the cartridge holder with the bottom down. Then push down the ink cartridge until it clicks into place.
    38585f1.jpg
    Repeat steps 4 to 6 for each ink cartridge.


  • Close the ink cartridge cover and press it until it clicks into place
  • 5ee2013.jpg
      If you find it difficult to close the cartridge cover, make sure all the cartridges are firmly seated. Press down on each cartridge until you hear it click into place. Do not attempt to force the cover closed.

    1. Close the printer cover and press the ink or start button to begin charging the system. Charging can take up to three minutes and is complete when the power light stops flashing.
    While the ink system is charging do not switch off the printer.


    Sep 16, 2008 | Epson Stylus 880 InkJet Color Printer

    1 Answer

    Print cartridges


    1. When one or more ink cartridges are empty, for example, Black, the LCD shows “Ink Empty Black” and “Open Cover.” Close the printer’s document support and the document tray.
    2. Lift the top cover to the open position until it locks securely into place.
    3. Pull the ink cartridge hook toward the front of the printer and remove the color ink cartridge displayed on the LCD. Place the cartridge in a plastic bag as it may still contain some residual ink and may leak.
    4. Open the new ink cartridge bag for the color shown on the LCD and remove the new ink cartridge. The cartridge cover may come off when you open the bag. This is not uncommon and will not damage the cartridge.
    5. Each color has its own correct position that is clearly labeled and color coded inside the printer. Keep the ink cartridge in an upright position when you insert it into slot. It will only fit in the correct direction. Press down on the ink cartridge until the hook snaps over it.
    6. If you replaced an ink cartridge while “Near Empty” was displayed on the LCD, the LCD may ask you to verify that the replacement cartridge was brand new one. Example: “Did You Change Black? 1.Yes 2.No.” For each new cartridge you installed, press 1 on the dial pad to automatically reset the ink dot counter for that color. If the ink cartridge you installed is not a brand-new one, select 2.

    Sep 16, 2008 | Brother MFC-5840CN All-In-One InkJet...

    1 Answer

    Epsom Sytlus DX4450


    Using the Ink Cartridge Replacement utility in Windows

    1. Open the Printers window by following the appropriate steps for your operating system.

    In Windows 2000: Click START > SETTINGS > PRINTERS.

    In Windows XP: Click START > CONTROL PANEL > PRINTERS AND FAXES or PRINTERS AND OTHER HARDWARE. (Select VIEW INSTALLED PRINTERS under PRINTER TASKS if no printers appear.)

    In Windows Vista: Click START > CONTROL PANEL > HARDWARE AND SOUND > PRINTERS.

    2. Right-click your printer model and select PRINTING PREFERENCES.

    3. Click the MAINTENANCE tab.

    4. Click the Ink Cartridge Replacement utility icon and follow the on-screen instructions to replace your ink cartridges as necessary.

    Caution:
    Never turn off the printer while the On light is flashing or you’ll waste ink. If the ink light flashes, press the Stop button and press down all the cartridges securely.



    Using the control panel

    1. Turn on the printer.

    2. Open the scanner and make sure its support locks in place.

    3. Press the STOP button. The print head moves to the ink mark to indicate which cartridge is low or expended.

    4. Press the STOP button again.

    If another cartridge is low or expended, it moves to the ink mark. Press the Stop button again to see if more cartridges are low or expended.

    If no other cartridges are low or expended, the print head moves to the replacement position on the right.

    5. Open the cartridge cover.

    6. Squeeze the tab on the cartridge and lift the cartridge straight up to remove it. Dispose of it carefully. Do not take the used cartridge apart or try to refill it.

    7. Before opening the new cartridge package, shake it four or five times.

    8. Remove the cartridge from the package, but be careful not to touch the green chip on the cartridge.

    9. Remove the yellow tape from the bottom of the cartridge.

    Caution:
    Do not remove any other labels or seals, or ink will leak.

    10. Insert the new cartridge into the holder and push it down until it clicks into place.

    11. Once you replace all the necessary cartridges, close the cartridge cover and push it down until it clicks into place.

    12. Release the scanner support and close the scanner.

    13. Press the Stop button to begin charging the ink. This takes about 1 1/2 minutes.
    When the On light stops flashing and remains on, ink charging is finished.

    Caution:
    Never turn off the printer while the On light is flashing or you’ll waste ink. If the ink light flashes, press the Stop button and press down all the cartridges securely.

    Jun 05, 2008 | Epson Printer

    Not finding what you are looking for?
    Epson Stylus CX5800F All-In-One InkJet Printer Logo

    41 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Epson Office Equipment & Supplies Experts

    Alun Cox

    Level 3 Expert

    2678 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18426 Answers

    Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...