Question about Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

1 Answer

The main brush will not spin

The vaccum still has suction but the main brush on the bottom will not spin. Please help!

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 111 Answers

I would guess the belt is broken. That happens often. Get a correct belt. Remove the brush roller. Wrap the belt around the roller and drive peg. Reasemble -- easier said than done, but keep trying.

Posted on Sep 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my Shark nv500 vaccum carpet brush is not spinning?


I am having the same issue. The brush won't even move when I turn it with my hand. I just posted this same question.

Aug 01, 2014 | Shark Rotator Professional Lift-Away...

1 Answer

No Suction/Brush not spinning on Bissell Powersteamer Pro Deluxeb


make sure hoses are clear and check belt

Oct 08, 2009 | Vacuums

2 Answers

Brush doesn't spin and there is no suction there either, the brushes move freely when manipulated manually


Check for clog in the hose or what ever connects the nozzel to the collection device. I pick up vaccum cleaners all summer, most new, all clogged, all from the trash.

If possible, take the machine outside, open the collection device, run the motor. Is there suction you can detect anywhere?

Sep 07, 2009 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

Twirly thing under the vacuum has stopped spinning


there is a belt that drives the beater brush. flip the unit over, you can remove the bottom cover by removing a couple of screws. to one side of the brush you will see a channel where the belt should be. go to you local walmart, sears or hardware store and in the vaccume section they will have belts, on each bag of belts will be a list of vaccumes that belt fits simply find yours. with the new belt simply lift the beater brush out at the belt channel side and install the belt around motor shaft and brush. then place brush back in place , be suer brush guides are in properly. this should do ya.

Aug 18, 2009 | Dirt Devil Featherlite Bagless Vacuum...

1 Answer

Roller brush will not move when vaccum is turned on


maybe the belt is broken. clean the unit and replace the belt.

May 23, 2009 | Kirby Ultimate G Bagged Upright Vacuum

1 Answer

Vaccum Cleaner


you probably broke the belt so check that. if the mains cord is damaged, you should replace it

Sep 18, 2008 | Hoover U8145-900 Savvy Bagless Upright...

1 Answer

Vaccum has no suction


Here is what we did to fix the problem of our vacuum having no suction.
We unscrewed the three screws on the back and took the hose off of the vacuum.  Then we took the hose outside and put the water hose through the vacuum hose and turned on the water.  After about 30 second the water pushed through a dust bunny the size of a fist and a marker.  Basically, the vacuum did not have suction because the hose was clogged with dust, etc.  After reassembling the vacuum, it worked just fine.  

May 11, 2008 | Kenmore 34923 / 34925 Progressive Bagged...

6 Answers

Vaccum has no suction


Need a new belt -- you might have suction but you need the brush to spin (hard to help without make or model, upright or canister)

Oct 17, 2007 | Kenmore 25614 / 25615 Progressive Bagged...

1 Answer

Help


as the hose fits into the base (if i am correct) the power at the base should be fine, make sure the base is clean and free from blockage, you say the brush doesn't spin, has the belt broken, if so replace it, (very cheap) and only a couple of screws to undo, the roller not rotating will effect the power of suction dramatically, start from there and see how you go if i have helped please rate me

Sep 15, 2007 | Hoover U8171-900 / U8172-900 / U8173-900 /...

Not finding what you are looking for?
Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum Logo

318 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dyson Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Samyfam
Samyfam

Level 3 Expert

379 Answers

Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...