Question about Price Pfister Genesis Luxury Kitchen Faucet with Pull-Out Spray ....

1 Answer

Handle keeps wont stay up, keeps turning off.

When turned on the handle stays on ( up ) for a bit before falling, turning the water off. can I fix it or should I just replace it?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 43 Answers

Yes you can repair this. Sounds like the valve springs and the rubber valve seats may be worn. There are repair kits available at Lowe's, Home Depot, Wal-Mart, ect. for these faucets. And they usually come with the "tool" you need to remove the faucet handle and the cap and seal nut. After that, it's pretty straightforward, and easy. Two springs, two seats, and an O ring or two, and your'e done. Just make sure to shut off the supply lines to the sink before you start and open the faucet handle to remove any pressure left after you cut the water off. Tighten the cap or seal nut securely after the new springs and seats are in, and you should be good to go.

Posted on Sep 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I get my freezer door handle to stay on?


If the screws are still good, put some "lock tight" on them and tighten. This should fix the problem

Jun 17, 2014 | Amana AFD2535DEW - 25 cu. ft. French Door...

1 Answer

Kirby heritage 2 handle wont stay in the upright posision keeps falling backwards


Two things; your bag may be too full and needs replaced. (it doesn't take much to make them top-heavy) or the pin at the back of the base of the handle is not extended.

Feb 14, 2013 | Kirby Heritage II Vacuum

1 Answer

The lever that turns the water on doesn't stay up. Can't lift the handle halfway to get a little water because the handle falls to the off position.


Sounds like the collar that locks down the stem is in need of tighting to get some resistance to hold handle in place.
Remove handle to acces this collar and to tighten.

May 05, 2011 | American Standard 4205.100.021 Reliant+...

1 Answer

I have a GE Side by Side (model GSL22JFRJBS) and am having several problems and I'm not sure if they are connected or if I just have bad luck. 1st: the freezer and fridge are not staying cold. The freezer...


HI change the main board its about $150-200. Will fix all your problems except the lightbulb would be a lightsocket problem or the bulb you put in is bad, or door switch.


Sean

Mar 30, 2011 | GE GSL22JFPBS Side by Side Refrigerator

1 Answer

The battery door on my hp photosmart M525 cracked and will not stay shut, therefore batteries fall out. I used a piece of tape keep the door shut, but it is a nice camera and I want it to work the way it...


Okay, from what you are saying its the weight of the battery that makes the battery cover fall of so i would apply a little, emphasis on little bit of glue before i put in the battery to hold the battery in place so the battery stays in even when the cover is not in place, then find a more stylish way of keeping the cover in place, maybe A LITTLE glue to the ridges that the cover slides on will be enough, you wont have any problem prying both lose when you have to, A LITTLE, lol , Hope this helps..

Oct 27, 2010 | Cameras

1 Answer

The unit is several years old - the float keeps falling in and the unit shows full -can I get a new float and will that fix the problem?


If the float falling in tells you its full probably not. Unless the float floats off a switch. Then a new float that wont fall off would probably do it.

If the float keeps falling off...why not tie a small piece of fishing line to it and suspend it above the switch? It will stay where its needed until water lifts it up.

Jun 27, 2010 | Maytag M7DH45B2A Dehumidifier

1 Answer

Detergent bottle keeps falling off, wont stay put and clean water isn't emptying at all


The tank assembly needs to be replaced. Keep your tank handle. The other problem is your water not dispensing. There are electric solenoids and a pump that control dispensing soap and water. Take it to a repair shop for complete diagnosis before you replace the tank. The new tank is better, both soap and water tanks are in one assembly

Oct 04, 2009 | Hoover Vacuums

1 Answer

My Danze kitchen faucet is a single lever with spray attachment. The lever does not catch (stay at a desired position). I have tried adjusting the screw under the decorative plug but not luck. Therefore I...


That screw just hods the handle on. If you partially unscrew it, you can remove the handle. Inderneath it there will be a large nut holding the faucet together.

It is possible that the nut just needs to be tightened. It is also possible that the stem/washers etc are worn and it needs to be rebuilt. (replace the stem/washers)

When they get worn things loosen up a bit.

Don't forget to shut the water off under the sink first.

Aug 23, 2009 | Plumbing

1 Answer

Door knob will not stay set. Keeps slipping out.


i would say the only fix for it is a replacement.sounds like its wore out, sorry

Jul 11, 2009 | Kwikset Sheridan Handle Set

1 Answer

Handle will not stay open


the reason behind this is because when its part opened theres not enough pressure to keep it open, but when you open it highre it stays open, another reason could be due to the water outlet strainer being blocked, remove this & give it a clean out & see how it goes?
Kindly
Richie

Dec 07, 2008 | Danze D403412 Melrose Single Handle...

Not finding what you are looking for?
Price Pfister Genesis Luxury Kitchen Faucet with Pull-Out Spray .... Logo

292 people viewed this question

Ask a Question

Usually answered in minutes!

Top Price Pfister Plumbing Experts

bwbconstruct

Level 1 Expert

23 Answers

john h

Level 3 Expert

12104 Answers

TED

Level 1 Expert

23 Answers

Are you a Price Pfister Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...