Question about Office Equipment & Supplies

2 Answers

Alarm light blinking. wrong cartridge in LCD window.

I use only canon ink . I unpluged machine for 15 seconds then repluged. no luck I removed all 4 ink cartridges and put them back in no luck. please tell me what to do My e-mail is:burkered@aol.com

Posted by on

  • red52 Dec 17, 2007

    I removed 4 cartridges and cleaned with alcohol Idid it twice no luck i still have the same problum [wrong cartridge in lcd screen] please tell what to do.

  • red52 Dec 18, 2007

    I have a multipass mp730 canon copier the alarm light keeps blinking and wrong cartridge keeps flashing in lcd window I turned off power restarted I cleaned ink cartridge and contacts with alcohol useing Q-tips. what to do ????

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 383 Answers

Printing and Logging pH Meters with GLP and Smart Electrodes ... buffers (pH 4.01, 6.86, 7.01, 9.18 and 10.01) and wrong ... in the field as well as in the laboratory. An alarm time ... diagnose a fault and to display error codes on the LCD. PRINTER.

HI 98230 - HI 98240 Portable Microprocessor Printing and Logging pH ... ... buffers (4.01, 6.86, 7.01, 9.18 and 10.01pH) and wrong ... key, to move up or select function codes (with ALT) An alarm ... LCD and the indication "F 00" with the first digit blinking in

Portable Microprocessor Printing and Logging K - J - T Thermocouple ... ... in the field as well as in the laboratory. An alarm time ... the ALT and CFM keys to confirm. •If password is wrong ... diagnose a fault and to display error codes on the LCD. PRINTER


Good Luck, Please dont for get to Vote.Thank You.

Posted on Dec 18, 2007

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 231 Answers

Remove the new cartridge and clean contacts of cartridge and iside printer with Qtips / alcohol..you might have communication problem with cartridge due to dirty contacts..sometimes they get dirty fro spilled ink from jets..then retry

Posted on Dec 17, 2007

  • crispin melchor Dec 18, 2007

    i was hoping cleaning was your problem..Its most probably you have a bad print head..This print head has a logic chip that handles cartridge data and info..this can be bought at canon for less than $40 and repairable by you ..

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cannot turn on the printer. The green light blinks; the alarm light blinks. "CHECK PRINTER" appears on the LCD with 5100 in the lower right corner. I checked all the connections; turned...


According to the Canon troubleshooting website here are the steps to follow for the PIXMA MX310 and Error Code 5100:
-Remove the cartridges
-Inspect the cartridges to ensure all packaging is removed
-Reinstall the cartridges
-Press the ON/OFF button for 2 seconds
-Unplug the printer and wait 10 seconds
-Check the printer for any obstructions including packaging materials
-Remove the scanner cover
-Open the lid - check for paper that is stuck; these can be very small pieces, so look carefully
-Plug the printer back in and power it on.
If that does not solve the problem you will have to contact a service repair centre. Good luck.. thanks

Sep 05, 2011 | Canon PIXMA MX310 All-In-One Printer

1 Answer

Alarm lights keep blinking after I changed my printer ink.


E5 means cartridges error - to fix press the "stop\reset" button for 5-7 seconds and then release it.

You can also try this:

1) With the printer power turned off but connected to a power source, while pressing the Resume/Cancel button, press and hold the Power button.
(DO NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.)

2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.)

3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and
Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light
alternately, Alarm in orange and Power in green, starting with Alarm LED.)

4) When the Power LED lights in green, press the Resume/Cancel button the specified number of time(s)according to the function listed in the table below. (Each time the Resume/Cancel button is pressed, the Alarm and
Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)

4 times----Green (Power)------Waste ink counter resetting

Apr 07, 2010 | Canon PIXMA MP240 All-In-One InkJet...

2 Answers

I have a Canon MulitPass MP730. Wrong Cartridge message.


It's worth repairing, That error on a Canon is saying that the printhead is bad, not your cartridges. The part number for your printhead is stamped on the side of the printhead could be QY6-0049-000 but I'm not sure.

Jan 10, 2010 | Canon MultiPASS MP730 All-In-One InkJet...

2 Answers

Display flashes e2 alarm light blinking won't print or copy


E2 mean reload the paper correctly and press Black or Color key from panel board.

Dec 01, 2009 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

Both lights are blinking and will not print


they call that flash codes or error codes. please count
count how many times the lights flash, here is what they mean

Alarm / Power light flashes orange 7 times consecutively (ink cartridge installed incorrectly)

Alarm / Power light flashes orange 5 times consecutively (Print Head Error)

Alarm / Power light flashes orange 4 times consecutively (Out of Ink Error)


Alarm / Power light flashes orange 3 times consecutively (Paper Jam Error / Cover Error)

Alarm / Power light flashes orange 2 times consecutively (Load Paper / Paper Feed Error)

Alarm / Power light flashes orange 16 times consecutively (This FINE Cartridge has previously been used)

Alarm / Power light flashes orange 15 times consecutively (FINE cartridge not recognized)

Sep 20, 2009 | Canon Pixma iP2600 Photo InkJet Printer

6 Answers

Canon MultiPass F60


You need to do the print head cleaning. The steps are listed below.

Print Head Cleaning / Head Refreshing
If the printed Nozzle Check Pattern is broken, missing, or a specific color is not printed, clean the print head.

1. Press the <Menu> button on the printers operation panel.

2. Press the left [<] or right [>] arrow buttons to select [MAINTENANCE].

3. Press the <Set> button.

4. Press [<] or [>] to select the cleaning setting you want. Select [HEAD CLEANING] for normal print head cleaning. Select [HEAD REFRESHING] for deep print head cleaning.

Note: [HEAD REFRESHING] uses more ink than [HEAD CLEANING], so perform [HEAD REFRESHING] only when necessary.

5. Press <Set>.

6. Print a Nozzle Check Pattern and perform at least two Head Refreshing if the pattern is not correct.

Sep 15, 2008 | Canon MultiPASS F60 All-In-One InkJet...

4 Answers

Canon mp160 prienter alarm light ,power light is blinking&lcd is keep on chngng the nos


hi dear

this the error code
E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error
E2-2 No paper (ASF)
E3-3 Paper jam
E4 No ink
E5-5 The ink cartridges are not installed or a non-supported ink cartridge is installed ,
or the ink cartridges are not installed properly
E8 Waste ink absorber full, or platen waste ink absorber full




First, download the software at http://www.box.net/shared/4yblbn34kg

Secondly, to run the software your printer has to be in service mode. Do that by
- unplug cable
- press and hold "power" button
- plug cable
- press "resume" and release
- release the "power" button
At this stage, your computer will detect a new hardware

Run the software.

oke

Jan 18, 2008 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Alarm light is flashing. cannot print


hi dear

this the error code
E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error
E2-2 No paper (ASF)
E3-3 Paper jam
E4 No ink
E5-5 The ink cartridges are not installed or a non-supported ink cartridge is installed ,
or the ink cartridges are not installed properly
E8 Waste ink absorber full, or platen waste ink absorber full




First, download the software at http://www.box.net/shared/4yblbn34kg

Secondly, to run the software your printer has to be in service mode. Do that by
- unplug cable
- press and hold "power" button
- plug cable
- press "resume" and release
- release the "power" button
At this stage, your computer will detect a new hardware

Run the software.

oke


Aug 31, 2007 | Canon PIXMA MP160 All-In-One Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8074 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

Marvin
Marvin

Level 3 Expert

82313 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...